Module Zigbee 8 kênh đầu vào số bộ đếm 16 bits ICP DAS ZT-2052
Features
- ISM 2.4 GHz Operating Frequency
- Fully Compliant with 2.4G IEEE 802.15.4 / ZigBee Specifications
- Wireless Transmission Range up to 700 m (Default)
- Adjustable RF Transmission Output Power
- External DIP and Rotary Switches for easy Configuration
- GUI Configuration Software (Windows Version)
- Supports AES-128 Encryption for the Wireless Communication (Passive)
- Supports ZigBee Repeater Function
- 8 Wet Contact Digital Input Channels
- Supports 16-bit Counters for Digital Input Channels
- Surge and ESD Protection
- DIN-Rail Mountable
Introduction
The ZT-2052 offers 8 digital input channels, each of which features photocouple isolation. In addition, you can choose either sink-type or sourcetype input via wire connections. All channels are able to be used as 16-bit counters. The ZT-2052 has 8 LED indicators to display the channel status and also includes 4 kV ESD protection and 3000 VDC intra-module isolation. Users can easily configure the module address, protocol, checksum, ZB-PID and ZB-channel settings using a combination of rotary and DIP switches.
Application

I/O Specification
| Digital Input | ||
| Input Channels | 8 | |
| Wet Contact (Sink/Source) |
On Voltage Level | +3.5 VDC ~ +30 VDC |
| Off Voltage Level | Max. 1 VDC | |
| Input Impedance | 3 kΩ, 0.33 W | |
| Counter | Channels | 8 |
| Max. Count | 16-bit (65535) | |
| Max. Input Frequency | 100 Hz | |
| Min. Pulse Width | 5 ms | |
| ESD Protection | +/-4 kV contact for each channel | |
System Specification
| Communication Interface | |
| Wireless Standards | ZigBee , IEEE 802.15.4 |
| Transmission Power | 11 dBm |
| 2.4 GHz Antenna | 5 dBi Omni directional |
| Transmission Range (LoS) | 700 m (Typical) |
| Certification | FCC/FCC ID, CE (RED excluded) |
| Max. Slaves in a ZigBee Network | 255 |
| Protocols | Supports DCON and Modbus RTU Protocols |
| LED Indicators | |
| Power | 1 LED, Red |
| ZigBee Communication | 1 LED, Green |
| Digital Input | 8 LEDs, Green |
| Isolation | |
| Intra-module Isolated, Field-to-Logic |
3000 Vrms |
| Power | |
| Input Voltage Range | +10 VDC ~ +30 VDC |
| Power Consumption | Max. 1 W |
| Mechanical | |
| Flammability | Fire Retardant Materials (UL 94V-0 Level) |
| Dimensions (L x W x H) | 88 mm x 33 mm x 110 mm |
| Installation | DIN-Rail |
| Environment | |
| Operating Temperature | -25 ~ +75°C |
| Storage Temperature | -30 ~ +80°C |
| Relative Humidity | 10 ~ 90% RH, Non-condensing |
Ordering information
| ZT-2052 CR | Wireless 8-channel Isolated Digital Input Module with 16-bit Counters (RoHS) |
| Important Note: ZigBee Data Acquisition modules need a ZigBee host converter to coordinate the data transmission route. Please remember to order a ZT-2550 or ZT-2570 ZigBee host converter when you purchase ZigBee Data Acquisition Products. | |
