Module Ethernet (PoE) Modbus TCP 8 kênh đầu vào tương tự + 4 kênh đầu ra số ICP DAS PET-7019
Features
- Built-in Web Server
- Web HMI
- Support for both Modbus TCP and Modbus UDP Protocols
- Communication Security
- Dual Watchdog
- Wide Operating Temperature Range: -25 ~ +75°C
- I/O Pair Connection
- Built-in I/O
- AI: 8 Channels with 240 Vrms Overvoltage Protection
- DO: 4 Channels
Introduction
The ET-7019/PET-7019 features an extremely excellent protection mechanism where overvoltage protection is up to 240 Vrms. It has wider input range for voltage compared to ET-7017. ET-7019/PET-7019 measures voltage from +/-15 mV ~ +/-10 V. Its input type also includes current and thermocouple. An intuitive design is built in this model, measuring current or voltage simply by a jumper. An external resistor is no longer needed. Eight of its inputs channels can individually be configured with different kinds of analog input. Moreover, the ET-7019/PET-7019 also got open thermocouple detection and many protection mechanisms. The 4 digital output can be set as alarm output with Short-circuit protection and overload protection.
System Specification
| Models | ET-7019 | PET-7019 |
| Software | ||
| Built-In Web Server | Yes | |
| Web HMI | Yes | |
| I/O Pair Connection | Yes | |
| Communication | ||
| Ethernet Port | 10/100 Base-TX with Auto MDI/MDI-X | |
| PoE | – | Yes |
| Protocol | Modbus TCP, Modbus UDP | |
| Security | ID, Password and IP Filter | |
| Dual Watchdog | Yes, Module (0.8 seconds), Communication (Programmable) | |
| LED Indicators | ||
| L1 (System Running) | Yes | |
| L2 (Ethernet Link/Act) | Yes | |
| L3 (Ethernet 10/100 M Speed) | Yes | |
| PoE Power | – | Yes |
| 2 Way Isolation | ||
| Ethernet | 1500 VDC | – |
| I/O | 2500 VDC | 2500 VDC |
| EMS Protection | ||
| ESD (IEC 61000-4-2) | 4 kV Contact for Each Terminal and 8 kV Air for Random Point | |
| EFT (IEC 61000-4-4) | +/-4 kV for Power | |
| Power | ||
| Reverse Polarity Protection | Yes | |
| Powered from Terminal Block | Yes, 10 ~ 30 VDC | Yes, 12 ~ 48 VDC |
| Powered from PoE | – | Yes, IEEE 802.3af, Class1 |
| Power Output | – | – |
| Consumption | 2.6 W (Max.) | 2.9 W (Max.) |
| Mechanical | ||
| Dimensions (W x L x H) | 72 mm x 123 mm x 35 mm | |
| Installation | DIN-Rail or Wall mounting | |
| Environmental | ||
| Operating Temperature | -25 ~ +75 °C | |
| Storage Temperature | -30~ +80 °C | |
| Humidity | 10 ~ 90% RH, non-condensing | |
I/O Specification
| Analog Input | ||
| Channels | 8 (Differential) | |
| Sensor Type | +/-15 mV, +/-50 mV, +/-100 mV, +/-150 mV, +/-500 mV, +/-1 V, +/-5 V, +/-10 V, +/-20 mA, 0~20 mA, 4~20 mA | |
| Thermocouple (J, K, T, E, R, S, B, N, C, L, M, , and LDIN43710) | ||
| Strain Gauge Type | Full-Bridge, Half-Bridge, and Quarter-Bridge | |
| Individual Channel Configuration | Yes | |
| Resolution | 16-bit | |
| Sampling Rate | 10 samples/Second total | |
| Accuracy | +/-0.1 % or better | |
| Zero Drift | +/-10 μV/°C | |
| Span Drift | +/-25 ppm/°C | |
| Overvoltage Protection | 240 Vrms | |
| Input Impedance | Voltage | >1 MΩ |
| Current | 125 Ω | |
| Common Mode Rejection | 86 dB Min. | |
| Normal Mode Rejection | 100 dB | |
| Temperature Output Consistency | No | |
| Stable Temperature Output in the Field | No | |
| Open Wire Detection | Yes | |
| Virtual Channel to Channel Isolation | +/-400 VDC | |
| Digital Output | ||
| Channels | 4 | |
| Type | Isolated Open Collector | |
| Sink/Source (NPN/PNP) | Sink | |
| Max. Load Current | 700 mA/Channel | |
| Load Voltage | 5 VDC ~ 50 VDC | |
| Overvoltage Protection | 60 VDC | |
| Overload Protection | 1.4 A | |
| Short-circuit Protection | Yes | |
| Power-on Value | Yes, Programmable | |
| Safe Value | Yes, Programmable | |
| Note: For highly-accurate thermocouple measurement, ICP DAS recommends selecting the ET-7018Z/ET-7019Z module,which features automatic cold-junction compensation for each channel, ensuring consistent and stable temperature output. | ||
Ordering information
| ET-7019 CR | Ethernet I/O Module with 8-ch universal AI, 4-ch DO (RoHS) |
| PET-7019 CR | PoE Ethernet I/O Module with 8-ch universal AI, 4-ch DO (RoHS) |
