Card PCI 168 kênh OPTO-22 DIO ICP DAS PIO-D168U
Features
- Support the +5 V PCI bus for PIO-D168
- Support the +3.3 V/+5 V PCI bus for PIO-D168U
- Double side SMT, short card, power saving
- Connect directly to DB-24P,DB-24R, DB-24PR, DB-24SSR, DB-24POR and other OPTO-22 compatible daughter board
- 168 I/O Lines
- Emulate 7 Industrial standard 8255 PPI ports (mode 0)
- Programmable interrupt
- Card ID function for PIO-D168U
- Six 50-pin flat cable connectors & one 37-pin
- D-sub connector
- Output status readback
- DIO response time is about 1 μs (1 MHz)
Introduction
The PIO-D168U card is the new generation product that ICP DAS provides to meet RoHS compliance requirement. The new PIO-D168U card is designed as a drop-in replacement for the PIO-D168, and users can replace the PIO-D168 by the PIO-D168U directly without software/driver modification.
The PIO-D168U universal PCI card supports 3.3 V/5 V PCI bus while the PIO-D168 supports 5 V PCI bus. These cards provide 168 TTL digital I/O lines, and these lines are grouped into eighteen 8-bit bi-direction ports. Every three ports on a connector are grouped and named as port A (PA), port B (PB) and port C (PC) respectively. All ports are configured as inputs upon power-up or reset.
The PIO-D168U also adds a Card ID switch on-board. Users can set Card ID and then recognizes the board by the ID via software when using two or more PIO-D168U cards in one computer.
The PIO-D168/D168U supports various OS such as Linux, DOS, Windows 98/NT/2000 and 32-bit/64-bit Windows XP/2003/Vista/7. It also provides the DLL and Active X control, and various language sample programs in Turbo C++, Borland c++, Microsoft C++, Visual C++, Borland Delphi, Borland C++ Builder, Visual Basic, C#.NET, Visual Basic.NET and LabVIEW to help users to quickly and easily develop their applications.
Software
- DOS Lib and TC sample program (with source codes)
- DLL and OCX SDK for Windows 95/98/NT/2K.
- DLL and OCX SDK for 32-bit and 64-bit Windows XP/2003/2008/7/8/10.
- VB/VC/Delphi/BCB/VB.NET/C#.NET/VC.NET/MATLAB sample programs with source codes.
- LabVIEW toolkit for Windows.
- Driver for Linux and DasyLab.
Specification
| Model Name | PIO-D168U | |
| Programmable Digital I/O | ||
| Channels | 168 | |
| Digital Inputs | ||
| Compatibility | 5 V/TTL | |
| Input Voltage | Logic 0: 0.8 V max. Logic 1: 2.0 V min. |
|
| Response Speed | 1 MHz | |
| Digital Outputs | ||
| Compatibility | 5 V/TTL | |
| Output Voltage | Logic 0: 0.4 V max. Logic 1: 2.4 V min. |
|
| Output Capability | Sink: 64 mA @ 0.8 V Source: 32 mA @ 2.0 V |
|
| Response Speed | 1 MHz | |
| General | ||
| Bus Type | 5 V PCI, 32-bit, 33 MHz | 3.3 V/5 V Universal PCI, 32-bit, 33 MHz |
| Data Bus | 8-bit | |
| Card ID | No | Yes(4-bit) |
| I/O Connector | Female DB37 x 1 50-pin box header x 6 |
|
| Dimensions (L x W x D) | 200 mm x 105 mm x 22 mm | |
| Power Consumption | 1300 mA @ +5 V | |
| Operating Temperature | 0 ~ 60 °C | |
| Storage Temperature | -20 ~ 70 °C | |
| Humidity | 5 ~ 85% RH, non-condensing | |
Ordering information
| PIO-D168U CR | Universal PCI, 168-channel OPTO-22 DIO board (RoHS) |
Accessories
| CA-3710 | DB-37 Male-Male D-sub cable 1 M (Cable for Daughter Board(45°)) |
| CA-3710D | DB-37 Male-Male D-sub cable 1M (Cable for Daughter Board(180°)) |
| CA-3715DM-H | DB-37 Male-Male Cable, 1.5 M, 180°. (RoHS) |
| CA-3730DM-H | DB-37 Male-Male Cable, 3.0 M, 180°. (RoHS) |
| CA-3750DM | DB-37 Male-Male Cable, 5.0 M, 180°. (RoHS) |
| CA-4002 | 37-pin Male D-sub connector with plastic cover. |
| CA-5002 | 50-pin flat cable 20 cm |
| CA-5015 | 50-pin flat cable 1.5 M |
| ADP-37/PCI | 50-pin connector extender to 37-pin connector |
| DB-24PD | 24-channel of isolated D/I board |
| DB-24RD | 24-channel of relay board |
| DB-24PRD | 24-channel of power relay board |
| DB-24POR | 24-channel of PhotoMos Relay output board |
| DB-24SSR | 24-channel of Solid State Relay output board |
| DB-24C | 24-channel of open-collector output board |
| DN-37/DN-37-381 | I/O Connector Block with DIN-Rail Mounting and 37-Pin D-Sub Connector |
| DN-50/DN-50-381 | I/O Connector Block with DIN-Rail Mounting and 50-Pin Header |

