Module RS-485 DCON & Modbus 16 kênh đầu ra số (DO) ICP DAS M-7043D
Features
- I-7042/I-7042D
- 13-channel Open Collector Output
- 3750 Vrms Intra-module Isolation
- I-7043/I-7043D/M-7043/M-7043D
- 16-channel Open Collector Output
- Non-isolated for all channels
- Sink-type Digital Outputs
- Configurable Power-on Value Settings
- Configurable Safe Value Settings
- Dual Watchdog
- Wide Operating Temperature Range: -25 to +75°C
Introduction
The I-7042 offers 13 channels digital output channels, each of which features Photocouple isolation and supports sink-type output using an open collector. There are also options to enable both power-on and safe values. The I-7042D has 13 LED indicators that can be used to monitor the status of DO channels. 3750 Vrms intra-module isolation is standard.
The I-7043 offers 16 digital output channels, each of which are non-isolated and support sink-type output using an open collector. There are also options to enable both power-on and safe values. The I-7043D has 16 LED indicators that can be used to monitor the status of DO channels. The hardware specifications for the M-7043 are the same as the I-7043, and both support the Modbus RTU and DCON protocols, which can be configured via software.
System Specification
Models | I-7042 | I-7043 | M-7043 |
I-7042D | I-7043D | M-7043D | |
Communication | |||
Interface | RS-485 | ||
Bias Resistor | No (Usually supplied by the RS-485 Master. Alternatively, add a tM-SG4 or SG-785.) | ||
Format | (N, 8, 1) (N, 8, 2) (E, 8, 1) (O, 8, 1) | ||
Baud Rate | 1200 to 115200 bps | ||
Protocol | DCON | Modbus RTU, DCON | |
Dual Watchdog | Yes, Module (1.6 Seconds), Communication (Programmable) | ||
LED Indicator/Display | |||
System LED Indicator | Yes, 1 LED as Power/Communication Indicator | ||
I/O LED Indicator | – | – | – |
Yes, 13 LEDs as Digital Output Indicators | Yes, 16 LEDs as Digital Output Indicators | Yes, 16 LED as Digital Output Indicator | |
7-Segment LED Display | – | ||
Isolation | |||
Intra-Module Isolation, Field-to-Logic | 3750 Vrms | – | |
EMS Protection | |||
ESD (IEC 61000-4-2) | ±2 kV Contact for each Terminal | – | |
±4 kV Air for Random Point | – | ||
EFT (IEC 61000-4-4) | ±2 kV for Power Line | – | |
Surge (IEC 61000-4-5) | – | ||
Power | |||
Reverse Polarity Protection | Yes | ||
Input Range | 10 ~ 30 VDC | ||
Consumption | 1.0 W | 0.4 W | 0.4 W |
1.7 W | 1.1 W | 1.1 W | |
Mechanical | |||
Dimensions (L x W x H) | 123 mm x 72 mm x 35 mm | ||
Installation | DIN-Rail or Wall Mounting | ||
Environment | |||
Operating Temperature | -25 to +75°C | ||
Storage Temperature | -40 to +85°C | ||
Humidity | 10 to 95% RH, Non-condensing |
I/O Specification
Models | I-7042 | I-7043 | M-7043 |
I-7042D | I-7043D | M-7043D | |
Digital Output | |||
Channels | 13 | 16 | |
Type | Open Collector | ||
Sink/Source (NPN/PNP) | Sink | ||
Load Voltage | +3.5 ~ 30 VDC | +10 ~ 30 VDC | |
Max. Load Current | 100 mA/Channel | ||
Overvoltage Protection | – | ||
Overload Protection | – | ||
Power-on Value | Yes | ||
Safe Value | Yes |
Ordering information
I-7042 CR | 13-channel Isolated Digital Output Module using the DCON Protocol (Blue Cover) (RoHS) |
I-7042D CR | I-7042 with LED Display (Blue Cover) (RoHS) |
I-7043 CR | 16-channel Non-isolated Digital Output Module using the DCON Protocol (Blue Cover) (RoHS) |
I-7043D CR | I-7043 with LED Display (Blue Cover) (RoHS) |
I-7043D-G CR | I-7043 with LED Display (Gray Cover) (RoHS) |
M-7043-G CR | 16-channel Non-isolated Digital Output Module using the DCON and Modbus Protocol (Gray Cover) (RoHS) |
M-7043D-G CR | M-7043-G with LED Display (Gray Cover) (RoHS) |