Bộ chuyển đổi quang điện công nghiệp 1 cổng Gigabit Ethernet + 1 cổng Gigabit quang Multi mode 550m SC ICP DAS NSM-200SX
Features
- Provides 1 x 1000 Mbps fiber port with SC type connector for 1000 Base-SX/LX device
- Supports wide operating temperatures from -30 °C ~ +75 °C
- Transparent to jumbo packets up to 10 KB
- Provides Link Fault Pass-through (LFP)
- Supports redundant +12 VDC ~ +48 VDC power input
Introduction
ICP DAS’s line of feature rich 10/100/1000 SFP Media Converters transparently connects copper to SFP for multimode or single mode fiber. Our 10/100/1000 Ethernet to Fiber Converters provide an economical path to extend the distance of an existing network, the life of non-fiber based equipment, or the distance between two devices. The pluggable fiber optics port allows for flexible network configurations using SFP transceivers supplied by ICP DAS or other manufacturers of MSA (Multi-source Agreement) compliant SFPs.
Gigabit Media Converters are also available with support for LFP (Link Fault Pass-through) feature
Specification
| Models | NSM-200SX | NSM-200SX2 | NSM-200LX | NSM-200G-SFP |
| Interface | ||||
| RJ-45 Ports | 10/100/1000 Base-T(X) auto negotiation speed and auto MDI/MDI-X connection | |||
| Fiber Port | Multi-mode: Up to 2 Km; Single-mode: Up to 10 km | 1000BaseSFP slot/100BaseSFP slot | ||
| LED Indicators | PWR1, PWR2, P-Fail, Link/Act, 100M, 1000M | |||
| Optical Fiber | 50/125 μm (Multi-mode) | 50/125 μm (Multi-mode) | 10/125 μm (Signal Mode) | – |
| Distance | 0.55 km | 2 km | 10 km | – |
| Wavelength | 850 nm | 1310 nm | 1310 nm | – |
| Min. TX Output | -9.5 dBm | -9 dBm | -9.4 dBm | – |
| Max. TX Output | -4 dBm | -1 dBm | -3 dBm | – |
| Max. RX Sensitivity | -17 dBm | -19 dBm | -20 dBm | – |
| Min. RX Overload | -3 dBm | -1 dBm | -3 dBm | – |
| Power | ||||
| Input Voltage Range | +12 VDC ~ +48 VDC (Non-isolated) | |||
| Power Consumption | 0.1 A @ 24 VDC | |||
| Mechanical | ||||
| Dimensions (W x L x H) | 34 mm x 111 mm x 121 mm | |||
| Installation | DIN-Rail Mounting (optional wall mounting kits) | |||
| Environment | ||||
| Operating Temperature | -30 °C ~ +75 °C | |||
| Storage Temperature | -40 °C ~ +85 °C | |||
| Ambient Relative Humidity | 10% ~ 90% RH, non-condensing | |||
Ordering information
| NSM-200G-SFP CR | Industrial 1000 Base-T to 1000 Base-X Converter, SFP slot (RoHS) |
| NSM-200SX CR | Industrial 1000 Base-T to 1000 Base-SX Fiber Converter, Multi-mode 850 nm, 0.55 km, SC connector (RoHS) |
| NSM-200SX2 CR | Industrial 1000 Base-T to 1000 Base-SX Fiber Converter, Multi-mode 1310 nm, 2 km, SC connector (RoHS) |
| NSM-200LX CR | Industrial 1000 Base-T to 1000 Base-LX Fiber Converter, Single-mode 1310 nm, 10 km, SC connector (RoHS) |
Accessories
| GPSU06U-6 | 24 V/0.25 A, 6 W Power Supply |
| MDR-20-24 | 24 V/1 A, 24 W Single Output Industrial DIN Rail Power Supply |
| SFP-1G85M-SX | Multi-mode 850 nm, 0.5 km SFP module |
![]() |
| SFP-1G13M-SX2 | Multi-mode 1310 nm, 2 km SFP module | |
| SFP-1G13S-LX | Single-mode 1310 nm, 10 km SFP module | |
| SFP-1G13S-LX20 | Single-mode 1310 nm, 20 km SFP module | |
| SFP-1G13S-LHX | Single-mode 1310 nm, 40 km SFP module | |
| SFP-1G15S-XD | Single-mode 1550 nm, 60 km SFP module |

