Module OPC UA & MQTT 8 kênh đầu vào số DI + 8 kênh đầu ra số DO 2 cổng Ethernet ICP DAS U-7555M CR
Features
• Support OPC UA Server and MQTT Client Protocol
• Support RESTful API via HTTP and HTTPS
• Support to Execute OPC UA, MQTT and RESTful API Simultaneously
• Support Logic Function Rule Setting: IF, THEN, ELSE
• Support Schedule: to Execute the Set Tules at a Specific Time.
• Support Event Log: Record the I/O Change for Device Tracking
• Built-in Web Server to Provide the Web User Interface
• Built-in I/O Channels (8 x DI and 8 x DO)
• Dual-port Ethernet Switch for Daisy-Chain Topology
• IEEE 802.3af-compliant Power over Ethernet (PoE)
Introduction
U-7555M is an OPC UA I/O module that provides 8 digital input channels and 8 digital output channels. It has a built-in dual-port Ethernet switch to implement daisy-chain topology. The cabling is much easy and can reduce the total cable and switch cost. U-7555M follows IEEE 802.3af (Class 2) compliant Power over Ethernet (PoE) specification. It allows receiving power from PoE enabled network by Ethernet pairs. This feature provides greater flexibility and efficiency to simplify system design, save space, and reduce wirings and power sockets. It provides a Web UI to confi gure/control/monitor the modules, connections, and I/O status via a web browser. It is easy, fast, and no extra APP needed.
In industrial communication, UA I/O provides OPC UA Server, MQTT Client and RESTful API protocols (can execute all communications at the same time.). Users can choose the networking mode according to their cases. And to transmit the values of the built-in I/O channels to the Cloud IT system or field control system for reading and writing. Support logic function Rule Setting IF, THEN, ELSE, can set up logical condition/action for I/O and virtual point; Provide schedule function to execute the set rules at a specifi c time; support RESTful API function, can read/write I/O and virtual point through HTTP or HTTPS.
| Software | |
|---|---|
| Protocol | 1. OPC UA Server • OPC Unified Architecture: 1.02 • Core Server Facet • Data Access Server Facet • Method Server Facet • UA-TCP UA-SC UA Binary • User Authentication: Anonymous, Username/Password, X.509 Certificate • Security Policy: None, Basic128Rsa15 (Sign, Sign & Encrypt), Basic256 (Sign, Sign & Encrypt) • Recommend to keep the max. number of sessions within 3 connections. • Can Execute with MQTT Communication Simultaneously2. MQTT Client • Connect to the MQTT Broker to read or control the I/O channel value by the publish/subscribe messaging mechanism. (MQTT Ver. 3.1.1; TLS Ver. 1.2) • Can Execute with OPC UA Communication Simultaneously 3. RESTful API |
| Function | 1. Web Interface for Confi guration • The system operation can be performed through the browser without installing software tools. • Use AES 256 encryption algorithm to encrypt web page setting data for general communication. • HTTPS upgrades the security of web communication.2. Scaling • Convert the analog signal to a more readable value. • Function is only available for modules with AI/O. 3. Security 4. Rule Setting 5. Schedule 6. Event Log |
| CPU Module | |
|---|---|
| CPU | 32-bit CPU (400 MHz) |
| Isolation | |
|---|---|
| Intra-module Isolation | 2500 VDC |
| EMS Protection | |
|---|---|
| EFT (IEC 61000-4-4) | ±2 kV for Power Line |
| ESD (IEC 61000-4-2) | ±4 kV Contact for each terminal and ±8 kV Air for random point |
| Surge (IEC 61000-4-5) | ±2 kV for Power Line |
| LED Indicators | |
|---|---|
| Status | 1 x PoE Power 1 x System Running 1 x Ethernet Link/Act 16 x I/O Channel Status |
| Digital Input/Counter | |
|---|---|
| Channels | 8 |
| Type | Dry + Wet Contact |
| Sink/Source (NPN/PNP) | Dry: Source Wet: Sink/Source |
| ON Voltage Level | Dry: Close to GND Wet: +10 VDC ~ +50 VDC |
| OFF Voltage Level | Dry: Open Wet: +4 VDC Max. |
| Max. Counts | 16-bit (65535) |
| Frequency | 50 Hz |
| Min. Pulse Width | 10 ms |
| Effective Distance | 500 M Max. |
| Input Impedance | 10 kΩ |
| Overvoltage Protection | +70 VDC |
| Digital Output | |
|---|---|
| Channels | 8 |
| Type | Isolated Open Collector |
| Sink/Source (NPN/PNP) | Source |
| Load Voltage | +10 VDC ~ +40 VDC |
| Load Current | 650 mA/Channel at 25°C |
| Overvoltage Protection | 47 VDC |
| Short-circuit Protection | Yes |
| Ethernet | |
|---|---|
| Ports | RJ-45 x 2, 10/100 Base-TX, Swtich Ports (LED indicators) |
| PoE | Yes |
| Power | |
|---|---|
| Reverse Polarity Protection | Yes |
| Input Range | 12 ~ 48 VDC |
| Consumption | 3.7 W |
| Powered from PoE | Yes, IEEE 802.3af, Class 2 |
| Powered from Terminal Block | Yes, 12 ~ 48 VDC |
| Mechanical | |
|---|---|
| Dimensions (mm) | 97 x 120 x 42 (W x L x H) |
| Installation | Wall Mounting |
| Environment | |
|---|---|
| Operating Temperature | -25 ~ +75 °C |
| Storage Temperature | -30 ~ +80 °C |
| Humidity | 10 ~ 90% RH, Non-condensing |
Ordering Information
| U-7555M CR | OPC UA I/O Module with 8-ch DI, 8-ch DO and 2-port Ethernet Switch. (RoHS) |
