Module Zigbee 6 kênh đầu vào số + 4 kênh đầu ra Relay ICP DAS ZT-2060
Features
- ISM 2.4 GHz Operating Frequency
- Fully Compliant with 2.4G IEEE 802.15.4 / ZigBee Specifications
- Wireless Transmission Range up to 700 m (Default)
- Adjustable RF Transmission Output Power
- External DIP and Rotary Switches for easy Configuration
- GUI Configuration Software (Windows Version)
- Supports AES-128 Encryption for the Wireless Communication (Passive)
- Supports ZigBee Repeater Function
- 6 Digital Input Channels and 4 Relay Output Channels
- All Channels Can Be Used As 16-bit Counters
- ESD and Surge Protection
- Configurable Power-on Value and Safe Value Settings
- DIN-Rail Mountable
Introduction
The ZT-2060 offers 4 Form A power relay output channels and 6 digital input channels, each of which features photocouple isolation. In addition, you can choose sink-type or source-type input via wire connections. Digital input channels are able to be used as 16-bit counters and Relay channels are options for configuring power-on and safe digital output values The ZT-2060 has 10 LED indicators to display the channel status, and has 4 kV ESD protection and 3000 VDC intra-module isolation. Users can easily configure the module address, protocol, checksum, ZB-PID and ZB-channel settings using a combination of rotary and DIP switches.
Application

I/O Specification
| Digital Input | ||
| Input Channels | 6 | |
| Types | Wet Contact (Sink/Source) | |
| On Voltage Level | +3.5 VDC ~ +30 VDC | |
| Off Voltage Level | Max. +1 VDC | |
| Input Impedance | 3 kΩ, 0.33 W | |
| Counter | Channels | 6 |
| Max. Count | 16-bit (65535) | |
| Max. Input Frequency | 100 Hz | |
| Min. Pulse Width | 5 ms | |
| Relay Output | ||
| Output Channels | 4 | |
| Types | Power Relay, Form A (SPST N.O) | |
| Contact Rating | 5 A @ (250 VAC/30 VDC) | |
| Max. Contact Voltage | 270 VAC/125 VDC | |
| Operate Time | 10 ms | |
| Release Time | 5 ms | |
| Mechanical Endurance | 2 x 107 ops at no load (300 ops/minute) | |
| Electrical Endurance | 105 ops | |
| Surge Strength | 3000 VDC | |
| Power-on Value | Yes, Programmable | |
| Safe Value | Yes, Programmable | |
System Specification
| Communication Interface | ||
| Wireless Standards | ZigBee 2007 Pro | |
| Transmission Power | 11 dBm (FCC Certificated) | |
| 2.4 GHz Antenna | 5 dBi Omni directional | |
| Transmission Range (LoS) | 700 m (Typical) | |
| Certification | FCC/FCC ID, CE (RED excluded) | |
| Max. Slaves in a ZigBee Network | 255 | |
| Protocols | Supports DCON and Modbus RTU Protocols | |
| Dual Watchdog | Yes, Module (1.6 Seconds), Communication (Programmable) | |
| LED Indicators | ||
| Power | 1 LED, Red | |
| ZigBee Communication | 1 LED, Green | |
| Digital Input and Output | 6 Green LEDs for Digital Input 4 Red LEDs for Relay Output |
|
| Isolation | ||
| Intra-module Isolated, Field-to-Logic |
2500 VDC | |
| EMS Protection | ||
| ESD (IEC 61000-4-2) | 4 kV Contact for Power Line, Communication Line and each Channel, 8 kV Air for Random Point |
|
| EFT (IEC 61000-4-4) | 4 kV for Power Line | |
| Surge (IEC 61000-4-5) | 3 kv for Power Line | |
| Power | ||
| Input Voltage Range | +10 VDC ~ +30 VDC | |
| Power Consumption | Max. 1.4 W | |
| Mechanical | ||
| Flammability | Fire Retardant Materials (UL 94V-0 Level) | |
| Dimensions (L x W x H) | 94 mm x 33 mm x 110 mm | |
| Installation | DIN-Rail | |
| Environment | ||
| Operating Temperature | -25 ~ +75°C | |
| Storage Temperature | -30 ~ +80°C | |
| Relative Humidity | 10 ~ 90% RH, Non-condensing | |
Ordering information
| ZT-2060 CR | Wireless 6-channel Isolated Digital Input and 4-channel Relay Output Module (ZigBee Router) (RoHS) |
| Important Note: ZigBee Data Acquisition modules need a ZigBee host converter to coordinate the data transmission route. Please remember to order a ZT-2550 or ZT-2570 ZigBee host converter when you purchase ZigBee Data Acquisition Products. | |
