Module USB 6 kênh đầu vào số + 6 kênh đầu ra Relay cách ly ICP DAS USB-2060
Introduction
The USB-2060 is a full-speed USB device with 8 digital input and digital output channels module, and offers features for industrial control and manufacturing test applications, such as factory automation or embedded machine control. The USB-2060 provides 6 digital input channels, 6 Form A signal relay output channels. All digital input channels can be used as 16-bit counters. In addition, the digital input channels can be selected either as sink or source type via wire connections. The USB-2060 also provides 12 LED indicators that can be used to monitor the status of the digital input and relay output. There are also options for configuring power-on and safe values. 4 kV ESD protection and 3750 VDC intra-module isolation are also provided to enhance noise protection capabilities in industrial environments. With the true Plug & Play capability, it needs not opening up your computer chassis to install boards-just plug in the module, then get or set the data. Owing to another USB feature known as “hot-swapping”, users do not even need to shut down and restart the system to attach or remove the USB-2060.
The USB I/O utility can help users to configure and test USB-2060 quickly and easily without programming; In addition, we also provide the friendly API library and demos for users to develop own USB application with various application development tools (VB/C++/C#.NET/VB.NET). Therefore, the USB-2060 is the perfect way to add control capability to any USB capable computer.
Features
- 6-channel digital input and 6-channel relay output
- Dry Contact and Wet Contact Selectable via Wire Connections
- Long Distance Measurement
- All Channels can be used as 16-bit Counters
- 5A current contact rating
- Configurable Power-on Value Settings
- Safety functionality when communication failed
- Wide operating temperature range:-25°C~+75°C
- 2500 VDC Intra-Module isolation
- RoHS compliant
- USB 1.1/2.0 Full-Speed
- No external power supply (USB Bus Powered)
- Plug-and-Play without driver
- Lockable USB cable
- Support firmware update via USB
- Utility tool for module configuration and I/O testing easily and quickly
- PWR/RUN/ERR LED indicators
- Built-in dual watchdog (hardware/software)
- Provide API library (VC/VB/BCB/.NET)
- Module supported for Win2000/XP and Win7 (32/64 bit)
Application
- Building automation
- Factory automation
- Machine automation
- Testing equipment
Software
USB I/O Utility
USB I/O Utility provides a simple way to easily test and instant acquire data for all ICP DAS USB I/O series modules without programming.
- Automatically scan all ICP DAS USB I/O modules
- Easily and quickly configure and test USB I/O modules
- Completely and precisely log I/O data for analysis
VB/C++/C#.NET/VB.NET SDK
ICP DAS provides a SDK for USB I/O modules to help user to develop own project easily and quickly. The SDK can be supported in VB/C++/C#.NET/VB.NET to fulfill project development.
Specification
| Digital Input | ||
| Channels | 6 | |
| Type | Dry Contact | Source |
| Wet Contact | Sink/Source | |
| On Voltage Level | Dry Contact | Close to GND |
| Wet Contact | +10 VDC ~ +50 VDC | |
| Off Voltage Level | Dry Contact | Open |
| Wet Contact | +4 VDC Max. | |
| Effective Distance For Dry Contact | 500 meters Max. | |
| Input Impedance | 10 KΩ | |
| Overvoltage Protection | 70 VDC | |
| Counter | Max. Count | 65535 (16-bit) |
| Max. Input Frequency | 500 Hz | |
| Min. Pulse Width | 1 ms | |
| Relay Output | ||
| Channels | 6 | |
| Type | Form A (SPST-NO) | |
| Contact Rating (Resistive Load) | DC | 5 A @ 24 VDC |
| AC | 5 A @ 250 VAC (47 ~ 63 Hz) | |
| Operate Time | 10 ms (Max.) | |
| Release Time | 5 ms (Max.) | |
| Insulation Resistance | 1,000 MΩs at 500 VDC | |
| Dielectric Strength | Between Open Contact | 1000 VAC (1 min.) |
| Between Coil and Contacts | 3000 VAC (1 min.) | |
| Enduranc | Mechanical | 2 x 107 ops |
| Electrical | 1 x 105 ops | |
| Power On Value | Yes | |
| Safety Value | Yes | |
| Communication | ||
| Interface | USB 2.0 Full-Speed | |
| Watchdog | 1 Hardware watchdog (1.6 second) | |
| 1 Software watchdog (Programmable) | ||
| LED Indicators | ||
| System LED Indicators | 3 LED as Power, Run and Error | |
| I/O LED indicators | 8 LEDs as power relay indicators | |
| EMS Protection | ||
| ESD (IEC 61000-4-2) | 4 kV contact for each terminal | |
| 8 kV air for random point | ||
| Mechanical | ||
| Dimensions (W x L x H) | 72 mm x 123 mm x 35 mm | |
| Environmental | ||
| Operating Temperature | -25 ~ +75 °C | |
| Storage Temperature | -40 ~ +85 °C | |
| Humidity | 10 ~ 95% RH, non-condensing | |
| Power | ||
| Power Consumption | 1.50 W | |
Order information
| USB-2060 CR | 6-channel Isolated Digital Input and 6-channel Relay Output Module (RoHS) |