Card ISA 32 kênh đầu vào tương tự (AI) 200 kS/s 12-bit ICP DAS ISO-AD32L/S
Features
- Built-in DC/DC converter with 1000 VDC isolation
- 32 single-ended or 16 differential input channels, 5000 Vrms photo-isolation protections
- Maximum 200 k 12-bit sampling rate
- Built-in 1 KB FIFO
- Auto-channel / gain scan
- Command set programming
- Gap-free A/D conversion
Introduction
The ISO-AD32H/L ( H for high gain / L for low gain ) is a bus-type isolated 12-bit A/D board for PC/AT compatible computers. The isolation inputs can operate with up to 500 Vrms of common-mode voltage. The ISO-AD32H/L features a 200 kHz 12-bit analog-to-digital converter ,on board 1 KB FIFO buffer ,32 singled-ended or 16 differential analog input channels .The analog input allows auto-channel /gain scan . This board support gap-free A/D conversion at 200 kHz sampling rates for single channel or 100 kHz sampling rates for channel scan . The “Hands-Off” design permits all board parameters (channel selection, gain, input type, and operating mode ) to be performed in software . Once installed , you will never have to take care it again. The board’s innovative design improves several drawbacks of the conventional isolated A/D card . Such as : 1.The speed is faster ; up to 200 kHz 2. The sampling rate can be programmable 3. On board FIFO buffer support gap-free A/D conversion and work well under NT and 95 environment. 4. High channel count input can be implemented in half size.
Application
- Data acquisition
- Waveform analysis
- Harsh environment operation
- Signal isolation
Software
- DOS sample program(with source codes)
- DLL and OCX SDK for Windows 98/NT/2000
- DLL and OCX SDK for 32-bit Windows XP/2003/Vista/7
- VB/VC/Delphi/BCB sample programs with source codes are included
- LabVIEW toolkit for Windows
- Driver for Linux and DasyLab
Specification
| Analog Input | |
| Isolation Voltage | 500 Vrms (Photo-coupler) |
| Channels | 32 single-ended / 16 differential |
| A/D Converter | 12-bit, 5 μs conversion time |
| Sampling Rate | 200 kS/s. (max.) |
| FIFO Size | 1 KB |
| Over voltage Protection | Continuous +/- 35 Vp-p |
| Input Impedance | 10 MΩ / 6 pf |
| Trigger Modes | Software, Internal programmable pacer, External |
| Accuracy | 0.01 % of FSR ±1 LSB @ 25 °C, ± 10 V |
| Zero Drift | +/-25 ppm/°C of FSR |
| Analog Input Range | |||||
| Model |
ISO-AD32L (Lw-Gain)
|
||||
| Gain |
0.5
|
1
|
2
|
4
|
8
|
| Unipolar (V) |
0 ~ 10
|
0 ~ 5
|
0 ~ 2.5
|
0 ~ 1.25
|
|
| Bipolar (V) |
+/- 10
|
+/- 5
|
+/- 2.5
|
+/- 1.25
|
+/- 0.625
|
| Sampling Rate Max. |
200 kS/s
|
200 kS/s
|
200 kS/s
|
200 kS/s
|
200 kS/s
|
| Analog Input Range | ||||||||
| Model |
ISO-AD32H (High-Gain)
|
|||||||
| Gain |
0.5
|
1
|
5
|
10
|
50
|
100
|
500
|
1000
|
| Unipolar (V) |
0 ~ 10.0
|
0 ~ 1.0
|
0 ~ 0.1
|
0 ~ 0.01
|
||||
| Bipolar (V) |
+/- 10
|
+/- 5
|
+/- 1
|
+/- 0.5
|
+/- 0.1
|
+/- 0.05
|
+/- 0.01
|
+/- 0.005
|
| Sampling Rate Max. |
125 kS/s
|
125 kS/s
|
80 kS/s
|
80 kS/s
|
10 kS/s
|
10 kS/s
|
1 kS/s
|
1 kS/s
|
| General | |
| Bus Type | ISA |
| I/O Connector | Female DB37 x 1 |
| Dimensions (L x W x D) | 173 mm x 122 mm x 22 mm |
| Power Consumption | 850 mA @ +5 V (max.) |
| Operating Temperature | 0 ~ 50 °C |
| Storage Temperature | -20 ~ 70 °C |
| Humidity | 5 ~ 85% RH, non-condensing |
Ordering information
| ISO-AD32H | 32-channel/ 12-bit/ High Gain/ Bus Isolated Analog Input Board Includes one CA-4002 D-Sub connector. |
| ISO-AD32H/S | ISO-AD32H + DN-37 Includes one CA-3710 D-Sub cable. |
| ISO-AD32L | 32-channel/ 12-bit/ Low Gain/ Bus Isolated Analog Input Board Includes one CA-4002 D-Sub connector. |
| ISO-AD32L/S | ISO-AD32L + DN-37 Includes one CA-3710 D-Sub cable |