Bộ chuyển đổi Modbus Gateway 4 cổng RS-232 sang Ethernet 3Onedata GW1104-4D(RS-232)
Features
Support 4 RS-232, RS-485/422 or 3IN1 serial port to 1 10/100Base-T(X) self-adaptive Ethernet interface
Support conversion between Modbus RTU/ASCII and Modbus TCP protocol
Support RTU Master, RTU Slave, ASCII Master, ASCII Slave and other operating modes
Support virtual and real ID mapping to achieve flexible access between Master and Slave devices
Support -40~75℃ wide temperature operation
Introductions
GW1104 series of Modbus gateway are designed for integrating Modbus RTU/ASCII and Modbus TCP; they can achieve the conversion between Modbus RTU/ASCII and Modbus TCP protocol. This series provide 3 types of products and support 4 RS-232, RS-485/422 or 3IN1 serial port and 1 100M Ethernet copper port. They adopt wall or desktop mounting to meet the requirements of different application scenes.
Modbus gateway supports multiple network protocols, such as Modbus, TCP, IP, UDP, TELNET, ARP, ICMP, HTTP, DNS and DHCP protocols. It possesses complete management function, and supports access control, rapid configuration, online upgrading, etc. RTU Master, RTU Slave, ASCII Master, ASCII Slave and other operating modes are supported; it supports up to 32 TCP Slave requests under Master mode and 16 TCP Master connections under Slave mode. TELNET, WEB and other access modes are also supported. It can provide you with good user experience via friendly design of network management system interface, simple and convenient operation.
DIP switch or RST button can achieve the device restore factory defaults. Hardware adopts fanless, low power consumption, wide temperature and voltage design and has passed rigorous industrial standard tests, which can suit for the industrial scene environment with harsh requirements for EMC. It can be widely used in PLC control and management, Building Automation System, Health Care Automation System, measuring instrument and environmental forces monitoring system.
Features and Benefits
Support 10/100Base-T(X) self-adaptive Ethernet interface
Support 300bps-115200bps line speed and non-blocking communication
Support RTS/CTS, DTR/DSR and XON/XOFF flow control
Support response timeout setting of characters
Support RTU Master, RTU Slave, ASCII Master, ASCII Slave and other operating modes
Support up to 32 TCP Slave requests under Master mode
Support up to 16 TCP Master connections under Slave mode
Support virtual and real ID mapping to achieve flexible access between Master and Slave devices
Support IP address and MAC address filtering, which is easy to achieve accurate access control
Support classification of user management to achieve humanized permission management
Support monitoring for serial port status and parameters, so the communication status will be clear at a glance
Support Windows configuration tool, TELNET, WEB configuration forms and access control
File management is convenient for the device rapid configuration and online upgrading
Specification
| Ethernet Port |
Standard: 10Base-T, 100Base-TX Protocol: Modbus TCP, TCP, IP, UDP, ARP, HTTP, TELNET, SNMP, ICMP, DHCP, DNS Rate: 10/100M automatic flow control, MDI/MDI-X autotunning Interface quantity: 1 Interface form: RJ45 Duplex mode: full/half duplex mode self-adaption
|
| Serial Port |
Standard: EIA RS-232C, RS-485, RS-422 Protocol: Modbus RTU/ASCII Quantity of serial port: 4 RS-232, RS-485/422 or 3IN1 serial port RS-232 signal: DSR, RTS, GND, TXD, RXD, DCD, CTS, DTR RS-485 signal: D+, D-, GND RS-422 signal: T+, T-, GND, R+, R- Baud rate: 300-115200bps Data bit: 5bit, 6bit, 7bit, 8bit Parity bit: None, Even, Odd, Space, Mark Stop bit: 1bit, 2bit Interface form: RS-232 serial port, adopt RJ45; RS-485/422 serial port with isolation, adopt 5-pin 5.08mm pitch terminal blocks; 3IN1 serial port, adopt RJ45 Flow control: RTS/CTS, DTR/DSR, XON/XOFF Directional control: RS-485 direction adopts Automatic Data Direction Control technology Pull high/low resistor for RS-485: 4.7 kΩ Intensity of electromagnetic isolation: RS-485/422 serial port (terminal block), 3KVDC/2KVrms Operating mode: RTU Master, RTU Slave, ASCII Master and ASCII Slave Connection quantity: up to 32 TCP Slave requests are supported under Master mode up to 16 TCP Master connections are supported under Slave mode
|
| Configuration |
WEB configuration management, TELNET configuration, Windows configuration tool
|
| Security |
Classification of User Permissions, IP address filtering, MAC address filtering, WEB Console, TELNET Console
|
|
Indicator
|
Power supply indicator, running indicator, Ethernet port indicator, serial port indicator |
|
Power Requirement
|
GW1104-4D(RS-232) Power supply range: 9~48VDC Connection mode: 2-pin 5.08mm pitch terminal blocks GW1104-4DI(RS-485), GW1104-4D(3IN1)-RJ45 Power supply range: 12~48VDC Connection mode: 3-pin 5.08mm pitch terminal blocks Power supply protection: nonpolarity connection
|
| Power
Consumption |
No-load: ≤2.94W@12VDC Full-load: ≤3.00W@12VDC
|
| Environmental
Limit |
Operating temperature range: -40~75℃ Storage temperature range: -40~85℃ Relative humidity: 5%～95%（no condensation）
|
| Physical
Characteristic |
Housing: IP30 protection, metal Installation: wall or desktop mounting Dimension (W x H x D): 160mm×28mm×95.5mm (RS-232); 170mm×31.5mm×110mm (RS-485/422, 3IN1) Weight: ≤590g
|
| Industrial
Standard |
IEC 61000-4-2 (ESD, Electro-static Discharge), Level 4 Air discharge: ±15kV Contact discharge: ±8kV IEC 61000-4-4 (EFT/B, Electrical Fast Transient/Burst), Level 3 (except RS-232) Power supply: ±2kV Signal: ±1kV IEC 61000-4-5 (Surge), Level 3 (except RS-232) Power supply: common mode ±2kV, differential mode ±1kV Signal: common mode ±2kV, differential mode ±1kV Shock: IEC 60068-2-27 Free fall: IEC 60068-2-32 Vibration: IEC 60068-2-6
|
| Certification |
CE, FCC, RoHS
|
| Warranty |
3 years |
Dimension
Unit:mm
GW1104-4D(RS-232)
GW1104-4DI(RS-485), GW1104-4D(3IN1)-RJ45
Ordering Information
| Available Models | 100M Copper Port | RS-232 Port | RS-485/422 Port | RS-232/485/422 Port | Power Supply Range |
| GW1104-4D(RS-232) | 1 | 4 | – | – | 9~48VDC |
| GW1104-4DI(RS-485) | 1 | – | 4 | – | 12~48VDC |
| GW1104-4D(3IN1)-RJ45 | 1 | – | – | 4 |