Module RS-485 DCON 2 kênh đầu vào bộ đếm/tần số (Counter/Frequency) ICP DAS I-7080B
Features
- 2-channel Counter/Frequency Input
- 32-bit Counter
- Isolated or Non-isolated Input
- Programmable Alarm Output
- Programmable Digital Filter
- Programmable Threshold Voltage Level
- Maximum Frequency of up to 100 kHz
- Built-in Virtual Battery Backup to Preserve Counter Values
(I-7080B(D), M-7080B(D)) - Dual Watchdog
- Wide Operating Temperature Range: -25 ~ +75°C
Introduction
The I-7080 offers 2 high speed counter or frequency input channels and 2 digital output channels. Two types of digital input are provided, one for isolated input, and the other is for non-isolated input. The isolated input provides 3750 Vrms isolation voltage and the non-isolated input provides programmable threshold voltage level. The built-in digital filter is valid for both non-isolated and isolated input and can filter out noise where the high/low pulse width is smaller than the minimum high/low width of the digital filter. The maximum count is up to 32-bit and the maximum frequency is up to 100 kHz. The module also provides programmable alarm output with non-isolated open collectors. The M-7080 supports both the Modbus RTU and DCON protocols, which can be configured via software, and all hardware specifications are the same as the I-7080. The functions of the I-7080B are the same as that of the I-7080, except that the I-7080B provides a virtual battery backup function in counter mode.
Application
- Building Automation
- Factory Automation
- Machine Automation
- Remote Maintenance
- Remote Diagnosis
- Testing Equipment
System Specification
Models | I-7080 | I-7080D | I-7080B | I-7080BD | M-7080 | M-7080D | M-7080B | M-7080BD |
Communication | ||||||||
Interface | RS-485 | |||||||
Format | (N, 8, 1) (N, 8, 2) (E, 8, 1) (O, 8, 1) | |||||||
Baud Rate | 1200 ~ 115200 bps | |||||||
Protocol | DCON | Modbus RTU, DCON | ||||||
Dual Watchdog | Yes, Module (1.6 Seconds), Communication (Programmable) | |||||||
LED Indicator/Display | ||||||||
System LED Indicator | Yes, 1 LED as Power/Communication Indicator | |||||||
I/O LED Indicator | – | |||||||
7-Segment LED Display | – | Yes | – | Yes | – | Yes | – | Yes |
Isolation | ||||||||
Intra-Module Isolation, Field-to-Logic | 3000 VDC | |||||||
EMS Protection | ||||||||
ESD (IEC 61000-4-2) | ±4 kV Contact for each Terminal | |||||||
EFT (IEC 61000-4-4) | ±4 kV for Power Line | |||||||
Surge (IEC 61000-4-5) | ±0.5 kV for Power Line | |||||||
Power | ||||||||
Reverse Polarity Protection | Yes | |||||||
Input Range | 10 ~ 30 VDC | 24 ~ 30 VDC | 10 ~ 30 VDC | 24 ~ 30 VDC | ||||
Consumption | 2.0 W | 2.2 W | 2.0 W | 2.2 W | 2.0 W | 2.2 W | 2.0 W | 2.2 W |
Mechanical | ||||||||
Dimensions (W x L x H) | 72 mm x 123 mm x 35 mm | |||||||
Installation | DIN-Rail or Wall Mounting | |||||||
Environment | ||||||||
Operating Temperature | -25 ~ +75°C | |||||||
Storage Temperature | -40 ~ +85°C | |||||||
Humidity | 10 ~ 95% RH, Non-condensing |
I/O Specification
Models | I-7080/I-7080D | I-7080B/I-7080BD | M-7080/M-7080D | M-7080B/M-7080BD | |
Frequency/Counter Input | |||||
Channels | 2 | ||||
Contact | Wet | ||||
Sink/Source (NPN/PNP) | Sink | ||||
On Voltage Level | Isolated | +3.5 ~ +30 VDC | |||
Non-isolated | +2.4 ~ +5 VDC | ||||
Off Voltage Level | +1 VDC Max. | ||||
Programmable Filter | 2 μs to 65 ms | ||||
Programmable Threshold Voltage | +0.1 ~ +5 VDC | ||||
Individual Channel Configuration | No | ||||
Counter/Encoder-bits | 32-bit | ||||
Counter Mode | Up | ||||
Encoder Mode | – | ||||
Frequency Mode | Yes | ||||
Virtual Battery Backup | – | Yes | – | Yes | |
Frequency Accuracy | 1 Hz or 10 Hz | ||||
Max. Speed | 100 KHz | ||||
Digital Output | |||||
Channels | 2 | ||||
Type | Open Collector | ||||
Sink/Source (NPN/PNP) | Sink | ||||
Load Voltage | +3.5 ~ +30 VDC | ||||
Max. Load Current | 30 mA/Channel |
Ordering information
I-7080 CR | 2-channel Counter/Frequency Input Module with DCON Protocol (Blue Cover) (RoHS) |
I-7080-G CR | 2-channel Counter/Frequency Input Module with DCON Protocol (Gray Cover) (RoHS) |
I-7080D CR | I-7080 with 7-segment LED Display (Blue Cover) (RoHS) |
I-7080B-G CR | 2-channel Counter/Frequency Input Module with DCON Protocol with Virtual Battery Backup (Gray Cover) (RoHS) |
I-7080BD-G CR | I-7080B with 7-segment LED Display (Gray Cover) (RoHS) |
M-7080-G CR | 2-channel Counter/Frequency Input Module with DCON and Modbus Protocol (Gray Cover) (RoHS) |
M-7080D-G CR | M-7080 with 7-segment LED Display (Gray Cover) (RoHS) |
M-7080B-G CR | 2-channel Counter/Frequency Input Module with DCON and Modbus Protocol with Virtual Battery Backup (Gray Cover) (RoHS) |
M-7080BD-G CR | M-7080B with 7-segment LED Display (Gray Cover) (RoHS) |