Switch công nghiệp 4 cổng PoE Ethernet + 4 cổng Ethernet ICP DAS NS-208PSE-4
Features
- Each port supports both 10/100 Mbps speed auto negotiation
- Full duplex IEEE 802.3x and half duplex backpressure flow control
- Auto-detection of PD (powered devices) and automatic power management
- Over-temperature, over-current and over/under-voltage detection
- Supports operating temperatures from -40 °C ~ +75 °C
- Automatic MDI/MDI-X crossover for plug-and-play
- Store-and-forward architecture
- 8 PoE ports for NS-208PSE/NSM-208PSE;
4 PoE ports for NS-208PSE-4/NSM-208PSE-4 - Supports +46 ~ +55 VDC power input
- DIN-Rail Mounting
Introduction
The NS-208PSE/NS-208PSE-4 is an 8-port unmanaged PoE (Power over Ethernet) Industrial Ethernet switch, it supports 8/4 PoE ports which are classified as power source equipments (PSE). The NS-208PSE/NS-208PSE-4 makes centralized power supply come true and provides up to 15.4 W of power per port. The NS-208PSE/NS-208PSE-4 can be used to power IEEE802.3af compliant powered devices (PD) by Ethernet cable and eliminates the need for additional power wiring.
The NS-208PSE/NSM-208PSE is exactly the same as the NS-208PSE-4/NSM-208PSE-4, except for the PoE ports.
Specification
| Models | NS-208PSE | NSM-208PSE | NS-208PSE-4 | NSM-208PSE-4 |
| Technology | ||||
| Standards | IEEE 802.3, 802.3u, 802.3x ,802.3af (Power over Ethernet) | |||
| Processing Type | Store & forward; wire speed switching | |||
| MAC Addresses | 1024 | |||
| Memory Bandwidth | 3.2 Gbps | |||
| Frame Buffer Memory | 512 Kbit | |||
| Flow Control | IEEE 802.3x flow control, back pressure flow control | |||
| Interface | ||||
| RJ-45 Ports | 10/100 Base-T(X) auto negotiation speed, F/H duplex mode, and auto MDI/MDI-X connection | |||
| LED Indicators | Power, Link/Act, Power Device is detected | |||
| Ethernet Isolation | 1500 Vrms 1 minute | |||
| EMS Protection | Yes | |||
| Power Input | ||||
| Input Voltage Range | +46 ~ +55 VDC for PoE output | |||
| Power Consumption | 0.1 A @ 48 VDC without PD loading 2.8 A @ 48 VDC with PD full loading |
0.09 A @ 48 VDC without PD loading 1.45 A @ 48 VDC with PD full loading |
||
| Protection | Power reverse polarity protection | |||
| EMS Protection | Yes | |||
| Connection | 3-Pin Removable Terminal Block | |||
| PoE Technology | ||||
| PoE Compliance | 100% IEEE 802.3af compliant | |||
| PoE Classification | PSE (Power Sourcing Equipment) | |||
| PoE Voltage | +46 ~ +55 VDC depending on power input | |||
| PoE Power | Up to 15.4 watts per channel | |||
| PoE Operation | Automatic detection and power management | |||
| PoE Pin Assignments | V+ (Pin 1, 2), V- (Pin 3, 6) | |||
| PoE Disconnect Mode | DC disconnect | |||
| Mechanical | ||||
| Casing | Plastic (Flammability UL 94V-0) | Metal (IP30 Protection) | Plastic (Flammability UL 94V-0) | Metal (IP30 Protection) |
| Dimensions (W x L x H) | 31 mm x 157 mm x 113 mm | 25 mm x 168 mm x 119 mm | 31 mm x 157 mm x 113 mm | 25 mm x 168 mm x 119 mm |
| Installation | DIN-Rail Mounting | |||
| Environment | ||||
| Operating Temperature | -40 °C ~ +75 °C | |||
| Storage Temperature | -40 °C ~ +85 °C | |||
| Ambient Relative Humidity | 10% ~ 90% RH, non-condensing | |||
Ordering information
| NS-208PSE CR | 8-port Industrial 10/100 Mbps Ethernet with 8-PoE (PSE) Switch (RoHS) |
| NS-208PSE-4 CR | 8-port Industrial 10/100 Mbps Ethernet with 4-PoE (PSE) Switch (RoHS) |
| NSM-208PSE CR | 8-port Industrial 10/100 Mbps Ethernet with 8-PoE (PSE) Switch; Metal Casing (RoHS) |
| NSM-208PSE-4 CR | 8-port Industrial 10/100 Mbps Ethernet with 4-PoE (PSE) Switch; Metal Casing (RoHS) |
