Cảm biến phát hiện chuyển động (PIR) 10 m+nhiệt độ + độ ẩm kết nối RS-485 + WiFi Modbus ICP DAS PIR-231-WF
Features
- Adjustable Time-Delay / Lux / Sensitivity (Lux/Sensitivity PIR-230 Only)
- Internal Photosensor for Smart Switch Control
- LED Indicator for PIR/Temperature Sensor
- Temperature Sensor for Measuring Room Temperature
- Suitable as either Temperature or Fire Alarm
- Relay Output Can be Used to Control Light Via the PIR/Temperature Sensor
- Suitable for loads up to 1500 W (Incandescent) and 300 W (Fluorescent)
- Fluorescent (T8) Loading Capability
- Wide range of Communication Interfaces and Protocols
- Compatible with IEEE802.11b/g/n standards (PIR-230/PIR-231 Only)
- Support infrastructure and limit-AP modes for wireless networks (PIR-230-WF/PIR-231-WF Only)
- Ceiling or Surface-Mount Design
Introduction
PIR series modules have the ability to detect infrared waves generated by the human body within a diameter of approximately 8 meters, with a coverage area of 360° for indoor motion detection. The modules can be configured to automatically switch on a light if motion is detected. The modules also contain a temperature and humidity sensor for measuring indoor temperature and humidity, or it can be configured to activate a fire alarm. A wide range of interface connections can be selected to suit individual needs, including RS-485/Ethernet/Wi-Fi, provide support for the DCON and Modbus RTU/TCP protocols, and can be easily integrated into existing HMI/SCADA/central control systems. A free Utility is also included that allows configuration information and data to be displayed in a powerful chart format that can be exported to Microsoft Excel.
The screw-free quick-connect connector and the DIP and rotary switches make the modules easy to install, repair, and maintain. The casing of each module is made from UL94-V2 rated fireproof material, and the white minimalist exterior design ensures that it is easy to match with interior decoration.
Application
- Lighting and exhaust fans in public toilets
- Common lighting in staircases
- Lighting in parking areas
- Garden lights
- Lighting for changing rooms in shops
- Corridor lighting, and many more situations
System Specification
| Model | PIR-230-E | PIR-230-BLE | PIR-230-WF | PIR-231-E | PIR-231-BLE | PIR-231-WF |
| Motion and Occupancy Sensor | ||||||
| Delay Time | Hardware: 8-step Switch-selectable (seconds): 6, 16, 33, 66, 131, 262, 524, 1049 Software: 16-step (seconds): 2, 4, 6, 8, 16, 33, 49, 66, 131, 262, 393, 524, 1049, 2097, 3146, 4194 | |||||
| Lux Control Level | Hardware: 2 mode (Dawn and dust) / Software: 5-step | – | ||||
| Height Detection | 4 m Max. | 10 m Max. | ||||
| Motion Detection Field of View | 360°; 8 m Diameter Max. | |||||
| Occupancy Detection Field of View | – | |||||
| PIR Response Time | 1 second | |||||
| Temperature Sensor | ||||||
| Measurement Range | -40 to +120°C | |||||
| Fire Alarm | 65°C (Programmable) | |||||
| Resolution | 0.01°C | |||||
| Accuracy | ±0.5°C (at 0 to 60°C) | |||||
| Relative Humidity Measurement | ||||||
| Range | 0 to 100% RH | |||||
| Resolution | 0.01% RH | |||||
| Accuracy | ±5% RH | |||||
| Digital Input | ||||||
| Channels | 2 | |||||
| Type | Wet | |||||
| On Voltage Level | 70 to 220 VAC | |||||
| Off Voltage Level | 20 VAC Max. | |||||
| Input Impedance | 68 KΩ, 1 W | |||||
| Relay Output | ||||||
| Channels | 1 | |||||
| Type | Power Relay, Form C | |||||
| Max. Load Current | NO: 10 A @ 250 VAC NC: 6 A @ 250 VAC | |||||
| Load Wattage | Incandescent Bulb: 1500 W Max.; Fluorescent Lamp: 300 W Max. | |||||
| Communication | ||||||
| Node Address | Hardware: 160 to 191 / Software: 1 to 255 | |||||
| Protocol | DCON, Modbus RTU, Modbus TCP | |||||
| Wire Interface | Yes, RS-485 X 1 and Ethernet/PoE X1 | |||||
| Wireless Interface | – | Bluetooth | Wi-Fi | – | Bluetooth | Wi-Fi |
| Standard Supported | – | BT 4.0 | IEEE 802.11 b/g/n | – | BT 4.0 | IEEE 802.11 b/g/n |
| Wireless Mode | – | Slave | Infrastructure/ Limited AP | – | Slave | Infrastructure/ Limited AP |
| Wireless Security | – | AES 128 | WEP, WPA ,WPA2 | – | AES 128 | WEP, WPA ,WPA2 |
| Transmission Range | – | 20 m (LOS) | 50 m (LOS) | – | 20 m (LOS) | 50 m (LOS) |
| LED Indicators | ||||||
| LED Indicators | Yes,1 as Power/Communication Indicator. 1 as Alarm Indicator. | |||||
| EMS Protection | ||||||
| ESD (IEC 61000-4-2) | ±4 kV Contact for each Terminal, ±8 kV Air for Random Point | |||||
| EFT (IEC 61000-4-4) | ±4 kV for Power Line | |||||
| Power Requirements | ||||||
| Power supply | 18 to 48 VDC, PoE | |||||
| Reverse Polarity Protection | Yes | |||||
| Power Consumption | 2 W | 2.5 W | 3 W | 2 W | 2.5 W | 3 W |
| Mechanical | ||||||
| Installation | Ceiling /surface mounted | |||||
| Protection Class | IP20 | |||||
| Dimensions (D x H) | Ø 150 mm x 53 mm | |||||
| Environment | ||||||
| Operating Temperature | 0 to +35°C | |||||
| Storage Temperature | -30 to +80°C | |||||
| Humidity | 10 to 90% RH, Non-condensing | |||||
Ordering information
| PIR-230-E ~ NEW ~ | PIR Motion Sensor (4 m), Temperature and Humidity Sensor Module (Ethernet) |
| PIR-230-BLE ~ Available soon ~ | PIR Motion Sensor (4 m), Temperature and Humidity Sensor Module (Bluetooth) |
| PIR-230-WF ~ NEW ~ | PIR Motion Sensor (4 m), Temperature and Humidity Sensor Module (WiFi) |
| PIR-231-E ~ NEW ~ | PIR Motion Sensor (10 m), Temperature and Humidity Sensor Module (Ethernet) |
| PIR-231-BLE ~ Available soon ~ | PIR Motion Sensor (10 m), Temperature and Humidity Sensor Module (Bluetooth) |
| PIR-231-WF ~ Available soon ~ | PIR Motion Sensor (10 m), Temperature and Humidity Sensor Module (WiFi) |
Accessories
| EWB-C150 | External Wall Box for PIR-200 series |
| CA-RJ45-04 | RJ45 Cable, Male-Female, 30 cm |