Module USB 8 kênh đầu ra Relay ICP DAS USB-2064
Introduction
The USB-2064 is a full-speed USB device with 8-channel power relay output module, and offers features for industrial control and manufacturing test applications, such as factory automation or embedded machine control. The USB-2064 provides a power rated relay with 5A maximum current contact rating for switching. Besides, the USB-2064 also features power-on value to customize the initial state. Moreover, the safety value can be used to secure the devices in the field. With the true Plug & Play capability, it needs not opening up your computer chassis to install boards-just plug in the module, then get or set the data. Owing to another USB feature known as “hot-swapping”, users do not even need to shut down and restart the system to attach or remove the USB-2064.
The USB I/O utility can help users to configure and test USB-2064 quickly and easily without programming; In addition, we also provide the friendly API library and demos for users to develop own USB application with various application development tools (VB / C++ / C#.NET / VB.NET). Therefore, the USB-2064 is the perfect way to add control capability to any USB capable computer.
Features
- 8-channel power relay output
- 5A maximum current contact rating
- Safety functionality when communication failed
- Wide operating temperature range
- 2500 VDC Intra-Module isolation
- USB 2.0 Full-Speed
- USB Bus Powered
- Plug-and-Play without driver
- Lockable USB cable
- PWR / RUN / ERR LED indicators
Application
- 8-channel power relay output
- 5A maximum current contact rating
- Safety functionality when communication failed
- Wide operating temperature range
- 2500 VDC Intra-Module isolation
- USB 2.0 Full-Speed
- USB Bus Powered
- Plug-and-Play without driver
- Lockable USB cable
- PWR / RUN / ERR LED indicators
Software
USB I/O Utility
USB I/O Utility provides a simple way to easily test and instant acquire data for all ICP DAS USB I/O series modules without programming.
- Automatically scan all ICP DAS USB I/O modules
- Easily and quickly configure and test USB I/O modules
- Completely and precisely log I/O data for analysis
VB/C++/C#.NET/VB.NET SDK
ICP DAS provides a SDK for USB I/O modules to help user to develop own project easily and quickly. The SDK can be supported in VB/C++/C#.NET/VB.NET to fulfill project development.
Specification
| Output | ||
| Channels | 8 | |
| Output Type | Form A (SPST-NO) | |
| Contact Rating (Resistive Load) | 5 A 250 VAC (47 ~ 63 Hz) 5 A 30 VDC |
|
| Operate Time | 10ms max. | |
| Release Time | 5ms max. | |
| Insulation Resistance | 1,000 MΩs at 500 VDC | |
| Dielectric Strength | Between Open Contact | 1000 VAC (1 min.) |
| Between Coil and Contacts | 3000 VAC (1 min.) | |
| Endurance | Mechanical | 20,000,000 times min. |
| Electrical | 100,000 times min. | |
| Communication | ||
| Interface | USB 2.0 Full-Speed | |
| Watchdog | 1 Hardware watchdog (1.6 second) | |
| 1 Software watchdog (Programmable) | ||
| LED Indicators | ||
| System LED Indicators | 3 LED as Power, Run and Error | |
| I/O LED indicators | 8 LEDs as power relay indicators | |
| EMS Protection | ||
| ESD (IEC 61000-4-2) | 4 kV contact for each terminal | |
| 8 kV air for random point | ||
| Mechanical | ||
| Dimensions (W × L × H) | 33 mm × 102 mm × 107 mm | |
| Environmental | ||
| Operating Temperature | -25 ~ +75 °C | |
| Storage Temperature | -40 ~ +85 °C | |
| Humidity | 10 ~ 95% RH, non-condensing | |
| Power | ||
| Power Consumption | 1.40 W max. | |
Ordering information
| USB-2064 CR | 8-channel Power Relay Output Module (RoHS) |