Module 8 kênh đầu vào tương tự HART ICP DAS I-87H17W
The I-87H17W is a HART analog input module. It can measures 4~20mA current and acts as a HART master, allowing communication with HART field devices. Its user-friendly design saves a lot of work when measuring current due to a built-in resistor. Now, users can measure current directly without any external resistor. The baud rate of I-87H17W is changeable and supports DCON protocol. Otherwise, ICP DAS also provides API library for users to develop their own program by VC,VB , C# or VB.Net environment.
.
Applications
|
![]() |

The XPAC-8000 controller and I-87H17W with eight HART AI channels are used to collect these HART manometers data quickly and easily. Through Ethernet, the control center can monitor all gas pipeline pressure remotely.
Features
-
Analog input capability with or without HART
-
Real-time HART data acquisition
-
Full read/write access to all device information
-
Support 4 ~ 20 mA current input
-
2 or 4 wire transmitters of HART
-
With a built-in resistor
-
Open wire detection
-
4 kV ESD protection
-
2500 VDC intra-module isolation
-
Built-in Watchdog
-
RoHS compliance
-
Support DCON Protocol
-
Provide API library and demos
-
Support XPAC, WinPAC, I-87Kx,RU-87Px, USB-87Px, ET-87Px series
Hardware Specifications
|
Analog Input
|
|
|
Input Channels
|
8 Differential 4-20 mA input channels
|
|
HART Wiring
|
2 or 4 wire transmitters
|
|
HART Response Time
|
1s per single channel
|
|
Input Type
|
4~20mA
|
|
Resolution
|
16-bit
|
|
Accuracy / Sampling Rate
|
+/- 0.1% FSR / 10Hz (Total)
|
|
Zero Drift
|
+/- 20μV/ °C
|
|
Span Drift
|
+/- 25μV / °C
|
|
Common Mode Rejection
|
86 dB
|
|
Normal Mode Rejection
|
100 dB
|
|
Input Impedance
|
400 Ohms
|
|
Common Voltage
|
-200V to +200V
|
|
Open Wire Detection
|
Yes
|
|
4KV ESD Protection
|
Yes, Contact for each terminal.
|
|
Isolation
|
UL1577 Spec.
|
|
Interface
|
|
|
Interface
|
RS-485
|
|
Format
|
N81, N82, E81, O81
|
|
Baud Rate
|
1200 ~ 115200bps
|
|
Watchdog
|
|
|
Dual Watchdog
|
Yes, Module(1.6 sec) and Communication(Programable)
|
|
LED
|
|
|
LED Display
|
1 LED as Power Indicator
8 LED as HART Communication Indicator |
|
Power
|
|
|
Power Consumption
|
Maximum : 1.8W
|
|
Mechanism
|
|
|
Dimensions
|
30mm x 102mm x 115mm(W x L x H) Detail
|
|
Environment
|
|
|
Operating Temperature
|
-25 to 75 °C
|
|
Storage Temperature
|
-30 to 75 °C
|
|
Humidity
|
5 to 95% RH, non-condensing
|
Ordering Informations
|
I-87H17W-G CR
|
8-channel HART Current Input Module (Gray Cover) (RoHS)
|
Optional Accessories
| DN-37-A |
I/O Connector Block with DIN-Rail Moun ting and 37-pin D-sub Connector (pitch:5.08mm)
|
| DN-37-381-A |
I/O Connector Block with DIN-Rail Moun ting and 37-pin D-sub Connector (pitch:3.81mm)
|
| CA-3705A |
Male-Female D-sub cable 0.5 M
|
| CA-3710A |
Male-Female D-sub cable 1 M
|
| CA-3715A |
Male-Female D-sub cable 1.5 M
|
Related Products
| Converters |
USB, RS-232, Fiber Optical to RS-485 Converters and Repeaters
|
| Power Supply |
24 VDC power supply
|
| Relay Module |
External relay modules for I-7000 DO module
|
| Learning Kit |
Beginner learning kit
|
| Application Books |
Application books designed with our products
|

