Switch công nghiệp 4 cổng Gigabit PoE Ethernet + 1 cổng combo Gigabit SFP ICP DAS NSM-205GP
Features
- Full Gigabit Ethernet ports
- 4 PoE/PoE+ PSE capable ports, fully compliant to IEEE 802.3af/at
- 24/48 VDC flexible redundant power inputs
- Supports 10 KB jumbo frames
- Pluggable SFP transceiver port
- Supports Auto Negotiation and Auto MDI/MDI-X
- Supports Dual +18 ~ 55 VDC power input and 1 relay output
- Supports operating temperatures from –40 ~ +75°C
- DIN-Rail Mounting, Wall Mounting (optional)
Introduction
The NSM-205GP is 5-port unmanaged full Gigabit Ethernet switch supporting Power-over-Ethernet on ports 1 to 4. The switch is classified as power source equipment (PSE), and when used in this way, the NSM-205GP switch enable centralization of the power supply, providing up to 30 watts. The NSM-205GP can be used to power IEEE 802.3af/at standard devices (PD).
Voltage boost technology supports 24V industrial power sources ensuring that a full and proper PSE voltage is available across all PoE ports.
Specification
| Technology | |
| Standards | IEEE 802.3 for 10Base-T IEEE 802.3u for 100Base-TX IEEE 802.3ab for 1000Base-T IEEE 802.3x for Flow Control IEEE 802.3af Power Over Ethernet IEEE 802.3at Power Over Ethernet Energy Efficient Ethernet (EEE) as per 802.3az; this provides power savings during idle network activity |
| Processing Type | Store & forward, wire speed switching |
| MAC Addresses | 8K |
| Memory Bandwidth | 10 Gbps |
| Frame buffer memory | 1 Mbit |
| Jumbo Frames | 10K for Speed 1000M |
| Flow Control | IEEE802.3x flow control, back pressure flow control |
| Interface | |
| RJ-45 Ports | 10/100/1000 BaseT(X), 10/100BaseT(X) auto negotiation speed, full/half duplex mode, and auto MDI/MDI-X connection |
| Fiber Port | 1000BaseSFP slot/100BaseSFP slot |
| LED Indicators | PWR1, PWR2, Power fail, 10/100M, 1000M, Link/Act, Power Device is detected |
| Ethernet Isolation | 1500 Vrms 1 minute |
| DIP Switch | 100BaseSFP/1000BaseSFP and PoE/PoE+ setting |
| Power Input | |
| Redundant Input Range | Flexible input +24/+48 VDC Nominal. ( +18 ~ +55 VDC) |
| Power Consumption | 0.13@ 48 VDC without PD loading; 3.1 A @ 48 VDC with PD full loading (30 W per ports) 0.25@ 24 VDC without PD loading; 6.2 A @ 24 VDC with PD full loading (30 W per ports) |
| Alarm Contact | One relay output with current carrying capacity of 1A @ 30 VDC |
| Protection | Power reverse polarity protection |
| Connector | 6-Pin Removable Terminal Block (Power & Relay) |
| Mechanical | |
| Chassis | Metal with an IP30 ingress protection rating |
| Dimensions (W x L x H) | 28 mm x 160 mm x 122 mm |
| Installation | DIN-Rail or Wall Mounting (with optional kit) |
| Environment | |
| Operating Temperature | -40 °C ~ + 75 °C ( -40° F to 167° F ) |
| Storage Temperature | -40 °C ~ + 85 °C (-40 F to 185° F) |
| Ambient Relative Humidity | 10 ~ 90% RH, non-condensing |
Ordering information
| NSM-205GP CR | 4G+1G Combo Port Gigabit Unmanaged Ethernet Switch with 4 IEEE 802.3af/at PoE+ ports (RoHS) |
