Module Ethernet Modbus TCP 6 kênh DI + 6 kênh Relay 3onedata RIO1000-2T-6IO(DI)-6IO(RO)-TB-P(12~48VDC)
RIO1000 series is industrial I/O server specially designed for I/O devices to collect and control data, which can convert the collected I/O data into Modbus TCP protocol. This series supports 8 DI and 8 DO, 6 DI and 6 RO. It adopts DIN-Rail mounting to meet the requirements of different application scenes.
The I/O server supports a variety of network protocols, such as Modbus TCP, TCP, IP, UDP, TELNET, ARP, ICMP, HTTP, HTTPS, SNMP, SSH, SMTP, SNTP, DNS and DHCP protocols; It has perfect management functions and supports point-to-point configuration, access control, network diagnosis, rapid configuration, online upgrade, etc; Support DI, Counter, DO, Pulse Output and other working modes; Support Modbus TCP master (Client) device access; Support TELNET, WEB, SSH and other access methods. Network management system could bring you great user experience through its friendly interface design and easy and convenient operation.
RESET button can instantly restore factory defaults. Hardware adopts fanless, low power consumption, wide temperature and voltage design and has passed rigorous industrial standard tests, which can suit for the industrial scene environment with harsh requirements for EMC. It can be widely used in PLC control and management, Building Automation System, Health Care Automation System, measuring instrument and environmental forces monitoring system.
Features
- Support 2 10/100Base-T(X) self-adaptive Ethernet interfaces
- Support Modbus TCP protocol and can manage DI channel, DO channel and device system information through Modbus TCP Master
- Support customized Modbus TCP slave register address to facilitate the upgrading of industrial field system
- Support working modes such as DI, Counter, DO and Pulse Output
- Support network modes such as redundant mode, switching mode and dual IP mode to meet the needs of various network environments
- Support 12~48VDC power supply input
- Support -40~75℃ wide operating temperature range
Specifications
| Ethernet Port | Standard: 10Base-T, 100Base-TX
Protocol: Modbus TCP, TCP, IP, UDP, TELNET, ARP, ICMP, HTTP, HTTPS, SNMP, SSH, SMTP, SNTP, DNS and DHCP Rate: 10/100M Automatic Flow Control, MDI/MDI-X Autotunning Interface quantity: 2 Interface form: RJ45 Duplex mode: Full/Half Duplex Mode Self-adaption Network mode: single IP mode (redundant mode/switching mode) and dual IP mode Working mode: Modbus TCP Slave (Server), support function codes 01, 02, 03, 04, 05, 06, 15 and 16, and support up to 10 master connections Isolation protection: 1.5kVDC |
| DI
Digital Input |
Interface quantity: 6/8
Interface form:
20-PIN 3.81mm pitch terminal blocks (DI channel occupies 10 pins)
20-PIN 3.81mm pitch terminal blocks (DI channel occupies 8 pins)
Digital filtering: software configuration (1-65535ms) Counter frequency: ≤1kHz Working mode: DI or counter Input type: dry contact (ON: GND short circuit; OFF: open circuit); Wet contact Source (NPN) (ON: 0~3VDC; OFF: 10~30VDC); Wet contact Sink (PNP) (ON: 10~30VDC; OFF: 0~3VDC) |
| DO
Digital Output |
RIO1000-2T-8IO(DI)-8IO(DO)-TB-P(12~48VDC)
Interface quantity: 8 Interface form: 20-PIN 3.81mm pitch terminal blocks (DO channel occupies 10 pins) Pulse frequency: ≤ 500Hz Working mode: DO or pulse output Rated current: 200mA/Channel Output type: Sink (PNP) Overcurrent protection: 650mA/Channel Overvoltage protection: 45VDC |
| RO
Relay Output |
RIO1000-2T-6IO(DI)-6IO(RO)-TB-P(12~48VDC)
Interface quantity: 6 Interface form: 20-PIN 3.81mm pitch terminal blocks (RO channel occupies 12 pins) Rated load: resistive load, 5A 250VAC, 5A 30VDC Inductive load, 2A 250VAC, 2A 30VDC With standing Voltage: coil and contact, 3,000VAC 50/60Hz 1 min; Homopolar contact, 750VAC 50/60Hz 1 min Relay ON/OFF time: <10ms Insulation resistor:1000mΩ (Minimum) @500VDC Mechanical life: above 20,000,000 times Electrical Life: above 50,000 times (250VAC 5A, resistive load ) above 50,000 times (30VDC 5A, resistive load ) above 100,000 times (250VAC 2A, inductive load ) above 100,000 times (30VDC 3A, inductive load ) Contact resistance: <100mΩ |
| Management | WEB configuration (HTTP/HTTPS), TELNET configuration, SSHD configuration, point-to-point configuration |
| Security | Communication watchdog, SNMP management, mail alarm, SNMP Trap alarm, I/O Trap alarm, system alarm, user privilege classification, IP address filtering, MAC address filtering, remote access control |
| Indicator | Running indicator, power indicator, Ethernet indicator, I/O indicator |
| Power Supply | 12~48VDC, 3-PIN 5.08mm pitch terminal block, support non-polarity |
| Power Consumption | RIO1000-2T-8IO(DI)-8IO(DO)-TB-P(12~48VDC)
No-load: 1.5W@12VDC (high temperature) Full-load: 2.8W@12VDC (high temperature) RIO1000-2T-6IO(DI)-6IO(RO)-TB-P(12~48VDC) No-load: 1.4W@12VDC (high temperature) Full-load: 2.4W@12VDC (high temperature) |
| Working Environment | Operating temperature: -40~75℃
Storage temperature:-40~85℃ Relative humidity: 5%～95%(no condensation) |
| Physical Characteristic | Housing: IP40 protection, metal
Installation: DIN-Rail or wall mounting Dimension (W x H x D): 33mm×138mm×110mm Weight: 0.5kg |
| Industrial Standard | IEC 61000-4-2 (ESD, electrostatic discharge), Level 3B
IEC 61000-4-4 (EFT, electrical fast transient pulses), Level 3B
IEC 61000-4-5 (Surge), Level 3B
Shock: IEC 60068-2-27 Free fall: IEC 60068-2-32 Vibration: IEC 60068-2-6 |
| Authentication | CE, FCC, RoHS |
| Warranty | 3 years |
Ordering information
| Available Models | 100M Copper Port | DI Input | DO Output | RO Output | Power Supply |
| RIO1000-2T-8IO(DI)-8IO(DO)-TB-P(12~48VDC) | 2 | 8 | 8 | ― | 12~48VDC |
| RIO1000-2T-6IO(DI)-6IO(RO)-TB-P(12~48VDC) | 2 | 6 | ― | 6 | 12~48VDC |