Bộ thu phát Wi-Fi công nghiệp 3Onedata IAP2312N-2T
Features
1. Support 1-way 10/100Base-T(X) LAN port and 1-way 10/100Base-T(X) WAN port
2. Support two power supply modes, 12~48VDC terminal blocks power supply and POE 48VDC power supply
3. Support route, AP, Bridge, client four work modes
4. Support multiple AP seamless roaming technology
5. Support -40~75℃ wide operating temperature range .
Introduction
IAP2312N-2T is an industrial wireless AP, it supports route, AP, bridge, client four working modes and IEEE802.11b/g/n wireless technology, and wireless transmission speed reaches 300Mbps, which can meet fast data transmission demands. The device supports WEP SHARED, WPA2-PSK and other wireless cipher mode; it possesses SSID concealing, wireless user isolation, MAC address filtering, ARP binding, DMZ setting and other security strategies. Supports virtual AP, that is, an AP device supports multiple SSID; supports seamless roaming, that is, in the WLAN (Wireless Local Area Network) constituted by multiple AP, user can achieve seamless roaming without conducting the switching operation. The product adopts fanless, low power consumption, industrial grade design, all components adopt industrial grade components, which can achieve high reliability and adapt to harsh industrial environment. The -40~75℃ working temperature range can meet various industrial demands.
Features and Benefits
Support IEEE802.3, IEEE802.3u, IEEE802.11b/g/n, IEEE802.11i, IEEE802.11r standard
Support 1-way 10/100Base-T(X) LAN port and 1-way 10/100Base-T(X) WAN port
Support two power supply modes, 12~48VDC terminal blocks power supply and POE 48VDC power supply
Support 2 x 2 MIMO technology, it provides 1.5KV isolation protection for antenna and power supply
Support route, AP, Bridge, client four work modes
Support multiple AP seamless roaming technology
Support multiple SSID setting and provides SSID concealing function
Support port forwarding, ARP binding, DMZ isolation area and other firewall functions
Support wireless user management
Support wide temperature range operation and storage, working temperature -40~75℃, storage temperature -40~85℃
IP40 protection grade, DIN-rail mounting
Specification
Standard
&Protocol |
Standard: IEEE802.3, IEEE802.3u, IEEE802.11b/g/n, IEEE802.11i, IEEE802.11r, IEEE802.3af/at Protocol: TCP/IP, DHCP, PPPOE, ICMP, ARP, HTTP
|
Wireless Transmission Speed |
802.11n: 6.5~300Mbps 802.11b: 11/5.5/2/1Mbps 802.11g: 54/48/36/24/18/12/9/6Mbps
|
Radio Frequency |
Channel: 2.412GHz~2.4835GHz RF power output: 20dBm Receiving sensitivity: 802.11n_HT40: -82dBm@MCS0, -64dBm@MCS7 802.11n_HT20: -85dBm@MCS0, -67dBm@MCS7 802.11g: -91dBm@6Mbps, -72dBm@54Mbps 802.11b: -93dBm@1Mbps, -87dBm@11Mbps Transmitted power: 802.11n_HT40: 20dBm@MCS0, 20dBm@MCS7 802.11n_HT20: 20dBm@MCS0, 20dBm@MCS7 802.11g: 20dBm@6Mbps, 20dBm@54Mbps 802.11b: 20dBm@1Mbps, 20dBm@11Mbps Modulation system: DBPSK, DQPSK, CCK, OFDM, 16-QAM, 64-QAM
|
Interface |
LAN port: 1-way 10/100Base-T(X) RJ45 port WAN port: 1-way 10/100Base-T(X) RJ45 port, supports POE48VDC power supply input Antenna: 2 RP-SMA (Female) interfaces
|
Transfer distance
|
Twisted cable: 100M (standard CAT5/CAT5e cable)
|
LED Indicator |
Device running status indicator: RUN Power supply connection status indicator: PI POE power supply status indicator: PoE Alarm indicator: ALM Wireless port connection indicator: Wireless signal intensity indicator: LAN port connection status indicator: LAN WAN port connection status indicator: WAN
|
Power
Requirement |
Power supply input: 12~48VDC or 48VDC POE power supply Input mode: 3-pin 5.08mm pitch terminal block Power supply supports non-polarity connection
|
Power
Consumption |
No-load consumption: < 2W
Full-load consumption: < 3W |
Environmental
Limit |
Working temperature: -40~75℃ Storage temperature: -40~85℃ Relative humidity: 5%~95% (no condensation)
|
Physical Characteristic |
Shell: IP40 protection grade, corrugated high strength mental shell Mounting method: DIN-rail or wall-mounted (optional accessories) Size (L×W×H): 138mm×110mm×35mm Weight: 0.57kg
|
Industrial
Standard |
EMI: FCC Part 15, CISPR (EN55022) class A EMS: IEC 61000-4-2 (ESD), Level 3 Contact: 6 kV Air: 8 kV IEC 61000-4-4 (EFT), Level 3 Power: 2 kV Signal: 1 kV IEC 61000-4-5 (Surge), Level 3 Power: common mode 2 kV different mode 1 kV Signal: common mode 2 kV different mode 1 kV Shock: IEC 60068-2-27 Free fall: IEC 60068-2-32 Vibration: IEC 60068-2-6 |
Certification |
CE, FCC, RoHS
|
Warranty |
5 years
|
Ordering Information
Available Models | WAN | LAN | Antenna | Power Supply |
IAP2312N-2T | 1 | 1 | 2 | 12~48VDC or 48VDC POE |