Bộ chuyển đổi quang điện công nghiệp 1 cổng Ethernet + 1 cổng quang Multi Mode SC ICP DAS NS-200FC
Features
- Automatic MDI / MDI-X crossover for plug-and-play
- Each port supports both 10/100 Mbps speed auto negotiation
- Store-and-forward architecture
- Full duplex IEEE 802.3x and half duplex backpressure flow control
- Supports +10 ~ +30 VDC voltage
- Supports operating temperatures from 0 °C ~ +70 °C
- DIN-Rail mount for industrial usage
Introduction
The NS-200F series is an Ethernet (10/100Base-TX) to Fiber Optic (100Base-FX) converter. The Ethernet supports 10/100M auto-negotiation feature and auto MDI/MDIX function.
The NS-200F series operates at either half or full duplex mode.
It contains “soft start” function with overload protection, high-low voltage protection. The width of the NS-200F series is just 32.30 mm, so it can be used where space is important.
Specification
| Technology | |
| Standards | IEEE802.3, 802.3u, 802.3x |
| Processing Type | Store & forward wire speed switching |
| MAC Addresses | 1024 |
| Memory Bandwidth | 1.4 Gbps |
| Interface | |
| RJ-45 Ports | 10/100BaseT(X) auto negotiation speed, F/H duplex mode, and auto MDI/MDIX connection |
| Fiber Port | 100 Base-FX |
| LED Indicators | 10/100M, Link/Act, Full duplex/Half duplex(Fiber Port) |
| Ethernet Isolation | 1500 Vrms 1 minute |
| Multi Mode | Multi mode fiber cables:50/125, 62.5/125 or 100/140 μm |
| Distance :2 km, (62.5/125 μ mrecommended) for full duplex | |
| Wavelength : 1300 or 1310nm | |
| Min. TX Output:- 20 dBm | |
| Max. TX Output: -14 dBm | |
| RX Sensitivity: -34 to -31 dBm | |
| Single Mode | Single-mode fiber cables: 8.3/125, 8.7/125, 9/125 or 10/125μm |
| Distance: 15 km, (9/125 μm recommended) for full duplex | |
| Wavelength: 1300 or 1310nm | |
| Min. TX Output: – 15 dBm | |
| Max. TX Output: -8 dBm | |
| RX Sensitivity: -36 to -31 dBm | |
| Ethernet Transmission distance | Ethernet : 2-pair UTP/STP Cat.3,4,5, EIA/TIA-568 100-ohm |
| Fast Ethernet : 2-pair UTP/STP Cat. 5, EIA/TIA-568 100-ohm | |
| Power | |
| Input Voltage Range | +10 ~ +30 VDC (Non-isolation) |
| Power Consumption | 0.12 A@24 VDC, +/- 5% arrowed with 100M Full duplex |
| LED Indicator | Yes |
| Protection | Power reverse polarity protection |
| Frame Ground for EMS Protection | Yes |
| Mechanical | |
| Casing | Plastic (Flammability UL 94V-0) |
| Dimensions (W x L x H) | 33 mm x 85 mm x 107 mm |
| Installation | DIN-Rail |
| Environment | |
| Operating Temperature | 0 °C ~ +70 °C |
| Storage Temperature | -20 °C ~ +85 °C |
| Ambient Relative Humidity | 10% ~ 90% RH, non-condensing |
Ordering information
| NS-200FC CR | Industrial 10/100 Base-T to 100 Base-FX Media Converter; 1 multi mode, SC connector (RoHS) |
| NS-200FT CR | Industrial 10/100 Base-T to 100 Base-FX Media Converter; 1 multi mode, ST connector (RoHS) |
| NS-200FCS CR | Industrial 10/100 Base-T to 100 Base-FX Media Converter; 1 single mode, SC connector (RoHS) |