Bộ lập trình PLC Cimon CM3-SP32PDTF
16 kênh đầu vào số (DI) + 16 kênh đầu ra số (DO), truyền thông 1 cổng RS-232, 1 cổng RS-485, 2 cổng Gigabit Ethernet, USB C Loader, SD/MMC Card Slot
The PLC-S Plus CPU offers ultra-fast processing, extended operating temperature (-20 to +70°C), and secure DIN rail mounting for easy installation. With support for up to 15 expansion modules and 512 I/O points, it’s built for scalable, high-performance automation and reliability.
Tính năng
- Class 1, Division 2 Rating*
- Extended operating temperature: -20 to +70 °C
- Under 20ns processing speed
- Easy + secure DIN rail mounting
- Add up to 15 PLC expansion modules
- Up to 512 I/O
- Dual ethernet ports
- 24V DC power
- Easy access run/stop control
- Micro SD card reader
- USB-C loading port
- RS232/RS422/485 serial ports
- Push terminal type
- SP32PDCF: 16 DI (SINK&SOURCE) & 16 DO (SOURCE)
- SP32PDTF: 16 DI (SINK&SOURCE) & 16 DO (SINK)
- SP16PDRF: 8 DI (SINK&SOURCE) & 8 DO (RELAY)
- Supported Protocols:
- EtherNet/IP Server
- EtherCAT*
- Modbus TCP/RTU Master/Slave
- Profinet (Slave)*
- MQTT
Thông số kỹ thuật
| Part Number | CM3-SP32PDTF | CM3-SP32PDCF | CM3-SP16PDRF | |
| Power supply | 12-24 VDC, 0.58 A, Tolerance : -5%, +10% | |||
| Power Consumption | 4.8W (MAX: 23.9W) | 4.8W (MAX: 23.8W) | 5.7W (MAX: 26.5W) | |
| Program Control Method | Cyclic Execution, Time Driven Interrupt, Stored Program | |||
| Total Data Memory (words) | 243,989 (Device 64,789, Global Var 179,200) | |||
| User Data Memory | 512KB (PLC Program : 128KStep) *ST program not included | |||
| Inrush Current | 30A Peak | |||
| Permissible Instantaneous Power Failure Time: |
50 ms | |||
| Dielectric Strength | Between power and FE terminals | 1,500V AC, 1 minute | ||
| Between output and FE terminals | 3,000V AC, 1 minute | |||
| Between power and input terminals | 3,000V AC, 1 minute | |||
| Between power and output terminals | 3,000V AC, 1 minute | |||
| Between input and output terminals | 500V AC, 1 minute | 3,000V AC, 1 minute | ||
| Insulation Resistance | Between power and FE terminals | 100MΩ or higher (1,000V DC megger) | ||
| Between output and FE terminals | 100MΩ or higher (1,000V DC megger) | |||
| Between power and input terminals | 100MΩ or higher (1,000V DC megger) | |||
| Between power and output terminals | 100MΩ or higher (1,000V DC megger) | |||
| Between input and output terminals | 100MΩ or higher (1,000V DC megger) | |||
| I/O Control Method | I/O Refresh, Directed by program instruction | |||
| Program Language | IL (Instruction List), LD (Ladder Diagram), SFC (Sequential Function Chart), FBD (Function Block Diagram), FBD Extension, ST (Structured Text) | |||
| Data Processing Method | 32-bit (4 Bytes) | |||
| Intructions | Sequence | 60 | ||
| Application | 480 | |||
| Processing Speed | LD | 16 ns/Step | ||
| MOV | 33ns/Step | |||
| Floating-point Arithmetic | +, -, x, / : 41 ns/Step | |||
| Floating-Point Arithmetic | Supporting instructions for floating-point arithmetic | |||
| Number of Program Blocks | Maximum 128 blocks | |||
| Max Expansion Blocks | CPU + Max 15 expansion blocks | |||
| Operation Mode | Remote Run, Remote Stop | |||
| Periodic Interruption | Maximum 15, cycle setting (1–60,000 ms, Unit: 1 ms), priority setting (0–14) | |||
| Data Preservation Against Power Failure: |
K device and retention (Latch) in M, L, T, C, S, D device Devices that use “Retain” option in Global Variable | |||
| Watch Dog Timer (WDT) | 10–10000 ms (Unit: 10 ms) | |||
| Restarting | Cold, Hot Restart | |||
| Timer | Cycle: 0.01 s-6,553.5 s (Either 10 or 100 ms) On Delay, Addition, Monostable, Retriggerable |
|||
| Counter | Counter range: -32,768–32,767 Up Counter, Down Counter, Up-Down Counter, Ring Counter |
|||
| PID | 32 Channels, Auto-Tuning | |||
| Self-diagnosis | Processing delays, memory issues, I/O / Battery / Power error, WDT | |||
| Restarting | COLD, HOT Restart | |||
| Timer | Cycle: 0.01-6553.5 s (Either 10 or 100 ms) On Delay, Addition, Monostable, Retriggerable TC (Current Value), TS (Setting Value) |
|||
| Counter | Counter range: -32,768 – 32,767 Up Counter, Down Counter, Up-Down Counter, Ring Counter CC (Current Value), CS (Setting Value) |
|||
| PID | 32 Channels, auto-tuning | |||
| Communication Channels | USB | USB 2.0 (C type): For Loader Protocol | ||
| Serial | RS-232C (Max 115,200 bps), RS-485 (Max 115,200 bps) 1 port each CICON Loader, CIMON-HMI, Modbus RTU Master/Slave |
|||
| Ethernet | 10/100/1000 Base-T/TX 2 ports CICON Loader, CIMON-HMI, MODBUS TCP Master/Slave |
|||
| Event Log | Max 100 logs (Power, Mode, Error) | |||
| Etc. | I/O Reservation, RTC, Online Edit Option: SD/MMC Slot | |||
| Capacity of Scan Program | 128k steps | |||
| RAM Backup | Backup Data: Program, Parameter, Latch data, Global var, clock data | |||
| RTC | Battery | Lithium primary battery (CR2032) | ||
| Battery Life | Approx. 8 years | |||
| Replacability | Possible | |||
| Memory Card | Spec. | SD Memory Card: FAT32, 32 GB | ||
| Function | Firmware up/down grade, Program download, Device Memory Backup | |||
| Memory Type | X | 8192 | ||
| Y | 8192 | |||
| M | 65536 | |||
| L | 65536 | |||
| K | 65536 | |||
| F | 2048 | |||
| T | 4096 | |||
| C | 4096 | |||
| S | 100*100 steps | |||
| D | 32767 Words (524,272) | |||
| Z | 1024 words | |||
| Q | 512 words | |||
| R | 16 words (index) | |||
| Input filter | 3 to 200ms (selectable in increments of 1ms) | |||
| Subroutines | Yes | |||
| For/Next Loops | Yes | |||
| Math (Interger and Hex) | Yes | |||
| Self-Diagnosis | Monitoring process delay, WDT (Detects delay of scan time), Memory error, I/O error, Low Battery Power ON/OFF Status | |||
| Password Security | Yes | |||
Thông tin đặt hàng
- CM3-SP32PDTF
128K step, DI16/DO16 (TR Sink), USB C Loader, SD/MMC Card Slot, RS232C 1CH, RS485 1CH, Gigabit Ethernet 2CH, Push-in terminal
Tài liệu
Catalog + Manual