Card PCI 48 kênh DIO ICP DAS PIO-D48U
Features
- Support the +5V PCI bus for PIO-D48
- Support the +3.3/+5 V PCI bus for PIO-D48U/D48SU
- Supports PCI Express x 1 for PEX-D48
- 48 channels of digital I/O
- Bi-direction programmable I/O ports under software control
- All I/O lines buffered on the board
- Six 8-bit bi-direction I/O ports
- SMD, short card
- Connects directly to DB-24PR, DB-24PD, DB-24RD, DB-24PRD, DB-16P8R,
DB-24POR, DB-24SSR, DB-24C or any OPTO-22 Compatible daughter boards. - One 32-bit programmable internal timer
- One DB37 connector and one 50-pin box header for PIO-D48U/PEX-D48
- One SCSI II 100-pin connector for PIO-D48SU
- One 16-bit event counter
- Interrupt source: 4-channel
- Card ID function for PIO-D48SU/D48U/PEX-D48
- Pull-up or pull-down resistors on I/O lines
- Emulate two industrial-standard 8255 PPI ports (mode 0)
- Buffer output for higher driving capability
- DIO response time is about 1 μs (1 MHz) for PIO-D48U/D48SU
- DIO response time is about 500 kHz for PEX-D48
- Output status readback
Introduction
The PIO-D48U/D48SU and PEX-D48 is the new generation product that ICP DAS provides to meet RoHS compliance requirement and is designed as completely compatible with the PIO-D48. Users can replace the PIO-D48 by the PIO-D48U/PIO-D48SU/PEX-D48 directly without software/driver modification.
The PIO-D48U/D48SU supports 3.3 V/5 V PCI bus, while the PEX-D48 supports PCI Express bus. These cards provide 48 TTL digital I/O lines, and these lines are grouped into six 8-bit bi-direction ports. Every three 8-bit ports are grouped as port A (PA), port B (PB) and port C (PC) on a connector, and the port C can be split into 2 nibble-wide(4-bit) parts. All ports are configured as inputs upon power-up or reset.
The PIO-D48U/D48SU and PEX-D48 also adds a Card ID switch and pull-high/ pull-low resisters for DI on board. Users can set Card ID on a board and recognize the board by the ID via software when using two or more PIO-D48U/PIO-D48SU/PEX-D48 cards in one computer. The pull-high/ pull-low resisters allow the DI status to be specified when the DI channels are unconnected; the DI status will remain in high or low status other than floating.
These cards support various OS such as Linux, DOS, Windows 98, Windows 2000, Windows NT, 32-/64-bit Windows XP/2003/2008/Vista/7 and Windows 8. It also provides the DLL and Active X control, and various language sample programs in Turbo C++, Borland c++, Microsoft C++, Visual C++, Borland Delphi, Borland C++ Builder, Visual Basic, C#.NET, Visual Basic.NET and LabVIEW to help users to quickly and easily develop their applications.
Software
- DOS Lib and TC sample program (with source codes)
- DLL and OCX SDK for Windows 95/98/NT/2000
- DLL and OCX SDK for 32-bit and 64-bit Windows XP/2003/2008/7/8/10.
- VB/VC/Delphi/BCB/VB.NET/C#.NET/VC.NET/MATLAB sample programs with source codes.
- LabVIEW toolkit for Windows.
- Driver for Linux and DasyLab.
Specifcation
| Model Name | PIO-D48SU | PIO-D48U | PEX-D48 |
| Programmable Digital I/O | |||
| Channels | 48 | ||
| Digital Input | |||
| Compatibility | 5 V/TTL | ||
| Input Voltage | Logic 0: 0.8 V max. Logic 1: 2.0 V min. | ||
| Response Speed | 1 MHz | 500 KHz | |
| Digital Output | |||
| Compatibility | 5 V/TTL | ||
| Output Voltage | Logic 0: 0.4 V max. Logic 1: 2.4 V min. | ||
| Output Capability | Sink: 64 mA @ 0.8 V Source: 32 mA @ 2.0 V | ||
| Response Speed | 1 MHz | 500 KHz | |
| Timer/Counter | |||
| Channels | 2 (Event Timer x 1/32-bit Timer x 1) | ||
| Resolution | 16-bit | ||
| Compatibility | 5 V/TTL | ||
| Reference Clock | Internal: 4 MHz | ||
| General | |||
| Bus Type | 3.3 V/5 V Universal PCI, 32-bit, 33 MHz | PCI Express x 1 | |
| Data Bus | 8-bit | ||
| Card ID | Yes (4-bit) | ||
| I/O Connector | Female SCSI II 100-pin x 1 | Female DB37 x 1 50-pin box header x 1 | |
| Dimensions (L x W x D) | 140 mm x 97 mm x 22 mm | 156 mm x 105 mm x 22 mm | 172 mm x 112 mm x 22 mm |
| Power Consumption | 900 mA @ +5 V | 1500 mA @ +3.3 V 0 mA @ +12 V | |
| Operating Temperature | 0 ~ 60 °C | ||
| Storage Temperature | -20 ~ 70 °C | ||
| Humidity | 5 ~ 85% RH, non-condensing | ||
Ordering information
| PIO-D48 CR | PCI bus 48-channel DIO board (RoHS) |
| PIO-D48U CR | Universal PCI, 48-channel DIO board (RoHS) |
| PEX-D48 CR | PCI Express , 48-channel DIO board (RoHS) |
| PIO-D48SU CR | Universal PCI, 48-channel DIO board (RoHS) |
Accessories
| CA-3710 | DB-37 Male-Male D-sub cable 1 M (Cable for Daughter Board(45°)) |
| CA-3710D | DB-37 Male-Male D-sub cable 1M (Cable for Daughter Board(180°)) |
| CA-3715DM-H | DB-37 Male-Male Cable, 1.5 M, 180°. (RoHS) |
| CA-3730DM-H | DB-37 Male-Male Cable, 3.0 M, 180°. (RoHS) |
| CA-3750DM | DB-37 Male-Male Cable, 5.0 M, 180°. (RoHS) |
| CA-4002 | 37-pin Male D-sub connector with plastic cover. |
| CA-5002 | 50-pin flat cable 20 cm |
| CA-5015 | 50-pin flat cable 1.5 M |
| CA-SCSI100-15 | SCSI II 100-pin & 100-pin Male connector cable 1.5M |
| ADP-37/PCI | 50-pin connector extender to 37-pin connector |
| DB-24P | 24-channel isolated D/I board |
| DB-24R | 24-channel relay board |
| DB-24PR | 24-channel power relay board |
| DB-24POR | 24-channel of PhotoMos Relay output board |
| DB-24SSR | 24-channel of Solid State Relay output board |
| DB-24C | 24-channel of open-collector output board |
| DN-100 | I/O Connector Block with DIN-Rail Mounting and 100-Pin SCSI II Connector |
| DN-100-CA | I/O Connector Block with DIN-Rail Mounting and 100-Pin SCSI II Connector Include one CA-SCSI100-15 cable |
