Bộ chuyển đổi Profibus sang Ethernet ICP DAS I-7550E
The I-7550E Converter is specially designed for the slave device of PROFIBUS DP protocol. It allows the PROFIBUS master to access any kinds of Ethernet devices supporting TCP/UDP protocol. The I-7550E can be set as TCP/UDP server and client, it’s flexible for user to match their requirement. In addition, the I-7550E module built-in web server, the user can set the module by web browser. By using this module, users can put their Ethernet devices into PROFIBUS network very easily.

Applications
-
Industrial Automation
-
Factory Automation
-
Process Automation
-
Etc…
Features
| Protocol & Hierarchy | DP-V0 Slave |
| Supports PROFIBUS Transmission Rate (kbps) | 9.6, 19.2, 45.45, 93.75, 187.5, 500, 1500, 3000, 6000, 12000 |
| Transmission Rate Setting | detected automatically |
| Max Input Data Length | 240 Bytes |
| Max Output Data Length | 240 Bytes |
| Address Setting | 0~126 set by DIP switch or EEPROM |
| Supports Ethernet Protocol | TCP/UDP Server/Client |
| Configuration | Web Configuration |
| Ethernet | 10/100 Base-TX |
| Indicators | PWR, ERR, and RUN LEDs |
| Network Isolation Protection | 2500 Vrms High Speed iCoupler |
| DC Isolation Protection | 3000 VDC on PROFIBUS side |
Web-based Administration
- Provide network configuration
- Provide TCP/UDP Server/Client configuration
- Show diagnostic messages and device information
- Show communication log between I-7550E and Ethernet devices

Ethernet Protocol Support
| TCP/UDP | Server/Client Total Maximum 8 Clients for Server mode Total Maximum 8 remotes for Client mode |
Hardware Specifications
| Hardware | |
| CPU | 80186, 80 MHz or compatible |
| SRAM/Flash/EEPROM | 512 KB / 512 KB / 16 KB |
| Watchdog | Watchdog IC CPU built-in |
| ESD Protection | 4 kV class A |
| PROFIBUS Interface | |
| Controller | Profichip VPC3+C |
| Transceiver | ADI ADM2486 |
| Connector | 9-pin female D-Sub |
| Baud Rate (bps) | 9.6 k, 19.2 k, 45.45 k, 93.75 k, 187.5 k, 500 k, 1.5 M, 3 M, 6 M, 12 M |
| Transmission Distance (m) | Depend on baud rate (for example, max. 1200 m at 9.6 kbps ) |
| Isolation | 3000 VDC for DC-to-DC, 2500 Vrms for bus-to-logic |
| Protocol | DP-V0 |
| UART Interface | |
| COM | RS-232 (For updating firmware) |
| COM Connector | 5-pin screwed terminal block (TxD, RxD, RTS, CTS, GND ) |
| Baud Rate (bps) | 115200 |
| Data bit | 8 |
| Stop bit | 1 |
| Parity | None |
| Ethernet Interface | |
| Controller | 10/100Base-TX Ethernet Controller (Auto-negotiating, Auto_MDIX) |
| Connector | RJ-45 with LED indicator |
| LED | |
| Round LED | PWR LED, RUN LED, ERR LED |
| Power | |
| Power supply | Unregulated +10 ~ +30 VDC |
| Protection | Power reverse polarity protection, Over-voltage brown-out protection |
| Power Consumption | 2.5 W |
| Mechanism | |
| Installation | DIN-Rail |
| Dimensions | 72mm x 33mm x 119mm (W x L x H) |
| Environment | |
| Operating Temp. | -25 ~ 75 ℃ |
| Storage Temp. | -30 ~ 85 ℃ |
| Humidity | 5 ~ 95% RH, non-condensing |
Ordering Information
|
I-7550E CR
|
PROFIBUS/Ethernet Converter(RoHS) |
|
I-7550E-M CR
|
PROFIBUS/Ethernet Converter(RoHS) (Metal casing) |
