Module điều khiển 2 trục động cơ bước – Servo ICP DAS I-8091W
Features
- 2-axis Independent, Simultaneous Stepping Motor Control/Servo Motor Control (Pulse Input Type)
- Maximum Pulse Rate: 1 M pps
- Maximum Step Counts: 232 – 1 Steps
- Embedded CPU
- Command Type Interface
- 2-axis Linear, 2-axis Circular Interpolation
- Automatic Trapezoidal Acceleration/Deceleratio.
- Output Pulse modes : CW/CCW or Pulse/Direction
- Output Polarity can be Programmable
- 3 Optical Isolated Dgital Inputs per Axis for Limit Switches
- Programmable Limit Switch Initial Condition as Normal Open (N.O.) or
Normal Close (N.C.)
Introduction
I-8091W stepping motor control card is a micro-computer controlled, 2-axis pulse generation card. It includes a 2K bytes FIFO to receive motion command from host. A micro-computer for profile generation and protection, 2-axis DDA chip to execute DDA function when interpolation command is used, 2500Vrms optical isolation inserted for industrial application.
Applications
- X-Y Table
- Fix-Pitch Stamping Machine
- Transfer Machine
- Spinner
- Loader/Unloader
Specifications
| Motor Control Output | |
| Output Axis | 2-axis |
| Maximum Pulse Rate | 1 Mpps |
| Output Pulse Mode | 1. CW/CCW 2. Pulse/Direction |
| Maximum Step Counts | 232 -1 steps |
| Limit Switches | 3 optical isolated inputs per axis |
| Interpolation Command | 2-axis linear, 2-axis circular |
| Intra-module Isolation, Field to Logic | 2500 Vrms |
| LED Display | |
| LED Display | 1 LED as Power Indicator 7 LED as Status Indicator |
| Power | |
| Power Consumption | Max. 3.9 W |
| Environment | |
| Operating Temperature | -25 ~ 75°C |
| Storage Temperature | -30 ~ 75°C |
| Humidity | 5 ~ 95%, non-condensing |
| Dimensions | |
| W x L x H | 30 mm x 102 mm x 115 mm (Detail) |
Ordering information
| I-8091W CR | 2-axis Stepping/Servo motor Control Module (RoHS) |
| Standard Pack | I-8091W x 1, User’s Manual x1, CA-PC25M x 1 |
