Injector PoE 48 VDC ICP DAS tNS-200IN
Features
- Auto-detection of PD (powered devices)
- Power Sourcing Equipment (PSE) operation
- Over-temperature, over-current and over/under-voltage detection
- Supplies up to 15.4 watts
- No user settings
- Tiny packaging fits on your DIN-Rail
- Cost-effective for tNS-200IN
Introduction
The tNS-200IN/tNS-200IN-24V single port PoE Injector supports PoE powered devices in industrial environments. The tNS-200IN/tNS-200IN-24V delivers both data and power over a single standard Ethernet cable to a PoE powered device designed to receive both data and power through its RJ-45 port connector.
The tNS-200IN-24V is designed with +24 VDC to +48 VDC boost for PoE application where 48 VDC power supply is not available.
Specification
| Interface | |||
| RJ45 ports | 1 for Ethernet in, 1 for PoE out | ||
| LED Indicators | Power, Power Device is detected | ||
| Power Input | |||
| Input Voltage for tNS-200IN | +46 ~ +53 VDC | ||
| Input Voltage for tNS-200IN-24V | +18 ~ +32 VDC | ||
| Power consumption for tNS-200IN | 0.4 A@ 48 VDC with PD full loading | ||
| Power consumption for tNS-200IN-24V | 0.9 A@ 24 VDC with PD full loading | ||
| Protection | Power reverse polarity protection | ||
| Frame Ground for EMS Protection | Yes | ||
| Connection | 4-Pin Removable Terminal Block | ||
| PoE Technology | |||
| PoE Compliance | 100% IEEE 802.3af compliant | ||
| PoE Classification | PSE (Power Sourcing Equipment) | ||
| PoE Voltage | +46 ~ +48 VDC depending on power input | ||
| PoE Power | Up to 15.4 watts | ||
| PoE Operation | Automatic detection and power management | ||
| PoE Pin assignments | V+ (Pin 4,5), V- (Pin 7,8) | ||
| PoE disconnect mode | DC disconnect | ||
| Mechanical | |||
| Casing | Plastic | ||
| Flammability | UL 94V-0 | ||
| Dimensions | 52 mm x 86 mm x 27 mm (W x L x H) | ||
| Installation | DIN-Rail | ||
| Environmental | |||
| Operating Temperature | -40 ~ +75 °C | ||
| Storage Temperature | -40 ~ +85 °C | ||
| Ambient Relative Humidity | 10% ~ 90% RH, non-condensing | ||
Ordering information
| tNS-200IN CR | PoE Injector for 1 PoE port (uses unused pairs), 48 V input (RoHS) |
| tNS-200IN-24V CR | PoE Injector for 1 PoE port (uses unused pairs), 24 V input (RoHS) |