Module RS-485 DCON 1 kênh đầu vào RTD + 2 kênh DO + 1 kênh DI ICP DAS I-7013
Features
- M-7013P and M-7013PD
-
- High/Low Alarm for Digital Output
Công ty thiết kế cảnh quanhttps://hoangnguyengreen.com/dich-vu/thiet-ke-canh-quan-p15.html, thiết kế sân vườn chuyên nghiệp. Chuyên thiết kế cảnh quan các công trình với phong cách mới mẻ, độc đáo nhưng không làm mất đi vẻ hài hòa vốn có của không gian sống. Liên hệ ngay với Hoàng Nguyên Green hôm nay để đội ngũ nhân viên với nhiều năm kinh nghiệm của chúng tôi tư vấn và báo giá tốt nhất cho bạn nhé, chúng tôi đảm bảo bạn sẽ không những không thất vọng khi đến với Hoàng Nguyên Green mà bạn còn phải thốt lên là tại sao không đến với chúng tôi sớm hơn.
- 50Hz Event Counter for Digital Input
- ±120 VDC Overvoltage Protection
-
- 1-channel RTD Input
- Lead Resistance Elimination for 3/4-wire Connection
- Open Wire Detection
- 3000 VDC Intra-module Isolation
- Dual Watchdog
- Wide Operating Temperature Range: -25 to +75°C
Introduction
The I-7013(D) and M-7013P(D) is a 1-channel RTD Input module that is used for measuring temperatures via an RTD sensor and supports Pt100, Ni120, and Pt1000 type sensors. The module allows 2/3/4-wire RTD connections and features open wire detection. In addition, the I-7013(D) and M-7013P(D) also includes 3000 VDC intra-module isolation and supports lead resistance elimination for 3/4-wire connections. The M-7013P and M-7013PD added support for 1-channel digital input as 50 Hz event counter and 2-channel digital output as high/low alarm. The M-7013P and M-7013PD support both the Modbus RTU and DCON protocols, which can be configured via software.
Application
- Building Automation
- Factory Automation
- Machine Automation
- Remote Maintenance
- Remote Diagnosis
- Testing Equipment
I/O Specification
Models | I-7013 | I-7013D | M-7013P | M-7013PD |
RTD Input Module | ||||
Channels | 1 | |||
Wiring | 2/3/4-wire | |||
Sensor Type | Pt100, Pt1000, Ni120 | |||
Resolution | 16-bit | |||
Accuracy | ±0.05% | |||
Sampling Rate | 10 Hz | |||
Individual Channel Configuration | No | |||
Overvoltage Protection | ±5 VDC | ±120 VDC | ||
Open Wire Detection | Yes | |||
3-wire RTD Lead Resistance Elimination | Yes | |||
Resistance Measurement | 3.2 kΩ Max. | |||
Digital Input | ||||
Channels | – | 1 | ||
Sink/Source (NPN/PNP) | Source, Dry Contact | |||
ON Voltage Level | Close to GND | |||
OFF Voltage Level | Open | |||
Counter(50 Hz, 16-bit) | Yes | |||
Overvoltage Protectio | ±30 VDC | |||
Digital Output | ||||
Channels | – | 2 | ||
Type | Open Collector, MOSFET | |||
Sink/Source (NPN/PNP) | Sink | |||
Load Voltage | 3.5 ~ 50 VDC | |||
Max. Load Current | 700 mA/Channel | |||
Overvoltage Protection | 60 VDC | |||
Overload Protection | 1.4 A (with Short-circuit Protection) | |||
Power-on Value | Yes | |||
Safe Value | Yes |
System Specification
Models | I-7013 | I-7013D | M-7013P | M-7013PD |
Communication | ||||
Interface | RS-485 | |||
Bias Resistor | No (Usually supplied by the RS-485 Master. Alternatively, add a tM-SG4 or SG-785.) | |||
Format | (N, 8, 1) (N, 8, 2) (E, 8, 1) (O, 8, 1) | |||
Baud Rate | 1200 to 115200 bps | |||
Protocol | DCON | DCON Modbus/RTU | ||
Dual Watchdog | Yes, Module (1.6 Seconds), Communication (Programmable) | |||
LED Indicator/Display | ||||
System LED Indicator | Yes, 1 as Power/Communication Indicator | |||
I/O LED Indicator | – | |||
7-Segment LED Display | – | Yes | – | Yes |
Isolation | ||||
Intra-Module Isolation, Field-to-Logic | 3000 VDC | |||
EMS Protection | ||||
ESD (IEC 61000-4-2) | ±2 kV Contact for each Terminal | ±4 kV Contact for each Terminal and 8 kV Air for random point |
||
EFT (IEC 61000-4-4) | ±4 kV to Power Line | |||
Surge (IEC 61000-4-5) | ±0.5 kV for Power Line | |||
Power | ||||
Reverse Polarity Protection | Yes | |||
Input Range | +10 ~ +30 VDC | |||
Consumption | 0.7 W | 1.3 W | 0.6 W | 1.2 W |
Mechanical | ||||
Dimensions (L x W x H) | 123 mm x 72 mm x 35 mm | |||
Installation | DIN-Rail or Wall Mounting | |||
Environment | ||||
Operating Temperature | -25 to +75°C | |||
Storage Temperature | -40 to +85°C | |||
Humidity | 10 to 95% RH, Non-condensing |
Ordering information
I-7013 CR | 1-channel RTD Input Module using the DCON Protocol (Blue Cover) (RoHS) |
I-7013-G CR | 1-channel RTD Input Module using the DCON Protocol (Gray Cover) (RoHS) |
I-7013D CR | I-7013 with 7-segment LED Display (Blue Cover) (RoHS) |
M-7013P-G CR | 1-channel RTD Input Module using the DCON and Modbus Protocols (Gray Cover) (RoHS) |
M-7013PD-G CR | M-7013P with 7-segment LED Display (Gray Cover) (RoHS) |