Bộ chuyển đổi DeviceNet Slave sang DCON Master ICP DAS I-7241D
The I-7241D is the communication gateway between DeviceNet and DCON protocols. It is a DeviceNet slave device in the DeviceNet network, which functions as a “Group 2 Only Slave” device, and supports “Predefined Master/slave Connection Set”. In the DCON network, the I-7241D is a DCON master and can access the data of the I-7000 or I-87k series modules. The utility software is given to configure the device parameters and build EDS file for the DeviceNet slave device. Through the I-7241D, the DeviceNet master can quickly integrate the I-7000 and I-87K series modules into the DeviceNet network.

Applications
- Control System
- Building Automation
- Factory Automation
- Distributed data acquisition
Features
-
NMT: Slave
-
Support Predefined Master/slave Connection Set
-
Dynamic Assembly Objects Mapping
-
Support Offline Connection Set, Device Heartbeat message and Device Shutdown message
-
Provide Assembly object
-
Dynamic Product EDS File
-
I/O operating modes: Polling, Bit-Strobe, Change of State/Cyclic
-
Support max 15 I-7K/I-87K IO modules
-
Explicit & I/O length: 240 bytes max.
-
Provide friendly Utility to configure
-
Baud Rate: 125Kb, 250Kb, 500Kb
-
On-line change baud rate and MAC ID of CAN
-
7-segmemt LED to show operation mode, MAC ID, baud rate and error code
Utility
The I-7241D Utility is help users to configure the modules, and has following features:
-
Support auto-scan I-7K/I-87K modules
-
Auto-scan I-7k/I-87K modules connected with I-7241D COM Port
-
Show I-7k/I-87K modules configuration
-
Show Application and Assembly Objects configuration
-
Support IO connection path setting
-
Support EDS file creating

Usage
The simple steps about how to use DNS_DCON gateway are described as follows:

Hardware Specifications
|
Hardware
|
|
|
Watchdog
|
Watchdog IC
|
|
CAN Interface
|
|
|
Controller
|
NXP SJA1000T with 16 MHz clock
|
|
Transceiver
|
NXP 82C250
|
|
Connector
|
5-pin screwed terminal block (CAN_L, CAN_H, N/A for others)
|
|
Isolation
|
1000 VDC for DC-to-DC, 2500 Vrms for photo-couple
|
|
Terminator Resistor
|
Jumper for 120 Ω terminator resistor
|
|
Protocol
|
DeviceNet Volume I ver2.0, Volume II ver2.0
|
|
UART Interface
|
|
|
COM 1
|
RS-232 (For configuration)
|
|
COM 2
|
RS-485 (Self-turner inside)
|
|
Transmission Distance (m)
|
Depend on baud rate (for example, max. 1200 m at 9.6 kbps )
|
|
Baud Rate (bps)
|
1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200
|
|
Protocol
|
DCON
|
|
LED
|
|
|
Round LED
|
MS LED, NS LED, IO LED
|
|
5-digit 7 Segment
|
Yes
|
|
Power
|
|
|
Power supply
|
Unregulated +10 ~ +30 VDC
|
|
Protection
|
Power reverse polarity protection, Over-voltage brown-out protection
|
|
Power Consumption
|
3W
|
|
Mechanism
|
|
|
Dimensions
|
72mm x 122mm x 33mm (W x L x H)
|
|
Environment
|
|
|
Operating Temp.
|
-25 ~ 75 ℃
|
|
Storage Temp.
|
-30 ~ 80 ℃
|
|
Humidity
|
10 ~ 90% RH, non-condensing
|
Ordering Information
|
I-7241D-G
|
DeviceNet Slave / DCON Master Gateway |
|
I-7241D-G CR
|
DeviceNet Slave / DCON Master Gateway (RoHS) |
