Module Zigbee I/O (Pair-connection) 8 kênh đầu vào số + 8 kênh đầu ra số ICP DAS ZT-2055-IOP
Features
- ISM 2.4 GHz Operating Frequency
- Fully Compliant with 2.4G IEEE 802.15.4/ZigBee Specifications
- Wireless Transmission Range up to 700 m (Default)
- Adjustable RF Transmission Output Power
- 8 Channels Pair-connection of the Digital Input and Digital Output
- DO Safe Value setting for Wireless Disconnection Monitoring
- Configurable I/O Pairing Number
- Surge and ESD Protection
- Supports AES-128 Encryption for the Wireless Communication
- DIN-Rail Mountable
Introduction
The ZT-2055-IOP module is a ZigBee coordinator that offers 8 isolated channels for digital input and 8 isolated channels for digital output. An embedded I/O channel binding function means that there is no need to use an external controller.
The status of each channel is bound to a remote channel of the ZT-2055. The ZT-2055-IOP continually updates the status of the DO channel of the remote ZT-2055 based on its own DI channels. It also reads the status of the DI channel of the remote ZT-2055 to synchronize its own DO channels. The ZT-2055-IOP also provides external DIP switches for easy configuration, which can be used to synchronize the digital signals in any difficult wiring environment.
Application

I/O Specification
| Digital Input/Counter | ||
| Input Channels | 8 | |
| Input Types | Dry Contact | Source |
| Wet Contact | Sink/Source | |
| Wet Contact | On Voltage Level | +10 VDC ~ +50 VDC |
| Off Voltage Level | Max. +4 VDC | |
| Dry Contact | On Voltage Level | Close to GND |
| Off Voltage Level | Open | |
| Input Impedance | 10 KΩ | |
| Overvoltage Protection | ±70 VDC | |
| Digital Output | ||
| Output Channels | 8 | |
| Output Types | Open Collector | |
| Sink/Source (NPN/PNP) | Sink | |
| Load Voltage | +3.5 ~ 50 VDC | |
| Max. Load Current | 650 mA/Channel | |
| Overvoltage Protection | 60 VDC | |
| Overload Protection | 1.4 A (with short-circuit protection) | |
System Specification
| Communication Interface | |
| Wireless Standards | ZigBee 2007 Pro |
| Transmission Power | 11 dBm (FCC Certificated) |
| 2.4 GHz Antenna | 5 dBi Omni directional |
| Transmission Range (LoS) | 700 m (Typical) |
| Certification | CE/FCC, FCC ID |
| Max. Slaves in a ZigBee Network | 255 |
| LED Indicators | |
| Power | 1 Red LED, ZigBee Device Power Indicator |
| ZigBee Communication | 1 Green LED, ZigBee Communication Indicator |
| Digital Input and Output | 8 Green LEDs for Digital Input 8 Red LEDs for Digital Output |
| Isolation | |
| Intra-module Isolated, Field-to-Logic | 2500 VDC |
| EMS Protection | |
| ESD (IEC 61000-4-2) | 4 kV Contact for Power Line, Communication Line and each Channel, 8 kV Air for Random Point |
| EFT (IEC 61000-4-4) | 4 kV for Power Line |
| Surge | 3 kV for Power Line |
| Power | |
| Input Voltage Range | +10 VDC ~ +30 VDC |
| Power Consumption | Max. 2.5 W |
| Mechanical | |
| Flammability | Fire Retardant Materials (UL 94V-0 Level) |
| Dimensions (L x W x H) | 96 mm x 33 mm x 110 mm |
| Installation | DIN-Rail |
| Environment | |
| Operating Temperature | -25 ~ +75°C |
| Storage Temperature | -30 ~ +80°C |
| Relative Humidity | 10 ~ 90% RH, Non-condensing |
Ordering information
| ZT-2055-IOP CR | ZigBee I/O Pair-connection Module with the 8-channel Isolated Digital Input and 8-channel Digital Output (Host, ZigBee Coordinator) (RoHS) |
| ZT-2042 CR | ZigBee 4-ch PhotoMOS Relay Output and 4-ch Open Collector Output Module (Slave, ZigBee Router) (RoHS) |
| ZT-2043 CR | ZigBee 14-ch Isolated Digital Output Module (Slave, ZigBee Router) (RoHS) |
| ZT-2055 CR | ZigBee 8-channel Isolated Digital Input and 8-channel Isolated Digital Output Module (Slave, ZigBee Router) (RoHS) |
| ZT-2060 CR | ZigBee 6-ch Isolated Digital Input and 4-ch Relay Output Module (Slave, ZigBee Router) (RoHS) |
| Important Note: ZigBee Pair-connection module is a ZigBee host to coordinate the ZigBee I/O module. Please order at least one ZT-2000 digital series module to work for ZigBee I/O pairing. | |
