Switch công nghiệp Real-time Redundant Ring 3 cổng Ethernet + 2 cổng quang Multi Mode SC ICP DAS RS-405AFC-T
Features
- Automatic MDI/MDI-X crossover for plug-and-play
- Each port supports both 10/100 Mbps speed auto negotiation
- Full duplex IEEE 802.3x and half duplex backpressure fl ow control
- 3.2 Gbps high performance memory bandwidth
- Supports operating temperatures from -30°C ~ +75°C (For RS-405AF/RSM-405AF series)
- Redundant Power Inputs +12 VDC ~ +48 VDC (For RS-405AF/RSM-405AF series)
- Power failure alarm by relay output
- Modbus remote monitoring
- Supports Modbus OPC Server
- Store-and-forward architecture
- Built-in Cyber-Ring redundant technique
- Frame buffer memory: 512 Kbit
- 1024 MAC addresses
- DIN-Rail
Introduction
The RS-405F/RS-405AF series is a 5-Port Industrial Ethernet (10/100Base-TX) Real-Time Redundant Ring Switch. The RS-405F/RS-405AF series supports 10/100M auto-negotiation feature and auto MDI /MDIX function. It can automatically switch the transmission speed (10 Mbps or 100 Mbps) for corresponding connections. The connectors of Ethernet port are shielded RJ-45. The shielded RJ-45 connectors offer a high reliability Ethernet environment for industrial control and automation.
Built-in ICP DAS Cyber-Ring technique that enable multiple switches to be placed into a redundant ring. Typically it detects and recovers from a copper link failure within approximately 20 ms V for the majority of applications a seamless process. The RS-405F/RS-405AF series is much more easy to use and absolutely free of software setting. After unpacking from the shipping case, it just takes one or two dip or rotary switch to make it work.
The RS-405F/RS-405AF series provides two power inputs that can be connected simultaneously to live DC power sources. If one of the power inputs fails, the other live source acts as a backup to automatically support the RS-405F/RS-405AF series ‘s power needs. And, the relay output facility can deliver warning signal while dual power or network link failure.
Comparison Table
| Models | RS-405F | RSM-405F | RS-405AF | RSM-405AF |
| Input Voltage Range | +10 ~ 30 VDC (redundant input) | +12 ~ +48 VDC (Non-Isolation, redundant input) | ||
| Casing | Plastic | Metal | Plastic | Metal |
| Operating Temperature | 0 °C~ +70°C | -30 °C~ +75°C | ||
| Installation | DIN-Rail | DIN-Rail or Wall Mounting | DIN-Rail | DIN-Rail or Wall Mounting |
| Dimensions (W x L x H) (Unit: mm) |
64 x 110 x 97.5 | 72.5 x 102 x 110 | 64 x 98 x 110 | 72.5 x 102 x 110 |
Specification
| Models | RS-405F series | RSM-405F series | RS-405AF series | RSM-405AF series | |
| Technology | |||||
| Standards | IEEE 802.3, IEEE 802.3u, IEEE802.3x | ||||
| Processing Type | Store & forward wire speed switching | ||||
| MAC Addresses | 1024 | ||||
| Memory Bandwidth | 3.2 Gbps | ||||
| Flow Control | IEEE 802.3x flow control, back pressure flow control | ||||
| Redundant strategy | STP, Ring (ICP DAS) | ||||
| Protocol | Modbus/RTU, Modbus/TCP, OPC, STP, Cyber Ring | ||||
| Interface | |||||
| RJ-45 Ports | 3 x 10/100BaseT(X) auto negotiation speed, F/H duplex mode, and auto MDI/MDIX connection | ||||
| Fiber Optics Port | 2 x 100 Base-FX | ||||
| LED Indicators | 10/100M, Link/Act/Backup, Full duplex/Half duplex (Fiber Port) | ||||
| Ethernet Isolation | 1500 Vrms 1 minute | ||||
| Frame Ground for EMS Protection | Yes | ||||
| Ethernet Transmission distance | Ethernet : 2-pair UTP/STP Cat.3,4,5, EIA/TIA-568 100-ohm Fast Ethernet : 2-pair UTP/STP Cat. 5, EIA/TIA-568 100-ohm |
||||
| Multi Mode | Multi Mode Fiber Cables | 50/125, 62.5/125 or 100/140 gm | |||
