Bộ chuyển đổi tín hiệu cảm biến đo rung kết nối Ethernet Modbus TCP ICP DAS iSN-701X-MTCP CR
Features
- Built-in 4 mA excitation current
- Support multiple sampling rate: 200kHz/100kHz/50kHz/20kHz/10kHz/5kHz
- LED indicators for sensor open and normal
- Data Format: RMS, Maximum, P-P, Crest Factor, FFT, Velocity
- Support Modbus TCP/RTU slave protocol
Introduction
iSN-701X-MTCP is a vibration signal converter with Ethernet and RS-485 communication interface. It has a built-in 4 mA excitation current to power the integrated electronic piezoelectric (IEPE) accelerometers and 16-bit A/D Converter, and provide a sampling rate of up to 200kHz. iSN-701X-MTCP converts Vibration signals into multiple feature values. Users can obtain the feature values through the Modbus TCP/Modbus RTU. The iSN-701X-MTCP module is recommended as your best choice for vibration monitoring and measurement.
Applications
- Big data analysis
- System monitoring
- Trend analysis
- Predictive maintenance
Specifications
| LED Indicators | |
|---|---|
| Status | 1 X PWR 1 X IEPE 1 X DAQ |
| Analog Input | |
|---|---|
| Channels | 1 |
| Type | IEPE |
| Range | Voltage: ±10 V Current: 4 mA |
| Resolution | 16 bit |
| Sampling Rate | 5, 10, 20, 50, 100, 200 (kHz) |
| COM Ports | |
|---|---|
| Ports | 1 x RS-485 |
| Baud Rate | 115200 bps Max. |
| Protocol | Modbus RTU |
| Ethernet | |
|---|---|
| Ports | 1 x RJ-45, 10/100Base-T(X) |
| Protocol | Modbus TCP |
| Power | |
|---|---|
| Input Range | +10 ~ +30 VDC |
| Consumption | 4.3 W |
| Mechanical | |
|---|---|
| Dimensions (mm) | 25 mm x 120 mm x 117 mm (W x L x H) |
| Installation | Din-Rail |
| Environment | |
|---|---|
| Operating Temperature | -25 ~ +75 °C |
| Storage Temperature | -30 ~ 80 °C |
| Humidity | 10 ~ 90% RH, non-condensing |
Ordering Information
| iSN-701X-MTCP CR | Modbus TCP, Vibration signal to Modbus slave converter, 1 channel (RoHS) |