Card PCI 8 kênh đầu vào số (DI) + 8 kênh đầu ra Relay ICP DAS PISO-P8R8U
Features
- Support the +3.3 V/+5 V PCI bus
- Card ID function
- 8 relay output channels
- 8 optically isolated digital input channels
- Selectable DC signal input filter
- AC Signal input with filter
- Onboard relay output status LED indicators
- Supports Plug & Play to obtain I/O resources
- No more manually settings of I/O address and IRQ
Introduction
The PISO-P8R8U card is the new generation product that ICP DAS provides to meet RoHS compliance requirement. The new PISO-P8R8U card is designed as a drop-in replacement for the PISO-P8R8, and users can replace the PISO-P8R8 by the PISO-P8R8U directly without software/driver modification.
The PISO-P8R8U universal PCI card supports 3.3 V/5 V PCI bus while the PISO-P8R8 supports 5 V PCI bus. These cards provide 8-channel optically isolated DI and an 8-channel electromechanical relay output board. These DI channels provide 3750 Vrms isolation protection that allows the input signals to be completely floated so as to prevent ground loops and isolate the host computer from damaging voltages. Relays are used where necessary to control a circuit using a low-power signal (with complete electrical isolation between the control and controlled circuits), or where several circuits must be controlled using one signal. The PISO-P8R8/P8R8U can be used in varous applications, such as controlling the ON/OFF state of external devices, driving external relays or small power switches, activating alarms, contact closure, sensing external voltages or switches, etc. These cards contain a single DB-37 connector for easy wiring.
The PISO-P8R8U also adds a Card ID switch on-board. Users can set Card ID and then recognize the board by the ID via software when using two or more PIO-P8R8U cards in one computer.
These cards support various OS versions, such as Linux, DOS, Windows 98/NT/2000 and 32/64-bit Windows 10/8/7/XP. DLL and Active X control together with various language sample programs based on Turbo C++, Borland C++, Microsoft C++, Visual C++, Borland Delphi, Borland C++ Builder, Visual Basic, C#.NET, Visual Basic.NET and LabVIEW are provided in order to help users quickly and easily develop their own applications.
Application
- Factory automation
- Product test
- Laboratory automation
Software
- DOS Lib and TC sample program (with source codes)
- DLL and OCX SDK for Windows 95/98/NT/2K.
- DLL and OCX SDK for 32-bit and 64-bit Windows XP/2003/2008/7/8/10.
- VB/VC/Delphi/BCB/VB.NET/C#.NET/VC.NET/MATLAB sample programs with source codes are included.
- LabVIEW toolkit for Windows.
- Driver for Linux.
Specifications
| Model Name | PISO-P8R8U | |
| Digital Input | ||
| Isolation Voltage | 5000 Vrms (Photo-couple) | |
| Channels | 8 | |
| Input Voltage | Logic 1:AC/DC 5 ~ 24 V(AC 50 ~ 1 kHz) Logic 0: AC/DC 0 ~ 1 V | |
| Input Impedance | 1.2 KΩ, 0.5 W | 1.2 KΩ, 1 W |
| Response Speed | Without Filter: 50 kHz (Typical) With Filter: 0.455 kHz(Typical) | |
| Relay Output | ||
| Channels | 8 | |
| Relay Type | SPST N.O.(Form A) | |
| Contact Rating | AC: 250 V@1.6 A DC: 30 V@5 A | |
| Operate Time | 6 ms (typical) | |
| Release Time | 3 ms (typical) | |
| Insulation Resistance | 1000 MΩ @ 500 VDC | |
| Life | Mechanical: 2,000,000 ops. Electrical: 100,000 ops. | |
| General | ||
| Bus Type | 5 V PCI, 32-bit, 33 MHz | 3.3 V/5 V Universal PCI, 32-bit, 33 MHz |
| Data Bus | 8-bit | |
| Card ID | No | Yes (4-bit) |
| I/O Connector | Female DB37 x 1 | |
| Dimensions (L x W x D) | 149 mm x 105 mm x 22 mm | |
| Power Consumption | 300 mA @ +5 V | |
| Operating Temperature | 0 ~ 60 °C | |
| Storage Temperature | -20 ~ 70 °C | |
| Humidity | 5 ~ 85% RH, non-condensing | |
Ordering information
Includes one CA-4002 D-Sub connector. | |
Includes one CA-4002 D-Sub connector. | |
| PISO-P8R8U CR | Universal PCI, 8-channel Relay Output with isolated digital input Board (RoHS) Includes one CA-4002 D-Sub connector. |
Accessories
| CA-3710 | DB-37 Male-Male D-sub cable 1 M (Cable for Daughter Board(45°)) |
| CA-3710D | DB-37 Male-Male D-sub cable 1M (Cable for Daughter Board(180°)) |
| CA-3715DM-H | DB-37 Male-Male Cable, 1.5 M, 180°. (RoHS) |
| CA-3730DM-H | DB-37 Male-Male Cable, 3.0 M, 180°. (RoHS) |
| CA-3750DM | DB-37 Male-Male Cable, 5.0 M, 180°. (RoHS) |
| CA-3750DM-H | DB-37 Male-Male Cable, 5.0 M, 180°. (RoHS) |
| CA-4002 | 37-pin Male D-sub connector with plastic cover. |
| CA-4037B | 40-pin flat & D-sub 37-pin Female cable 24 cm. |
| DB-37 | Directly connect signal to D-sub 37-pin connector |
| DN-37 | DIN Rail Mounting 37-pin Connector |
Related Products
I/O Card Main Page