Card PCI 2 cổng truyền thông RS-422/485 ICP DAS VXC-142AU
Features
- Supports 3.3 V/5 V PCI bus, Plug and Play for VXC-142(i)AU
- Supports PCI Express, Plug and Play for VEX-142(i)
- Provides 2 RS-422/485 ports
- Built-in COM-Selector
- +/-4 kV ESD Protection for i versions
- 2500 VDC Isolation for i versions
- 128 KB Software Buffer (max.) for Each COM Port Under Windows
- 128-byte Hardware FIFO for Each Port
- Short Card Design
Introduction
The VXC/VEX-142 series card provides two RS-422/RS-485 serial ports. Each port can be configured as either RS-485 for half-duplex or RS-422 for full-duplex communication. It supports for speed up to 115200 bps and supports full-duplex communication.
Users may specify a COM port number manually by setting dip switch, or let the driver choose an available number automatically. The driver provides a maximum of 128 KB software FIFO for each COM port under Windows. It’s practical for large file transmission.
The data lines of each serial ports on i version VXC/VEX cards come with photocouplers design. The on-board photo couplers use a short optical transmission path to transfer a signal between elements of a circuit, and keep the data lines electrically isolated. It can help cutting down on ground loops, common mode voltages and block voltage spikes, provide electrical isolation, and offer significant protection from serious over-voltage conditions in one circuit affecting the other.
Software
- Windows NT4/2000 drivers for VXC series.
- Drivers for 32-bit Windows XP/2003/2008/7/8/10
- Drivers for 64-bit Windows XP/2003/2008/7/8/10
- Driver for Linux
Application
- Industrial Machinery
- Building Automation
- Restaurant Appliances
- Laboratory Equipment & Research
- Industrial Communication
Specification
| Models | VXC-142AU | VXC-142iAU | VEX-142 | VEX-142i | ||
| Communication Port | ||||||
| COM1 ~ COM2 | RS-422/485 | The RS-422 and RS-485 cannot be used simultaneously | ||||
| RS-422 | TxD+, TxD-, RxD+, RxD-, RTS+, RTS-, CTS+, CTS-, GND | |||||
| RS-485 | 2-Wire | Data+, Data-, GND | ||||
| Bias Resistor | Yes, 1 KΩ | |||||
| Node | 256 (max.) | |||||
| UART | 16C950 compatible | |||||
| Baud Rate | 50 – 115200 bps | |||||
| Data bit | 5, 6, 7, 8 | |||||
| Stop bit | 1, 1.5, 2 | |||||
| Parity | None, Even, Odd, Mark, Space | |||||
| FIFO | Internal 128 bytes | |||||
| Isolated | – | 2500 VDC | – | 2500 VDC | ||
| General | ||||||
| Bus Type | Universal PCI, 3.3 V and 5 V, 33 MHz, 32-bit, Plug and Play | PCI Express x1, Plug and Play | ||||
| COM-Selector | Yes (8-bit DIP switch) | |||||
| Connector | 2 x DB9 (Male) | |||||
| Power Consumption | 100 mA @ 5 V | 480 mA @ 5 V | 120 mA @ 5 V | 440 mA @ 5 V | ||
| Operating Temperature | 0 °C ~ +60 °C | |||||
| Storage Temperature | -20 °C ~ +70 °C | |||||
| Humidity | 0 ~ 90% RH, non-condensing | |||||
| Dimensions (L x W x D) | 134 mm x 90 mm x 22 mm | 110 mm x 94 mm x 22 mm | ||||
Ordering information
| PCI Express Bus | |
| VEX-142 CR | PCI Express Bus, Serial Communication Board with 2 RS-422/485 ports (RoHS) |
| VEX-142i CR | PCI Express Bus, Serial Communication Board with 2 Isolated RS-422/485 ports (RoHS) |
| Universal PCI Bus | |
| VXC-142AU CR | Universal PCI Bus, Serial Communication Board with 2 RS-422/485 ports (RoHS) |
| VXC-142iAU CR | Universal PCI Bus, Serial Communication Board with 2 Isolated RS-422/485 ports (RoHS) |