Bộ lọc và chia kênh tín hiệu HART ICP DAS HRT-370
HRT-370 is a HART signal filter specially designed to solve the issue that analog signal gets interfered while additional HART signal adding to communication process. When connecting HRT-370 to a HART instrument, it splits the input HART signal to two output channels, one keeps the original HART signal and another filter the HART signal out to output pure analog signal. Therefore, users can make both HART and analog current data collection and processing easier and more precise by applying HRT-370. .
Applications

Features
- 1 analog current output (HART signal filter) channel
- 1 by pass HART signal channel
- Support HART Burst mode
- Support point-to-point HART mode
- Allow two HART masters
- Support Loop Power function (module provides +30V)
- Provide PWR/ HART/ AO indication LED
- 4KV ESD Protection
- 250Ω load resistor
- Support din-rail installation
Hardware Specifications
| Analog Input with HART Interface | |
| HART Connector | One 4-pin screwed terminal block (LP+, H+, H-) |
| HART Device | 2-wired or 4-wired HART devices (Point to Point) |
| 4KV ESD Protection | Yes |
| Isolation Voltage | 2500 VDC |
| Loop Power | Yes (module provides +30V output) |
| Auxiliary Supply | 24V @ 20mA |
| Input Impedance | 250Ω±5% (2W) |
| Analog Output Interface | |
| Analog Output Connector | One 4-pin screwed terminal block (IOUT+, IOUT-) |
| Current Output Capacity | External +30V @ 800Ω (Sink) |
| Zero/Span Drift (25℃) | 4~20mA ± 0.1% FSR |
| Zero/Span Drift (-30/+80℃) | 4~20mA ± 0.5% FSR |
| Response Time | 40ms @ 250 Ω |
| Isolation Voltage | 2500VDC |
| Power | |
| Power supply | Unregulated +10 ~ +30 VDC |
| Protection | Power reverse polarity protection, Over-voltage brown-out protection |
| Power Consumption | Maximum: (20mA) => 0.05mA @ 30VDC, 1.5W |
| Mechanism | |
| Installation | DIN-Rail |
| Dimensions (W x L x H) | 25 mm x 116 mm x 120 mm |
| LED Display | PWR: Module power status HART: HART connection status AO: AO connection status |
| Environment | |
| Operating Temp. | -25 ℃ ~ +75 ℃ |
| Storage Temp. | -30 ℃ ~ +80 ℃ |
| Humidity | 5% ~ 95% RH, non-condensing |
Ordering Informations
|
HRT-370
|
HART Signal Filter (Upright) (RoHS) |
