Card PCI 12 kênh bộ đếm Timer/tần số 32 kênh điều khiển DIO ICP DAS PCI-FC16U
- Universal PCI Interface supports both the 5 V and the 3.3 V PCI bus
- Supports Card ID (SMD Switch)
- 16-channel Up Counter or Frequency Measurement. (Pulse Width = 2 μs Min.)
- Digital Filter: 1 ~ 32767 (μs)
- 32 Programmable Digital I/O Channels
- Pull-high and Pull-low Resistors for DI Channels
- ± 2 kV ESD Protection for each channels
The PCI-FC16U is a 32-bit hardware-type high-speed Counter/Frequency board that supports both the 3.3 V and the 5 V Universal PCI bus. The card provides 16 channels that can be individually configured for either frequency measurement or up-counter applications, and can support high-frequency signals up to 250 kHz. The PCI-FC16U board also includes 32 programmable Digital I/O channels.
The PCI-FC16U board includes an onboard Card ID switch that enables the board to be easily recognized via software if two or more boards are installed in the same computer. The pull-high/pull-low resistors allow the DI status to be predefined as either high or low instead of remaining floating if the DI channels are disconnected or interrupted.
This card support various OS versions, such as Linux, DOS and 32/64-bit Windows 10/8/7/2008/2003/XP. DLL and Active X control together with various language sample programs based on Turbo C++, Borland C++, Microsoft C++, Visual C++, Borland Delphi, Borland C++ Builder, Visual Basic, C#.NET, Visual Basic.NET and LabVIEW are provided in order to help users quickly and easily develop their own applications.
- DOS Lib and BC sample program (with source codes)
- DLL and OCX SDK for 32-bit and 64-bit Windows XP/2003/2008/7/8/10.
- VB/VC/Delphi/BCB/VB.NET/C#.NET/VC.NET/MATLAB sample programs with source codes.
- LabVIEW toolkit for Windows.
- Driver for Linux.
|Counter & Frequency|
|Mode||Counter & Frequency||16-ch Up Counter|
|Digital Noise Filter||16-ch Frequency|
|Isolated Input Leve||ON Voltage Level||+4.5 VDC ~ +30 VDC|
|OFF Voltage Level||+1 VDC Max.|
|Min. Pulse Width||2 μs|
|Input Frequency||1 Hz ~ (typically ) 250 kHz (both counter mode and frequency mode)|
where 250 kHz is calculated as followings:
Supposed that duty cycle = 50%, refer to Minimum Pulse Duration of High Level, we have pulse period = 2 μs x 2 = 4 μs, which is 250 kHz as a max.
Refer to Min. Pulse Duration of High Level, Max. Frequency is highly affected by duty cycle.
|Frequency Accuracy =± 0.4 %|
|Isolated Voltage||2500 VDC|
|ESD Protection||2 kV (Contact for each channel)|
|Input Voltage||Logic 0: 0.8 V (Max.)|
Logic 1: 2.0 V (Min.)
|Response Speed||1.0 MHz (Typical)|
|Output Voltage||Logic 0: 0.4 V (max.)|
Logic 1: 2.4 V (min.)
|Output Capability||Sink: 2.4 mA @ 0.8 V|
Source: 0.8 mA @ 2.0 V
|Response Speed||1.0 MHz (Typical)|
|Bus Type||3.3 V/5 V Universal PCI, 32-bit, 33 MHz|
|Card ID||Yes (4-bit)|
|I/O Connector||Female DB37 x 1|
20-pin box header x 2
|Dimensions (L x W x D)||170 mm x 88 mm x 22 mm|
|Power Consumption||700 mA @ 5 V Max.|
|Operating Temperature||0 ~ 60 °C|
|Storage Temperature||-20 ~ 70 °C|
|Humidity||5 ~ 85% RH, non-condensing|
|PCI-FC16U CR||Universal PCI, 16-channel Counter/Frequency Board with 32-channel Programmable DIO (RoHS)|
Includes one CA-4002 D-Sub connector.
|CA-2002||20-pin flat cable, 20 cm x 2|
|CA-2010||20-pin flat cable,1 M|
|CA-2020||20-pin flat cable 2 M.|
|CA-3710||DB-37 Male-Male D-sub cable 1 M (Cable for Daughter Board(45°))|
|CA-3710D||DB-37 Male-Male D-sub cable 1M (Cable for Daughter Board(180°))|
|CA-3715DM-H||DB-37 Male-Male Cable, 1.5 M, 180°. (RoHS)|
|CA-3730DM-H||DB-37 Male-Male Cable, 3.0 M, 180°. (RoHS)|
|CA-3750DM||DB-37 Male-Male Cable, 5.0 M, 180°. (RoHS)|
|CA-4002||37-pin Male D-sub connector with plastic cover.|
|DB-16P||16-channel Isolated Digital Input Daughter Board|
|DB-16R||16-channel Relay Output Daughter Board|
|DN-37||Screw Terminal Board for D-sub 37-pin Connector|
|DN-20||20-pin DIN-rail Mounting I/O Connector Board|