Switch công nghiệp 4 cổng Ethernet + 2 cổng quang Multi-mode ST ICP DAS NS-206AFT-T
Features
- Provides 2 x 100-FX fiber ports plus 4 x Ethernet ports
- Each port supports both 10/100 Mbps speed auto negotiation
- Full duplex IEEE 802.3x and half duplex backpressure flow control
- Automatic MDI/MDI-X crossover for plug-and-play
- Store-and-forward architecture
- Redundant dual +12 ~ 48 VDC power inputs
- Supports operating temperatures from -30 ~ +75 °C
- DIN-Rail Mounting
Introduction
The NS-206AF/NSM-206AF is a 4-port unmanaged Ethernet with 2 fiber port switch. Using fiber optics, you can prevent noise from interfering with your system and supports high-speed (100 Mbps) and high-distance (up to 60 km) transmissions.
The NS-206AF/NSM-206AF provides a wide 12 to 48 VDC power range to fit all the common power standards found in industrial automation, without external power converters. The wide power input lowers installation and maintenance costs.
Comparison Table
| Models | NS-206F | NSM-206F | NS-206AF | NSM-206AF |
| PoE | – | |||
| Input Voltage Rangeg | +10 ~ 30 VDC | +12 ~ 48 VDC | ||
| Operating Temperature | 0 °C ~ +70 °C | -30 °C ~ +75 °C | ||
| Casing | Plastic | Metal (IP20) | Plastic | Metal (IP30) |
| Installation | DIN-Rail Mounting | DIN-Rail Mounting or Wall Mounting | DIN-Rail Mounting | |
| Dimensions (W x H x D) (Unit: mm) |
64 x 110 x 98 | 72.5 x 110 x 102 | 31 x 157 x 113 | 25 x 168 x 119 |
Specification
| Models | NS-206AF Series | NSM-206AF Series | |
| Technology | |||
| Standards | IEEE 802.3, 802.3u, 802.3x | ||
| Processing Type | Store & forward; wire speed switching | ||
| MAC Addresses | 1024 | ||
| Memory Bandwidth | 2.0 Gbps | ||
| Frame Buffer Memory | 512 Kbit | ||
| Flow Control | IEEE 802.3x flow control, back pressure flow control | ||
| Ethernet Interface | |||
| RJ-45 Ports | 10/100 Base-T(X) auto negotiation speed, F/H duplex mode, and auto MDI/MDI-X connection | ||
| LED Indicators | Power, Link/Act, 10/100M | ||
| Ethernet Isolation | 1500 Vrms 1 minute | ||
| +/-4 kV ESD Protection | Yes | ||
| Fiber Interface (100 Base-FX; SC/ST type) | |||
| Multi-Mode | NS-206AFT-T/FC-T NSM-206AFT-T/FC-T |
Multi mode fiber cables: 50/125, 62.5/125 or 100/140 μm Distance: 2 km, (62.5/125 μm recommended) for full duplex Wavelength: 1300 or 1310nm Min. TX Output: -20 dBm Max. TX Output: -14 dBm Max. RX Sensitivity: -32 dBm Min. RX Overload: -8 dBm Budget: 12 dBm |
|
| Single-Mode | NS-206AFCS-T NSM-206AFCS-T |
Single-mode fiber cables: 8.3/125, 8.7/125, 9/125 or 10/125 μm Distance: 30 km, (9/125 μm recommended) for full duplex Wavelength: 1300 or 1310nm Min. TX Output: -15 dBm Max. TX Output: -8 dBm Max. RX Sensitivity: -34 dBm Min. RX Overload: -5 dBm Budget: 19 dBm |
|
| Single-Mode | NS-206AFCS-60T NSM-206AFCS-60T |
Single-mode fiber cables: 8.3/125, 8.7/125, 9/125 or 10/125 μm Distance: 60 km, (9/125 μm recommended) for full duplex Wavelength: 1300 or 1310nm Min. TX Output: -5 dBm Max. TX Output: 0 dBm Max. RX Sensitivity: -35 dBm Min. RX Overload: -5 dBm Budget: 30 dBm |
|
| Power Input | |||
| Input Voltage Range | +12 ~ +48 VDC (Redundant input) | ||
| Power Consumption | 0.14 A @ 24 VDC | ||
| Protection | Power reverse polarity protection | ||
| +/-4 kV ESD Protection | Yes | ||
| Connection | 6-Pin Removable Terminal Block | ||
| Mechanical | |||
| Casing | Plastic (Flammability UL 94V-0) | Metal (IP30 Protection) | |
| Dimensions (W x L x H) | 31 mm x 157 mm x 113 mm | 25 mm x 168 mm x 119 mm | |
| Installation | DIN-Rail Mounting | ||
| Environment | |||
| Operating Temperature | -30 °C ~ +75 °C | ||
| Storage Temperature | -40 °C ~ +85 °C | ||
| Ambient Relative Humidity | 10% ~ 90% RH, non-condensing | ||
Ordering information
| NS-206AFT-T CR | Multi-mode, ST Connector, 4-port 10/100 Mbps with 2 Fiber ports Switch (RoHS) |
| NS-206AFC-T CR | Multi-mode, SC Connector, 4-port 10/100 Mbps with 2 Fiber ports Switch (RoHS) |
| NS-206AFCS-T CR | Single-mode 30 km, SC Connector, 4-port 10/100 Mbps with 2 Fiber ports Switch (RoHS) |
| NS-206AFCS-60T CR | Single-mode 60 km, SC Connector, 4-port 10/100 Mbps with 2 Fiber ports Switch (RoHS) |
| NSM-206AFT-T CR | Multi-mode, ST Connector, 4-port 10/100 Mbps with 2 Fiber ports Switch; metal case (RoHS) |
| NSM-206AFC-T CR | Multi-mode, SC Connector, 4-port 10/100 Mbps with 2 Fiber ports Switch; metal case (RoHS) |
| NSM-206AFCS-T CR | Single-mode 30 km, SC Connector, 4-port 10/100 Mbps with 2 Fiber ports Switch; metal case (RoHS) |
| NSM-206AFCS-60T CR | Single-mode 60 km, SC Connector, 4-port 10/100 Mbps with 2 Fiber ports Switch; metal case (RoHS) |
Accessories
| MDR-60-24 | 24V/2.5A, 60 W Power Supply with DIN-Rail Mounting |
| MDR-20-24 | 24 V/1 A, 24 W Power Supply with DIN-Rail Mounting |
| DIN-KA52F | 24 V/1.04 A, 25 W Power Supply |
