Switch công nghiệp 4 cổng Ethernet + 1 cổng quang Multi mode ST ICP DAS NSM-205FT
Features
- Provides 1 x 100-FX fiber port plus 4 x Ethernet ports
- Each port supports both 10/100 Mbps speed auto negotiation
- Full duplex IEEE 802.3x and half duplex backpressure flow control
- Automatic MDI/MDI-X crossover for plug-and-play
- Store-and-forward architecture
- Supports operating temperatures from 0 ~ +70 °C
Introduction
The NS-205F/NSM-205F is a 4-port unmanaged Ethernet with 1 fiber port switch. Using fiber optics, you can prevent noise from interfering with your system and supports high-speed (100 Mbps) and high-distance (up to 15 km) transmissions.
The NS-205F/NSM-205F provides a wide 10 to 30 VDC power range to fit all the common power standards found in industrial automation, without external power converters. The wide power input lowers installation and maintenance costs.
Compare Table
| Models | NS-205F | NSM-205F | NS-205AF | NSM-205AF |
| PoE | – | |||
| Input Voltage Rangeg | +10 ~ 30 VDC | +12 ~ 48 VDC | ||
| Operating Temperature | 0 °C ~ +70 °C | -30 °C ~ +75 °C | ||
| Casing | Plastic | Metal (IP20) | Plastic | Metal (IP30) |
| Installation | DIN-Rail Mounting | DIN-Rail Mounting or Wall Mounting | DIN-Rail Mounting | |
| Dimensions (W x H x D) (Unit: mm) |
64 x 118 x 101 | 73 x 121 x 105 | 31 x 157 x 113 | 25 x 168 x 119 |
Specification
| Models | NS-205F Series | NSM-205F Series | |
| Technology | |||
| Standards | IEEE 802.3, 802.3u, 802.3x | ||
| Processing Type | Store & forward; wire speed switching | ||
| MAC Addresses | 1024 | ||
| Memory Bandwidth | 3.2 Gbps | ||
| Frame Buffer Memory | 512 Kbit | ||
| Flow Control | IEEE 802.3x flow control, back pressure flow control | ||
| Ethernet Interface | |||
| RJ-45 Ports | 10/100 Base-T(X) auto negotiation speed, F/H duplex mode, and auto MDI/MDI-X connection | ||
| LED Indicators | Power, Link/Act, 10/100M | ||
| Ethernet Isolation | 1500 Vrms 1 minute | ||
| Fiber Interface (100 Base-FX; SC/ST type) | |||
| Multi-Mode | NS-205FT/NS-205FC NSM-205FT/NSM-205FC |
Multi mode fiber cables: 50/125, 62.5/125 or 100/140 μm Distance: 2 km, (62.5/125 μm recommended) for full duplex Wavelength: 1300 or 1310nm Min. TX Output: -20 dBm Max. TX Output: -14 dBm Max. RX Sensitivity: -34 dBm |
|
| Single-Mode | NS-205FCS/NSM-205FCS | Single-mode fiber cables: 8.3/125, 8.7/125, 9/125 or 10/125 μm Distance: 15 km, (9/125 μm recommended) for full duplex Wavelength: 1300 or 1310nm Min. TX Output: -15 dBm Max. TX Output: -8 dBm Max. RX Sensitivity: -36 dBm |
|
| Power Input | |||
| Input Voltage Range | +10 ~ +30 VDC (Redundant input) | +10 ~ +30 VDC (Redundant input) One relay output with current carrying capacity of 2A @ 30 VDC |
|
| Power Consumption | 0.14 A @ 24 VDC | ||
| Protection | Power reverse polarity protection | ||
| +/-4 kV ESD Protection | Yes | ||
| Connector | 5-Pin Removable Terminal Block | 7-Pin Removable Terminal Block | |
| Mechanical | |||
| Casing | Plastic (Flammability UL 94V-0) | Metal (IP20 Protection) | |
| Dimensions (W x L x H) | 64 mm x 98 mm x 110 mm | 73 mm x 110 mm x 102 mm | |
| Installation | DIN-Rail Mounting | DIN-Rail Mounting or Wall Mounting | |
| Environment | |||
| Operating Temperature | 0 °C ~ +70 °C | ||
| Storage Temperature | -20 °C ~ +85 °C | ||
| Ambient Relative Humidity | 10% ~ 90% RH, non-condensing | ||
Ordering information
| NS-205FT CR | Multi-mode, ST Connector, 4-port 10/100 Mbps with 1 fiber port Switch (RoHS) |
| NS-205FC CR | Multi-mode, SC Connector, 4-port 10/100 Mbps with 1 fiber port Switch (RoHS) |
| NS-205FCS CR | Single-mode 15 km, SC Connector, 4-port 10/100 Mbps with 1 fiber port Switch (RoHS) |
| NSM-205FT CR | Multi-mode, ST Connector, 4-port 10/100 Mbps with 1 fiber port Switch; metal case (RoHS) |
| NSM-205FC CR | Multi-mode, SC Connector, 4-port 10/100 Mbps with 1 fiber port Switch; metal case (RoHS) |
| NSM-205FCS CR | Single-mode 15 km, SC Connector, 4-port 10/100 Mbps with 1 fiber port Switch; metal case (RoHS) |
Accessories
| MDR-60-24 | 24V/2.5A, 60 W Power Supply with DIN-Rail Mounting |
| MDR-20-24 | 24 V/1 A, 24 W Power Supply with DIN-Rail Mounting |
| DIN-KA52F | 24 V/1.04 A, 25 W Power Supply |
