Card ISA 32 kênh vào/ra số + 32 kênh vào/ra số TTL ICP DAS ISO-730
Features
- 16-channel optically isolated digital input
- 16-chanel optically isolated open-collector output
- 16-channel TTL level digital input (Non-isolation)
- 16-channel TTL level digital output (Non-isolation)
- One 37-pin D-sub connector and two 20-pin headers for isolated I/O
- Two 20-pin header for TTL digital I/O (Non-Isolation)
- Built-in DC/DC converter with 3000 VDC isolation
- Interrupt handling
- Interrupt source : channel 0 and channel 16
- 3750 Vrms photo-isolation protection
Introduction
The ISO-730 card provide 32 isolated digital I/O channels (16 x DI and 16 x DO) and 32 TTL-level digital I/O channels (16 x DI and 16 x DO). Each of the 16 isolated digital input channel accept voltage from 5 V ~ 24 VDC and has a resistance of 1.2 kOhm. Every eight input channels use one external common ground. For example, channel 0 ~ 7 use EI.COM1 and channel 8 ~ 15 use EI-COM2. Each of the 16 isolated digital output channels equipped a darlington transistor. Every eight output channels use the common emitters. The power supply of the output port should use the external power. The channels 0 ~ 7 use EO-COM1 and channel 8 ~ 15 use EO-COM2. This interface board is easy installed in any PC/AT/XT. The board interface to field logic signed, eliminating ground loop problems and isolating the host computer from damaging voltages. The ISO-730 has one 37-pin D-sub connector and four 20-pin header. It is fully compatible to PCL-730
Application
- Factory Automation.
- Product Test.
- Laboratory Automation.
Software
- DLL and OCX SDK for Windows 98/NT/2000
- DLL and OCX SDK for 32-bit Windows XP/2003/Vista/7
- VB/VC/Delphi/BCB sample programs with source codes are included.
- LabVIEW toolkit for Windows.
- Driver for Linux and DasyLab.
Specification
| Digital Input | ||
| Isolation Voltage | 3750 Vrms | |
| Channels | Isolated | 16 |
| Non-Isolated | 16 | |
| Compatibility | Isolated | Optical |
| Non-Isolated | 5 V/TTL | |
| Input Voltage | Isolated | Logic 0: DC 0 ~ 1 V Logic 1: DC 9 ~ 24 V |
| Non-Isolated | Logic 0: 0.8 V (max.) Logic 1: 2.0 V (min.) |
|
| Input Impedance | 1.2 KΩ, 0.5 W | |
| Response Speed | Isolated | 10 kHz |
| Non-Isolated | 30 kHz | |
| Digital Output | ||
| Digital Output | 3750 Vrms | |
| Channels | Isolated | 16 |
| Non-Isolated | 16 | |
| Compatibility | Isolated | Sink, Open Collector |
| Non-Isolated | 5 V/TTL | |
| Output Voltage | Non-Isolated | Logic 0: 0.8 V (max.) Logic 1: 2.4 V (min.) |
| Output Capability | Isolated | Sink: 100 mA @ 30 VDC (max.) |
| Non-Isolated | Sink: 8 mA @ 0.5 V (max.) Source: 0.4 mA @ 2.4 V (min.) |
|
| Response Speed | Isolated | 10 kHz |
| General | ||
| Bus Type | ISA | |
| I/O Connector | Female DB37 x 1 Male DB9 x 4 |
|
| Dimensions (L x W x D) | 175 mm x 124 mm x 22 mm | |
| Power Consumption | 800 mA @ +5 V | |
| Operating Temperature | 0 ~ 60 °C | |
| Storage Temperature | -20 ~ 70 °C | |
| Humidity | 5 ~ 85% RH, non-condensing | |
Ordering information
| ISO-730 CR | 32-channel Isolated digital I/O and 32-channel TTL digital I/O Board. (RoHS) Includes one CA-4002 D-Sub connector. |
