Nguồn tổ ong DC/DC 150W từ 9VDC~ 132VDC ra 1 kênh 5V- 12V-24V Leyu SD-150
Thông số kĩ thuật
| SPECIFICATION | |||||||||||||||||
| OUTPUT | |||||||||||||||||
| Model |
SD-150A-5 |
SD-150B-5 |
SD-150C-5 |
SD-150B-12 |
SD-150C-12 |
SD-150D-12 |
SD-150B-24 |
SD-150C-24 |
SD-150D-24 |
||||||||
| DC Voltage |
5V |
12V |
24V |
||||||||||||||
| Rated Current |
30A |
12.5A |
6.5A |
||||||||||||||
| Current Range |
0-30A |
0 ~ 12.5A |
0 ~ 6.5A |
||||||||||||||
| Rated Power |
150W |
150W |
156W |
||||||||||||||
| Ripple & Noise |
120mVp-p |
120mVp-p |
150mVp-p |
||||||||||||||
| Voltage Adj. Range |
4.5~5.5VDC |
11 ~ 16VDC |
21.6 ~ 26.4VDC |
||||||||||||||
| Voltage Tolerance |
±1.0% |
±1.0% |
±1.0% |
||||||||||||||
| Line Regulation |
±0.5% |
±0.5% |
±0.3% |
||||||||||||||
| Load Regulation |
±0.5% |
±0.5% |
±0.3% |
||||||||||||||
| Setup, Rise Time | 2s, 50ms at full load | ||||||||||||||||
| Hold Up Time | 24ms(only D mode) at full load | ||||||||||||||||
| INPUT | |||||||||||||||||
| Voltage Range | A:9.2~18VDC B:19 ~ 36VDC C:36 ~ 72VDC D:72 ~144VDC or 85 ~ 132VAC | ||||||||||||||||
| Efficiency |
70% |
73% |
76% |
75% |
77% |
79% |
77% |
80% |
82% |
||||||||
| DC Current |
6.8A/24V |
3.4A/48V |
2.7A/96V |
6.8A/24V |
3.4A/48V |
2.7A/96V |
6.8A/24V |
3.4A/48V |
2.7A/96V |
||||||||
| Inrush Current | D:22.5A/96VDC | ||||||||||||||||
| Leakage Current | <0.75mA / 120VAC (SD-150D) | ||||||||||||||||
| PROTECTION | |||||||||||||||||
| Over Load
|
105 ~ 135% rated output power | ||||||||||||||||
| Protection type: Hiccup mode, recovers automatically after fault condition is removed | |||||||||||||||||
| Over Voltage |
16.8V ~ 20V/10% LOAD |
31.5 ~ 37.5V/10% LOAD |
|||||||||||||||
| Protection type: Hiccup mode, recovers automatically after fault condition is removed | |||||||||||||||||
| ENVIRONMENT | |||||||||||||||||
| Working Temp. | -10 ~ +60℃(Refer to “Derating Curve”) | ||||||||||||||||
| Working Humidity | 20 ~ 90% RH non-condensing | ||||||||||||||||
| Storage Temp., Humidity | -20 ~ +85℃, 10 ~ 95%RH | ||||||||||||||||
| Temp. Coefficient | ±0.03%/℃ (0 ~ 50℃) | ||||||||||||||||
| Vibration | 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes | ||||||||||||||||
| SAFETY & EMC | |||||||||||||||||
| Safety Standards | IEC60950-1 CB approved by TUV (for D type only) | ||||||||||||||||
| Withstand Voltage | I/P-O/P: 1.5KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC | ||||||||||||||||
| Isolation Resistance | I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25℃ / 70% RH | ||||||||||||||||
| EMC Emission | Compliance to EN55022 (CISPR22) Class B | ||||||||||||||||
| EMC Immunity | Compliance to EN61000-4-2,3,4,6,8, light industry level, criteria A | ||||||||||||||||
| OTHERS | |||||||||||||||||
| Dimension | 199*110*50mm (L*W*H) | ||||||||||||||||
| Weight | 0.86Kg | ||||||||||||||||
| Packing | 16pcs/14.5Kg/0.95CUFT | ||||||||||||||||
| NOTE | |||||||||||||||||
| 1. All parameters NOT specially mentioned are measured at 24,48,96VDC input, rated load and 25℃ of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12” twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance: includes set up tolerance, line regulation and load regulation. 4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meetsEMC directives. |
|||||||||||||||||