Bảng mạch PCI 32 kênh vào ra số cách ly quang (Sink, NPN) ICP DAS PISO-P32S32WU
Features
- 32-CH optical-isolated digital input
- 32-CH optical-isolated digital output
- Isolation Voltage: 3750 Vrms (Using external power)
- Card ID: Jumper setting for multi-board identification
(Version 1.5 or above) - Open Collector: 500 mA (8-channel), 100 mA (24-channel), Current Sinking, NPN
Introduction
PISO-P32S32WU has 32 channels of optical-isolated DI and 32 channels of optical-isolated open-collector output board (8-channel for 500 mA and 24-channel for 100 mA current sinking output, NPN), arranged into four isolated banks. Each input channel use a photo-coupler to isolate the card and computer from external signal. Each digital output offers a NPN transistor and integral suppression diode for inductive load. PISO-P32S32WU requires external power to drive the D/I and D/O ports and supports Card ID (jumper) features for multi-board identification and supports both 5 V and 3.3 V PCI slot.
This interface board is easily installed in any PC. The board interface to field logic signals, eliminating ground-loop problems and isolating the host computer from damaging voltages. PISO-P32S32WU has one 37-pin D-Sub connector and one 40-pin male header. The 40-pin to DB-37 flat cable is used to fix with the case. The user can connect the digital signal through the second D-Sub connector. Each D-Sub connector contains 16 input channels and 16 output channels.
The PISO-P32S32WU supports various OS such as Linux, DOS, Windows 98, Windows 2000, Windows NT, Windows XP 32-Bit, Vista 32-Bit and Windows 7 32-Bit. It also provides the DLL and Active X control, and various language sample programs in Turbo C++, Borland c++, Microsoft C++, Visual C++, Borland Delphi, Borland C++ Builder, Visual Basic, C#.NET, Visual Basic.NET and LabVIEW to help users to quickly and easily develop their applications.
Applications
- Factory automation
- Product test
- Laboratory automation
Software
- DOS Lib and TC/BC/MSC sample program (with source codes)
- DLL and OCX SDK for Windows 95/98/NT/2K.
- DLL and OCX SDK for 32-bit and 64-bit Windows XP/2003/2008/7/8/10.
- VB/VC/Delphi/BCB/VB.NET/C#.NET/VC.NET/MATLAB sample programs with source codes.
- LabVIEW toolkit for Windows.
- Driver for Linux.
Specification
Digital Input | |
Isolation Voltage | 3750 Vrms (Using external power) |
Channels | 32 |
Compatibility | Sink or Source, Photo coupler isolated channel with common power or ground |
Input Voltage | Logic 0: DC 0 ~ 1 V Logic 1: 9 ~ 24 V |
Input Impedance | 3 KΩ, 0.5 W |
Response Speed | 4 kHz (Typical) |
Digital Output | |
Isolation Voltage | 3750 Vrms (Using external power) |
Channels | 32 |
Compatibility | Sink, Open Collector |
Output Capability | 500 mA for one high driving channel @ 100% duty 500 mA for all high driving channels @ 100% duty (The GND pins all must be connected with GND of External Power) |
100 mA for one low driving channel @ 100% duty 100 mA for all low driving channels @ 100% duty (The GND pins all must be connected with GND of External Power) |
|
Response Speed | 4 kHz (Typical) |
General | |
Bus Type | 3.3 V/5 V Universal PCI, 32-bit, 33 MHz |
Data Bus | 8-bit |
Card ID | Yes (4-bit) for version1.5 or above |
I/O Connector | Female DB37 x 1 40-pin Box header x 1 |
Dimensions (L x W x D) | 180 mm x 105 mm x 22 mm |
Power Consumption | 600 mA @ +5 V |
Operating Temperature | 0 ~ 60 °C |
Storage Temperature | -20 ~ 70 °C |
Humidity | 5 ~ 85% RH, non-condensing |
Ordering Information
PISO-P32S32WU CR | Universal PCI, 32-CH Optical-Isolated DI and 32-CH Optical-Isolated Open Collector Output Board (8-Channel for 500 mA and 24-Channel for 100 mA Current Sinking Output, NPN, RoHS) Includes one CA-4037B cable and two CA-4002 D-Sub connectors. |
Accessories
CA-3710 | DB-37 Male-Male D-sub cable 1 M (Cable for Daughter Board(45°)) |
CA-3710D | DB-37 Male-Male D-sub cable 1M (Cable for Daughter Board(180°)) |
CA-3715DM-H | DB-37 Male-Male Cable, 1.5 M, 180°. (RoHS) |
CA-3730DM-H | DB-37 Male-Male Cable, 3.0 M, 180°. (RoHS) |
CA-3750DM | DB-37 Male-Male Cable, 5.0 M, 180°. (RoHS) |
CA-3750DM-H | DB-37 Male-Male Cable, 5.0 M, 180°. (RoHS) |
CA-4002 | 37-pin Male D-sub connector with plastic cover. |
CA-4037W | 40-pin flat & D-sub 37-pin Female cable 24 cm. |
DB-37 | Directly connect signal to D-sub 37-pin connector |
DN-37 | DIN Rail Mounting 37-pin Connector |