Bộ chuyển đổi 4 cổng RS-232/485/422(3IN1) sang 2 cổng Ethernet 3Onedata NP314T-4D(3IN1)
Features
Supports 4/8-channel RS-232/485/422 serial ports optional
Supports 1/2-port 10/100Base-T(X) Ethernet optional, the 2-port 10/100Base-T(X) Ethernet serial server supports two IP addresses and two MAC addresses
Supports 300bps~115200bps non-blocking communication
Supports WEB and serial port and other forms of configuration
Supports low power design, IP30 level protection
Supports metal shell, wall mounted installation
Support working temperature of -40~75℃
Introduction
The NP3XXT 3IN1 series are serial-to-Ethernet device servers that enable the serial device to have networking capabilities immediately. They support 4/8-port RS-232/485/422 serial port and 1/2-port 10/100Base-T(X) Ethernet interface optional. The serial device server can easily and centrally manage distributed serial devices and hosts through the network, support TCP, UDP, ARP, ICMP, HTTP, DNS and DHCP protocols, support virtual serial port driver access and network interrupts automatic recovery connection.
The NP3XXT 3IN1 series provide a powerful Windows platform-based management configuration tool and WEB management interface, which can guide the user to manage the device step by step. All the devices can be configured through the network or serial port, support gateway, cross-routing communication, user-friendly IP Address, server and client mode, packet size, and so on. Through a simple set of serial devices can be achieved immediately network.
The exterior design supports wall-mounted installation for ease of use.
Specification
Ethernet interface
Standard: 10Base-T, 100Base-TX
Protocol: Supports TCP, UDP, ARP, ICMP and DHCP
Signal: Rx+, Rx-, Tx+, Tx-
Speed: 10/100Mbps
Working: Full-duplex and half duplex
Working mode: TCP Server, TCP Client, UDP Server, UDP Client, UDP Multicast, UDP Rang, Pair Slave, Pair master and Real Com working mode
Interface form: RJ45
Serial interface
Serial port: RS-232/485/422
RS-232 signal: DSR, RTS, GND, TXD, RXD, DCD, CTS, DTR
RS-485 signal: D+, D-, GND
RS-422 signal: T+, T-, R+, R-, GND
Parity bit: None, Even, Odd, Space, Mark
Data bit: 5bit, 6bit, 7bit, 8bit
Stop bit: 1bit, 1.5bit, 2bit
Baud rate: 300bps～115200bps
Direction control: RS-485 using data flow automatic control technology
Load capacity: support 32 point polling environment (customizable 128 points)
Interface Connector
Ethernet port: RJ45
RS-232/485/422 serial port: RJ45
Transfer distance
Ethernet port: 100m (Standard CAT5/CAT5e cable)
RS-232 transfer distance: 15m
RS-485/422 transfer distance: 1200m
LED indicator
Run indicator: RUN
Power supply indicator: PWR
Ethernet Link/Act indicator: LINK
RS-232/485/422 port transmit data indicator: TX
RS-232/485/422 port receive data indicator: RX
Power supply
Input Voltage: 12~48VDC
Consumption
NP304T-4D(3IN1) -RJ45, NP314T-4D(3IN1) -RJ45
No-load consumption: 2.16W@12VDC
Full-load consumption: 3.00W@12VDC
NP308T-8D(3IN1) -RJ45, NP318T-8D(3IN1) -RJ45
No-load consumption: 1.8W@12VDC
Full-load consumption: 3.9W@12VDC
Mechanical Structure
Shell: IP30 protect grade, metal shell
Installation: wall mounting
Weight: 580g
Size (L×W×H): 170.0mm×110.0mm×31.5mm
Working environment
Working temperature: -40～75℃
Storage temperature: -40～85℃
Relative Humidity: 5%~95 %( no condensation)
Industry Standard
EMI: FCC Part 15, CISPR (EN55022) class A
EMS：
IEC 61000-4-2 (ESD), Level 4
Contact: 8 kV
Air: 15 kV
IEC 61000-4-4 (EFT), Level 3
Power: 2 kV
Signal: 1 kV
IEC 61000-4-5 (Surge), Level 3
Power: common mode 2 kV
different mode 1 kV
Signal: common mode 2 kV
different mode 1 kV
Shock: IEC 60068-2-27
Free fall: IEC 60068-2-32
Vibration: IEC 60068-2-6
Warranty: 3 years
Certification
CE, FCC, RoHS, UL508 (Pending)
| Standard model | RS-232/485/422(3IN1) | Fast Ethernet | 12~48VDC |
| NP304T-4D(3IN1) | 4 | 1 | |
| NP314T-4D(3IN1) | 4 | 2 | |
| NP308T-8D(3IN1) | 8 | 1 | |
| NP318T-8D(3IN1) | 8 | 2 |