Module FRnet 16 kênh đầu vào số (DI) ICP DAS FR-2053
Features
- Built-in Wire-saving FRnet DI/DO control
- High-speed transmission reliability
- Simple synchronization mechanism
- No software overhead on protocol processing
- Supporting broadcasting (1:n data transmission)
- Duplicating output easily
- Fixed I/O scan-time and I/O synchronization
- DIN-Rail mountable
Introduction
The FR-2053/2053T/2053HT has 16-channel isolated photo coupler input, while the FR-2057/2057T/2057HT has 16-channel isolated photo-coupler output. The default signal connector of FR-2053 and FR-2057 is a 20-pin header. The “T” stands for screw terminal connector and the “S” stands for 3-pin shroud connector. Each 3-pin connector has one Vcc pin, one ground and one signal pin. According to different applications, the users can choose suitable modules. The FR-2000 I/O module has an FRnet interface. The users can daisy chain several FR-2000 modules together. Via FRnet, the FR-2000 modules can extend the remote I/O control of PC, PAC and PLC easily. Further information about the networking of FR-2053/2057; refer to literature related to I-7188EF, I-8172W, FRB-100/200U.
Specifications
| Analog Input | |
| Input Channels | 16 |
| Input Type | Sink (NPN) |
| On Voltage Level | +20~24VDC |
| Off Voltage Level | +3VDC max |
| Input Impedance | 4.7 kOhm |
| Turn-on delay time | less than 1.0ms |
| Turn-off delay time | less than 1.0ms |
| Isolation Voltage | 1500Vrms |
| Interface | |
| 2-wire cabling | 2-wire cabling Belden 9841 (2P twisted-pair cable), When different cables are used, the transmission distance may change |
| Transfer distance | Max. 400m for FR-2053/FR-2053T Max. 100m for FR-2053HT |
| LED Indicators | Power, Communication Run, Communication Error, Terminal resistor, Digital output |
| Transfer speed | 250 kbps for FR-2053/FR-2053T 1 Mbps for FR-2053HT |
| Cyclic scan time | 2.88ms for FR-2053/FR-2053T 0.72ms for FR-2053HT |
| Connection | 20-pin header for FR-2053 |
| Removable 20-pin Terminal Block for FR-2053T/FR-2053HT | |
| Power | |
| Input Voltage Range | +10 ~ +24 VDC (Non-isolation) |
| Power Consumption | 2 W Max. |
| Protection | Power reverse polarity protection |
| Frame Ground for EMS Protection | Yes |
| Connector | 5-Pin Removable Terminal Block |
| Mechanical | |
| Mechanical | Plastic (Flammability UL 94V-0) |
| Dimensions (W x L x H) | 33 mm x 102 mm x 110 mm |
| Installation | DIN-Rail |
| Environment | |
| Operating Temperature | -25 °C ~ +75 °C |
| Storage Temperature | -30 °C ~ +85 °C |
| Ambient Relative Humidity | 10% ~ 90% RH, non-condensing |
Ordering Information
| FR-2053 | 16-channel isolated digital input with 20-pin header |
| FR-2053T | 16-channel isolated digital input module with 20-pin screw terminal connector |
| FR-2053HT | 16-channel isolated digital input module with 20-pin screw terminal connector |
Acessories
| DN-20 (Pitch:5.08mm) | DIN-rail mounting terminal board with two CA-2010 cable, 1m |
| DN-20-381 (Pitch:3.81mm) | DIN-rail mounting terminal board with two CA-2010 cable, 1m |