| Distance | 2 km, (62.5/125 gm recommended) for full duplex | ||||
| Wavelength | 1300 or 1310 nm | ||||
| Min. TX Output | -20 dBm | ||||
| Max. TX Output | -14 dBm | ||||
| Max. RX Sensitivity | -32 dBm | ||||
| Max. RX Overload | -8 dBm | ||||
| Budget | 12 dBm | ||||
| Single Mode (Standard) | Single-mode fiber cables | 8.3/125, 8.7/125, 9/125 or 10/125 gm | |||
| Distance | 30 km, (9/125 gm recommended) for full duplex | ||||
| Wavelength | 1300 or 1310nm | ||||
| Min. TX Output | -15 dBm | ||||
| Max. TX Output | -8 dBm | ||||
| Max. RX Sensitivity | -34 dBm | ||||
| Max. RX Overload | -5 dBm | ||||
| Budget | 19 dBm | ||||
| Single Mode (60T) | Single-mode fiber cables | 8.3/125, 8.7/125, 9/125 or 10/125 gm | |||
| Distance | 60 km, (9/125 gm recommended) for full duplex | ||||
| Wavelength | 1300 or 1310nm | ||||
| Min. TX Output | -5 dBm | ||||
| Max. TX Output | 0 dBm | ||||
| Max. RX Sensitivity | -35 dBm | ||||
| Max. RX Overload | -5 dBm | ||||
| Budget | 30dBm | ||||
| Ethernet Cables | 10 Base-T (Cat.3, 4, 5 UTP cable; 100m Max.) 100 Base-TX (Cat.5 UTP cable; 100m Max.) |
||||
| Management interface | Console, DIP/Rotary Switch | ||||
| Alarm output | Relay | ||||
| Power Input | |||||
| Input Voltage Range | +10 ~ +30 VDC (Isolation,redundant input) | +12 ~ +48 VDC (Isolation, redundant input) | |||
| Alarm Contact | One relay output with current carrying capacity of 2 A @ 30 VDC | ||||
| Power Consumption | 0.4 A @ 24 VDC | ||||
| Protection | Power reverse polarity protection | ||||
| Mechanical | |||||
| Casing | Plastic | Metal | Plastic | Metal | |
| Environmental Rating | IP30 | ||||
| Dimensions (W x L x H) | 64 mm x 98 mm x 110 mm | 72.5 mm x 102 mm x 110 mm | 64 mm x 98 mm x 110 mm | 72.5 mm x 102 mm x 110 mm | |
| Installation | DIN-Rail Mounting | DIN-Rail or Wall Mounting |
DIN-Rail Mounting | DIN-Rail or Wall Mounting |
|
| Environmental | |||||
| Operating Temperature | 0 °C~ +70°C | -30 °C~ +75°C | |||
| Storage Temperature | -20 °C ~ + 85 °C | -40°C ~ +85°C | |||
| Ambient Relative Humidity | 10 ~ 90% RH, non-condensing | ||||
| Accessories | |||||
| Include Cable | CA-090510 x 1 | ||||
Ordering information
| RS-405FC CR | 5-Port Real-time Redundant Ring Switch with 2-Fiber Port, Multi Mode, SC Type (RoHS) |
| RS-405FCS CR | 5-Port Real-time Redundant Ring Switch with 2-Fiber Port, Single Mode, SC Type (RoHS) |
| RS-405FT CR | 5-Port Real-time Redundant Ring Switch with 2-Fiber Port, Multi Mode, ST Type (RoHS) |
| RSM-405FC CR | 5-Port Real-time Redundant Ring Switch with 2-Fiber Port, Multi Mode, SC Type, metal case (RoHS) |
| RSM-405FCS CR | 5-Port Real-time Redundant Ring Switch with 2-Fiber Port, Single Mode, SC Type, metal case (RoHS) |
| RSM-405FT CR | 5-Port Real-time Redundant Ring Switch with 2-Fiber Port, Multi Mode, ST Type, metal case (RoHS) |
| RS-405AFC-T ~ Available soon ~ | 5-Port Real-time Redundant Ring Switch with 2-Fiber Port, Multi Mode, SC Type (+12 ~ +48 VDC) |
| RS-405AFCS-T ~ Available soon ~ | 5-Port Real-time Redundant Ring Switch with 2-Fiber Port, Single Mode, SC Type (+12 ~ +48 VDC) |
| RS-405AFT-T ~ Available soon ~ | 5-Port Real-time Redundant Ring Switch with 2-Fiber Port, Multi Mode, ST Type (+12 ~ +48 VDC) |
| RSM-405AFC-T ~ Available soon ~ | 5-Port Real-time Redundant Ring Switch with 2-Fiber Port, Multi Mode, SC Type, metal case (+12 ~ +48 VDC) |
| RSM-405AFCS-T ~ Available soon ~ | 5-Port Real-time Redundant Ring Switch with 2-Fiber Port, Single Mode, SC Type, metal case (+12 ~ +48 VDC) |
| RSM-405AFT-T ~ Available soon ~ | 5-Port Real-time Redundant Ring Switch with 2-Fiber Port, Multi Mode, ST Type, metal case (+12 ~ +48 VDC) |