Module EtherNet/IP 6 kênh đầu vào số (DI) + 6 kênh ra Relay ICP DAS EIP-2060
The EIP-2000 is an industrial remote I/O module series supporting the EtherNet/IP protocol. Users can seamlessly integrate these modules into the Ethernet network from the industrial floor to the enterprise. The EIP-2000 allows daisy chain connection which permits the flexibility in locating devices, eases installation and lowers infrastructure costs. All the modules can be deployed in the network topologies such as star, line or ring. The isolation design protects the EIP-2000 against the harmful interference.
The EIP-2060 is a remote digital I/O module with 6 DIs and 6 Relay. It is designed as an EtherNet/IP adapter. Users can obtain the I/O status as well as the connection status of the EIP-2060 by the LEDs. In addition, ICPDAS provides software utility to easily configure and test the EIP-2000 modules via Ethernet.
Applications
|
Features
General Features:
- Transfer protocol: EtherNet/IP
- Powerful 32-bit MCU handles efficient network traffic
- 10/100 Base-TX Ethernet, RJ-45 x 2 (Auto-negotiating, auto MDI/MDIX, LED Indicators)
- Support ARP,TCP, UDP, ICMP, DHCP, BOOTP and TFTP protocols
- Easy firmware update via Ethernet
- Removable terminal block connector
- LED indicators to display the I/O status
- Built-in I/O
- DI/Counter: 6 Channels
- Relay: 6 Channels
- Power-On Value
- Safe Value
- RoHS compliant
Utility
ICP DAS provides the EIP-2000 configuration utility for Windows 2K/XP/Vista and Win 7.
- Network parameters configuration
- Settings for power-on value and safe value
- DI counters inspection
- Easy test to transmit/receive the I/O status by EtherNet/IP
- Setting files management
Hardware Specifications
Digital Input | ||
Channels | 6 | |
Input Type | Dry Contact: Source, Wet Contact: Sink / Source | |
Dry Contact Level | Off Voltage Level: Open On Voltage Level: Close to GND |
|
Wet Contact Level | Off Voltage Level: +4V max. On Voltage Level: +10 V ~ +50 V |
|
Counters | Channels | 6 |
Max. Counts | 32-bit (4294967295) | |
Max. Input Frequency | 5KHz | |
Photo-Isolation | 3750 VDC | |
Digital Output | ||
Channels | 6 | |
Output Type | Form A(SPST-NO) | |
Contact Rating(Resistive Load) | 5A 250VAC (47~63Hz) 5A 30 VDC |
|
Operate Time | 10ms max. | |
Release Time | 5ms max. | |
Insulation Resistance | 1,000MΩs at 500 VDC | |
Dielectric Strength | Between Open Contact | 1000VAC (1 min.) |
Between Coil and Contacts | 3000VAC (1 min.) | |
Endurance | Mechanical | 20,000,000 times min. |
Electrical | 100,000 times min. | |
Communication Interface | ||
Connector | 10/100 Base-TX, 8-pin RJ-45 x 2 Support daisy chain connection |
|
Standard Supported | IEEE 802.3 Ethernet/IP | |
Power | ||
Input Voltage Range | 10V ~ 30V | |
Power Consumption | 1.6W | |
Mechanism | ||
Installation | DIN-Rail | |
Dimensions | 110mm x 90mm x 33mm (H x W x D) | |
Environment | ||
Operating Temperature | -25℃ ~ +75℃ | |
Storage Temperature | -30℃ ~ +80℃ | |
Humidity | 10 ~ 90% RH, non-condensing |
Ordering Informations
EIP-2060 CR
|
Isolated 6-ch DI & 6 Relay Output EtherNet/IP I/O Module |
Optional Accessories
MSM-6226 CR | 24-Port L2 Plus Managed Fast Ethernet Switch + 2 TP/SFP Gigabit Dual Media (RoHS) |
NS-205 CR | Unmanaged 5-Port Industrial Ethernet Switch (RoHS) |
NS-205PSE CR | Unmanaged Ethernet Switch with 4 PoE Ports and 1 RJ-45 Uplink (RoHS) |
NS-205PSE-24V CR | Unmanaged 5-Port 10/100 Mbps PoE(PSE) Ethernet Switch; 24 VDC Input |
NSM-205PSE-24V CR | Unmanaged 5-Port 10/100 Mbps PoE(PSE) Ethernet Switch with Metal Casing; 24 VDC Input |