Module RS-485 DCON & Modbus 7 kênh đầu ra Photo-Mos Relay ICP DAS M-7066PD
Features
- I-7066(D)
- PhotoMOS Relay:0.13 A @ 350 V (AC peck or DC)
- M-7066P(D)
- PhotoMOS Relay:1 A @ 80 V (AC peck or DC)
- 7 PhotoMOS Relay Outputs
- 4 kV ESD Protection
- No Arcing, No Bounce, and No Switching Noise
- Photocouple Isolation
- Built-in Dual Watchdog
- Configurable Power-on Value Settings
- Configurable Safe Value Settings
- Wide Operating Temperature Range: -25 ~ +75°C
Introduction
Both the I-7066 and the M-7066P feature seven Form A PhotoMOS relay output channels. In comparison to electromechanical relays, the PhotoMOS relays provide a faster response time, greater electrical endurance, higher vibration and shock resistance. There are also no arcing, no bounce, and no switching noise for the PhotoMOS relay. There are options for configuring power-on and safe digital output values, and both the I-7066D and the M-7066PD each include seven LED indicators that are used to display channel status as well as providing 4 kV ESD protection.
Application
- Building Automation
- Factory Automation
- Machine Automation
- Remote Maintenance
- Remote Diagnosis
- Testing Equipment
System Specification
| Models | I-7066 | I-7066D | M-7066P | M-7066PD |
| Communication | ||||
| Interface | RS-485 | |||
| Format | (N, 8, 1) (N, 8, 2) (E, 8, 1) (O, 8, 1) | |||
| Baud Rate | 1200 ~ 115200 bps | |||
| Protocol | DCON | DCON, Modbus RTU | ||
| Dual Watchdog | Yes, Module (1.6 Seconds), Communication (Programmable) | |||
| LED Indicator/Display | ||||
| System LED Indicator | Yes, 1 LED as Power/Communication Indicator | |||
| I/O LED Indicator | – | Yes, 7 LEDs as Relay Output Indicators |
– | Yes, 7 LEDs as Relay Output Indicators |
| 7-Segment LED Display | – | |||
| Isolation | ||||
| Intra-Module Isolation, Field-to-Logic | 5000 VDC | 2000 VDC | ||
| EMS Protection | ||||
| ESD (IEC 61000-4-2) | ±4 kV Contact for each Terminal | |||
| ±8 kV Air for Random Line | ||||
| EFT (IEC 61000-4-4) | ±4 kV for 8 Relay and Power Line | |||
| ±2 kV for RS-485 Port Line | ||||
| Surge (IEC 61000-4-5) | – | |||
| Power | ||||
| Reverse Polarity Protection | Yes | |||
| Input Voltage Range | 10 ~ 30 VDC | |||
| Consumption | 0.4 W | 0.8 W | 0.5 W | 0.9 W |
| Mechanical | ||||
| Dimensions (W x L x H) | 72 mm x 123 mm x 35 mm | |||
| Installation | DIN-Rail or Wall Mounting | |||
| Environment | ||||
| Operating Temperature | -25 ~ +75°C | |||
| Storage Temperature | -40 ~ +85 °C | |||
| Humidity | 10 ~ 95% RH, Non-condensing | |||
I/O Specification
| Models | I-7066 | I-7066D | M-7066P | M-7066PD | |
| Relay Output | |||||
| Channels | 7 | ||||
| Relay Type | PhotoMOS Relay (Form A) | ||||
| Form A PhotoMOS |
Operating Load Voltage Range | 350 V (AC peck or DC) | 80 V (AC peck or DC) | ||
| Continuous Load Current | 0.13 A | 1 A | |||
| Peak Load Current | 0.4 A | 3 A | |||
| Output Off State Leakage Current | 1 uA | ||||
| Operate Time | 2 ms (Max.) | 5 ms (Max.) | |||
| Release Time | 1 ms (Max.) | 0.2 ms (Max.) | |||
| Electrical Endurance | Long Life, And No Arcing, No Bounce, And No Switching Noise | ||||
| Power-on Value | Yes, Programmable | ||||
| Safe Value | Yes, Programmable | ||||
Ordering information
| I-7066 CR | 7-channel Photo-Mos Relay Output Module with DCON Protocol (Blue Cover) (RoHS) |
| I-7066D CR | I-7066 with LED Display (Blue Cover) (RoHS) |
| M-7066P-G CR | 7-channel PhotoMOS Relay Output Module with DCON and Modbus Protocols (Gray Cover) (RoHS) |
| M-7066PD-G CR | M-7066P with LED Display (Gray Cover) (RoHS) |