Bộ chuyển đổi EtherCAT sang Modbus RTU và Power Meter ICP DAS ECAT-2610-DW CR
ECAT-2610-DW has EtherCAT to Modbus RTU gateway function, and can integrate smart meter slave devices such as PM-3033/3133/3114/3112 into EtherCAT control system through the special configuration file that provided by ICP DAS. And very easy to install and configure. The EtherCAT master can access RxPDO and TxPDO to connect multiple smart meter slave devices such as PM-3033/3133/3114/3112. It can achieve a more diversified energy management program.
Applications

Features
• Supports maximum 128 Input and Output Data
• Supports maximum 6 connection for PM-3033/3133
• 2 x RJ-45 bus interface, Integrate RS-232/422/485 serial device to EtherCAT
• Allows system integrators to retro-fit older automation devices into modern
• EtherCAT communication structures
• Supports blended to other Modbus slave
• Supports maximum Baud Rate 115200 bps
Specifications
| COM Ports | |
|---|---|
| Ports | 1 x RS-232/422/485 |
| Protocol | Modbus RTU |
| EtherCAT | |
|---|---|
| Ports | 2 x RJ-45 Distance between Stations: Max. 100 m (100BASE-TX) Data Transfer Medium: Ethernet/EtherCAT Cable (Min. CAT 5e) |
| Cycle Time | 10 ms |
| Distributed Clocks | N/A |
| Power | |
|---|---|
| Reverse Polarity Protection | Yes |
| Input Range | +12 VDC ~ +48 VDC |
| Consumption | 0.1 A @ 24 VDC |
| Mechanical | |
|---|---|
| Casing | Plastic |
| Dimensions (mm) | 33 x 127 x 99 (W x L x H) |
| Installation | DIN-Rail |
| Environment | |
|---|---|
| Operating Temperature | -25 ~ +75 °C |
| Storage Temperature | -30 ~ +80 °C |
| Humidity | 10 ~ 90% RH, Non-condensing |
Ordering Information
| ECAT-2610-DW CR | EtherCAT Slave to Modbus RTU and Power Meter Gateway (RoHS) Includes CA-0915 (DB9 Male to DB9 Female Cable, 1.5 M) |
