Splitter PoE công nghiệp ICP DAS NS-200PS
Features
- Supports 10/100/1000 Base-TX for PoE in and Data out
- IEEE 802.3af compliant split power/data from PoE equipment
- Power isolation and short circuit protection for power output
- Supports output power up to 10 W at 24 VDC
- Slim packaging fits on your DIN-Rail Mounting
- Supports operating temperatures from -40 °C ~ +75 °C
Introduction
The NS-200PS plays the role of PD, and splits the data signal and power signal that are transmitted from the PSE. The NS-200PS plays a dual role of providing power to industrial devices, and enabling Ethernet connections.
Application

Specification
| Technology | |
| Standards | IEEE 802.3, 802.3u, 802.3x ,802.3af (Power over Ethernet) |
| PoE Input | |
| IEEE 802.3af PoE Operation | Powered Device (PD) |
| PoE Power Input Range | +46 VDC ~ +54 VDC |
| PoE Power Input | Automatic detection and classification (power is accepted on either the signal or unused pairs) |
| Power Output | |
| Voltage Output | 24 VDC, 0.42 Amps |
| Power Output | 10 watts |
| Cable Length | |
| The specified maximum length of cable allowed between the PoE Switch and Ethernet device should be 100 meters or approximately 300 feet. The NS-200PS is not a repeater and does not amplify the Ethernet data signal. | |
| Mechanical | |
| Casing | Plastic (Flammability UL 94V-0) |
| Dimensions (W x L x H) | 33 mm x 78 mm x 107 mm |
| Installation | DIN-Rail Mounting |
| Environment | |
| Operating Temperature | -40 °C ~ +75 °C |
| Storage Temperature | -40 °C ~ +85 °C |
| Ambient Relative Humidity | 10% ~ 90% RH, non-condensing |
Ordering information
| NS-200PS CR | Industrial PoE Splitter (RoHS) |
