Card ISA 32 kênh đầu vào số (DI) + 32 kênh đầu ra số (DO) ICP DAS ISO-P32S32W
Features
- 32-CH optical-isolated digital input
- 32-CH optical-isolated digital output
- Isolation Voltage: 3750 Vrms (Using external power)
- DC/DC converter build-in
- Interrupt handling
- Two Interrupt source, channel 0 and channel 16
- Open Collector: 500 mA (8-channel), 100 mA (24-channel), Current Sinking, NPN
Introduction
ISO-P32S32W has 32 channels of optical-isolated DI and 32 channels of optical-isolated open-collector output board (8-channel for 500 mA and 24-channel for 100 mA current sinking output, NPN), arranged into four isolated banks. Each input channel use a photo-coupler to isolate the card and computer from external signal. Each digital output offers a NPN transistor and integral suppression diode for inductive load. ISO-P32S32W requires external power to drive the D/I and D/O ports.
This interface board is easily installed in any PC. The board interface to field logic signals, eliminating ground-loop problems and isolating the host computer from damaging voltages. ISO-P32S32W has one 37-pin D-Sub connector and one 40-pin male header. The 40-pin to DB-37 flat cable is used to fix with the case. The user can connect the digital signal through the second D-Sub connector. Each D-Sub connector contains 16 input channels and 16 output channels.
Application
- Factory automation
- Product test
- Laboratory automation
Software
- DOS sample program(with source codes)
- DLL and OCX SDK for Windows 98/NT/2000
- DLL and OCX SDK for 32-bit Windows XP/2003/Vista/7
- VB/VC/Delphi/BCB sample programs with source codes are included
- LabVIEW toolkit for Windows
- Driver for DasyLab
Specification
Digital Input | |
Isolation Voltage | 3750 Vrms (Using external power) |
Channels | 32 |
Compatibility | Photo coupler isolated |
Input Voltage | Logic 0: 0 ~ 1 V Logic 1: 5 ~ 24 V |
Input Impedance | 3 KΩ, 0.5 W |
Response Speed | 4 kHz (Typical) |
Digital Output | |
Isolation Voltage | 3750 Vrms (Using external power) |
Channels | 32 |
Compatibility | Sink, Open Collector |
External Voltage | 5 ~ 30 VDC (max.) |
Output Capability | 500 mA for one high driving channel @ 100% duty 500 mA for all high driving channels @ 100% duty (The GND pins all must be connected with GND of External Power) |
100 mA for one low driving channel @ 100% duty 100 mA for all low driving channels @ 100% duty (The GND pins all must be connected with GND of External Power) |
|
Response Speed | 4 kHz (Typical) |
General | |
Bus Type | ISA |
Data Bus | 8-bit |
I/O Connector | Female DB37 x 1 40-pin Box header x 1 |
Dimensions (L x W x D) | 163 mm x 115 mm x 22 mm |
Power Consumption | 600 mA @ +5 V |
Operating Temperature | 0 ~ 60 °C |
Storage Temperature | -20 ~ 70 °C |
Humidity | 5 ~ 85% RH, non-condensing |
Ordering information
ISO-P32S32W CR | ISA Bus, 32-CH Optical-Isolated DI and 32-CH Optical-Isolated Open Collector Output Board (8-Channel for 500 mA and 24-Channel for 100 mA Current Sinking Output, NPN, RoHS) Includes one CA-4037W cable and two CA-4002 D-Sub connectors |