Switch công nghiệp 8 cổng Ethernet + 1 cổng quang Multi-mode ST ICP DAS NSM-209FT
Features
- Provides 1 x 100-FX fiber port plus 8 x Ethernet ports
- Each port supports both 10/100 Mbps speed auto negotiation
- Full duplex IEEE 802.3x and half duplex backpressure flow control
- Automatic MDI/MDI-X crossover for plug-and-play
- Store-and-forward architecture
- Supports operating temperatures from -10 ~ +75 °C
Introduction
The NS-209F/NSM-209F is a 8-port unmanaged Ethernet with 1 fiber port switch. Using fiber optics, you can prevent noise from interfering with your system and supports high-speed (100 Mbps) and high-distance (up to 30 km) transmissions.
The NS-209F/NSM-209F provides a wide 12 to 48 VDC power range to fit all the common power standards found in industrial automation, without external power converters. The wide power input lowers installation and maintenance costs.
Specification
| Models | NS-209F Series | NSM-209F Series | |
| Technology | |||
| Standards | IEEE 802.3, 802.3u, 802.3x | ||
| Processing Type | Store & forward; wire speed switching | ||
| MAC Addresses | 2048 | ||
| Memory Bandwidth | 2 Gbps | ||
| Frame Buffer Memory | 512 Kbit | ||
| Flow Control | IEEE 802.3x flow control, back pressure flow control | ||
| Ethernet Interface | |||
| RJ-45 Ports | 10/100 Base-T(X) auto negotiation speed, F/H duplex mode, and auto MDI/MDI-X connection | ||
| LED Indicators | Power, Link/Act, 10/100M | ||
| Ethernet Isolation | 1500 Vrms 1 minute | ||
| Fiber Interface (100 Base-FX; SC/ST type) | |||
| Multi-Mode | NS-209FT/NS-209FC NSM-209FT/NSM-209FC |
Multi mode fiber cables: 50/125, 62.5/125 or 100/140 μm Distance: 2 km, (62.5/125 μm recommended) for full duplex Wavelength: 1300 or 1310nm Min. TX Output: -20 dBm Max. TX Output: -14 dBm Max. RX Sensitivity: -32 dBm |
|
| Single-Mode | NS-209FCS/NSM-209FCS | Single-mode fiber cables: 8.3/125, 8.7/125, 9/125 or 10/125 μm Distance: 30 km, (9/125 μm recommended) for full duplex Wavelength: 1300 or 1310nm Min. TX Output: -15 dBm Max. TX Output: -8 dBm Max. RX Sensitivity: -34 dBm |
|
| Power Input | |||
| Input Voltage Range | +12 ~ +48 VDC (Redundant input) | +12 ~ +48 VDC (Redundant input) One relay output with current carrying capacity of 1 A @ 30 VDC |
|
| Power Consumption | 0.26 A @ 24 VDC | ||
| Protection | Power reverse polarity protection | ||
| +/-4 kV ESD Protection | Yes | ||
| Connector | 5-Pin Removable Terminal Block | 7-Pin Removable Terminal Block | |
| Mechanical | |||
| Casing | Plastic (Flammability UL 94V-0) | Metal (IP20 Protection) | |
| Dimensions (W x L x H) | 64 mm x 101 mm x 118 mm | 73 mm x 105 mm x 132 mm | |
| Installation | DIN-Rail Mounting | DIN-Rail Mounting or Wall Mounting | |
| Environment | |||
| Operating Temperature | -10 ~ +75 °C | ||
| Storage Temperature | -20 °C ~ +85 °C | ||
| Ambient Relative Humidity | 10% ~ 90% RH, non-condensing | ||
Ordering information
| NS-209FT CR | Multi-mode, ST Connector, 8-port 10/100 Mbps with 1 fiber port Switch (RoHS) |
| NS-209FC CR | Multi-mode, SC Connector, 8-port 10/100 Mbps with 1 fiber port Switch (RoHS) |
| NS-209FCS CR | Single-mode 30 km, SC Connector, 8-port 10/100 Mbps with 1 fiber port Switch (RoHS) |
| NSM-209FT CR | Multi-mode, ST Connector, 8-port 10/100 Mbps with 1 fiber port Switch; metal case (RoHS) |
| NSM-209FC CR | Multi-mode, SC Connector, 8-port 10/100 Mbps with 1 fiber port Switch; metal case (RoHS) |
| NSM-209FCS CR | Single-mode 30 km, SC Connector, 8-port 10/100 Mbps with 1 fiber port Switch; metal case (RoHS) |
Accessories
| MDR-60-24 | 24V/2.5A, 60 W Power Supply with DIN-Rail Mounting |
| MDR-20-24 | 24 V/1 A, 24 W Power Supply with DIN-Rail Mounting |
| DIN-KA52F | 24 V/1.04 A, 25 W Power Supply |
