Module 8 kênh đầu vào tương tự (AI) ICP DAS I-8017H
Specification
| Analog Input | |
| Input Channels | 8-ch Differential |
| Input Range | +/- 10 V, +/- 5 V, +/- 2.5 V, +/- 1.25 V, -20 mA ~ +20 mA (Requires Optional External 125 Ohm Resistor) |
| Resolution | 14-bit |
| Sample Rate | Single Channel Polling Mode :100K S/s Single Channel Interrupt Mode: 50K S/s 8 channel Scan Mode : 16 K S/s |
| Accuracy | ±0.1% of FSR |
| Input Impedance | 20 K, 200 K, 20 M (Jumper Select) |
| Input Bandwidth | 100 KHz |
| LED Display | |
| 1 LED as Power Indicator/16 LED as Status Indicator | |
| Power | |
| Power Consumption | 2 W Max |
| Environment | |
| Operating Temperature | -25 ~ 75 °C |
| Storage Temperature | -30 ~ 75 °C |
| Humidity | 5 ~ 95%, Non-condensing |
| Dimensions | |
| 30 mm x 88 mm x 115 mm (W x L x H) Detail | |
Ordering information
| I-8017H | 14-bit 100K sampling rate 8-channel analog input module (Blue Cover) |
| I-8017H-G | 14-bit 100K sampling rate 8-channel analog input module (Gray Cover) |
| I-8017H CR | 14-bit 100K sampling rate 8-channel analog input module (Blue Cover) (RoHS) |
| I-8017H-G CR | 14-bit 100K sampling rate 8-channel analog input module (Gray Cover) (RoHS) |
 |
|
I-8017H Internal I/O Structure
| Voltage Input Wiring |  |
| Current Input Wiring |  |
| Screw wire into I-8017H |  |
| Jumper position |  |
| Input impedance setting jumper Default : 200K Ohm Both of them should set on the same value, and input impedance |  |
Note 1: I-8017H module has Input impedance setting jumper on the PCB board Version 5.6 or later .
The PCB board Version before 5.5 doesn’t have the Jumper ,it only can use inside Default value : 200K Ohm
