Phần mềm phát triển lập trình nhúng PAC ICP DAS ISaGRAF
What is ISaGRAF?
ISaGRAF is the most powerful SoftLogic package on the market. ISaGRAF is a PLC-like software running on Windows 95, 98, NT 2000, XP, Vista and Windows7.
It supports IEC 61131-3 standard PLC programming languages – Quick Ladder (LD), Function Block Diagram (FBD), Sequential Function Chart (SFC), Structured Text (ST), Instruction List (IL) plus Flow Chart (FC) and can run the application generated by the workbench on any ISaGRAF PACs. Additionally, for the ultimate in power and flexibility, ISaGRAF supports off-line simulation, on-line debugging, monitoring, and control.

Ordering Information
| ISaGRAF Development Software | |
|---|---|
| ISaGRAF-256 | ISaGRAF Workbench Software Ver.3 (256 I/O Tags) with one USB Dongle |
ISaGRAF is the most powerful SoftLogic package on the market. ISaGRAF software is composed of three features:
(1) All-in-one design environment:
(2) Provide six PLC syntax:
(3) Easily integrate into the HMI software and MMI:

ISaGRAF Workbench
The ISaGRAF workbench software includes the following syntax:
Text Editors for programming:
- Structured Text

- Instruction List

Graphical Editors for programming:
- Quick Ladder Diagram

- Function Block Diagram

- Sequential Function Chart

- Flow Chart

Software Features
- Uploading the Program in the Controller
- Online Debug/Control/Monitor
- Offline Simulation
- Lock & Unlock I/O
- Online Change
- Auto-scan I/O
- Spotlight: Simple HMI
- Backup and Restoration of Applications
- Graphic Debugging Animation

Uploading the Program in the Controller
Online Debug/Control/Monitor
Offline Simulation
Lock & Unlock I/O
Online Change
Auto-scan I/O
Simple HMI
Backup and Restoration of Applications
Graphic Debugging Animation
The following PAC fully supports all five of the IEC61131-3 standard PLC languages:
1. Ladder diagram
2. Function block diagram
3. Sequential function chart
4. Structured text
5. Instruction list
6. Flow chart
It supports Modbus protocol and can link to distributed I/O modules with Modbus or DCON protocol via the RS-232/485 or Ethernet.
|
|
||||||||||||
|
ISaGRAF based XP-8000-CE6 Series PAC
|
||||||||||||
| Model | OS | Pre-Installed Software |
CPU | System Memory | Non-Volatile Memory | Storage | VGA Resolution |
Ethernet Port |
USB Port | RS-232/ RS-485 |
I/O Slot | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| XP-8037-CE6 | WinCE 6.0 | ISaGRAF | x86 CPU,1 GHz,dual-core | 2 GB DDR3 SDRAM | 512 KB MRAM, 16 KB EEPROM | 32 GB Flash, 8 GB CF card |
640 x 480, 800 x 480, 800 x 600, 1024 x 7686
|
2 | 4 | 5 | – | |
| XP-8137-CE6 | 4 | 1 | ||||||||||
| XP-8337-CE6 | 3 | |||||||||||
| XP-8737-CE6 | 7 | |||||||||||
|
|
||||||||||||
|
ISaGRAF based WP-8000 Series PAC
|
||||||||||||
| Model | OS | Pre-Installed Software | CPU | System Memory | Non-Volatile Memory | Storage | Ethernet Port |
USB Port | RS-232/ RS-485 |
I/O Slot | ||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| WP-8147 | WinCE 5.0 | ISaGRAF | PXA270 or compatible, 32-bit, 520 MHz | 128 MB SDRAM | 16 KB EEPROM, 512 KB Dual battery backup SRAM |
96 MB Flash, 4 GB microSD card
|
2 | 1 | 2 | 1 | ||
| WP-8447 | 4 | 4 | ||||||||||
| WP-8847 | 4 | 8 | ||||||||||
|
|
||||||||||
|
ISaGRAF based 8000 Series PAC
|
||||||||||
| Model | OS | Pre-Installed Software |
CPU | SRAM | Flash | EEPROM | Storage | Ethernet Port |
RS-232/ RS-485 |
I/O Slot |
|---|---|---|---|---|---|---|---|---|---|---|
| iP-8417 | MiniOS7 | ISaGRAF | 80186 or compatible, 16-bit and 80 MHz | 512 KB | 512 KB | 16 KB | 4 GB microSD card | – | 4 | 4 |
| iP-8817 | 8 | |||||||||
| iP-8447 | 768 KB | 2 | 4 | |||||||
| iP-8847 | 8 | |||||||||
| I-8437-80(-G) | 80186 or compatible, 16-bit and 80 MHz | 512 KB | 512 KB | 2 KB | – | 1 | 4 | 4 | ||
| I-8837-80(-G) | 8 | |||||||||
| I-8417(-G) | 80188 or compatible, 8-bit and 40 MHz | – | 4 | |||||||
| I-8817(-G) | 8 | |||||||||
|
|
|||||||||||
|
ISaGRAF based uPAC
|
|||||||||||
| Model | OS | Pre-Installed Software |
CPU | SRAM | Flash | EEPROM | DI | DO | Ethernet Port |
RS-232/RS-485 | I/O Expansion |
|---|---|---|---|---|---|---|---|---|---|---|---|
| uPAC-7186EG | MiniOS7 | ISaGRAF | 80186, 80 MHz | 640 KB | 512 KB | 16 KB | – | – | 1 | 2 | X-board (Note) |
| uPAC-7186EGD | |||||||||||
| I-7188EG | 80188, 40 MHz | 512 KB | – | – | |||||||
| I-7188EGD | |||||||||||
| I-7188XG | 2 KB | 1 | 1 | – | |||||||
| I-7188XGD | |||||||||||
| Note: The I/O Expansion Bus can mount one X-board only. | |||||||||||
Application
-
eLogger HMI
| Model | XP-8×37-CE6 | WP-8×47 | iP-8xx7 | I-8xx7 | uPAC-7186EG | I-7188EG | I-7188XG |
|---|---|---|---|---|---|---|---|
| Support | ![]() |
– | – | – | – | – | – |
| eLogger is a free of charge and an easy-to-use HMI software platform developed by ICP DAS. It can be used to design the Local HMI and the Web Server HMI for remotely controlling the PAC through a web browser on your PC or cell phone.
Related ISaGRAF FAQ: 115 |
|||||||
![]() |
|||||||
-
Measure Humidity and Temperature Values via DL-100TM485
| Model | XP-8×37-CE6 | WP-8×47 | iP-8xx7 | I-8xx7 | uPAC-7186EG | I-7188EG | I-7188XG |
|---|---|---|---|---|---|---|---|
| Support | ![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
| * ISaGRAF PACs support Modbus RTU protocol to read humidity and temperature values from the DL-100TM485. The DL-100TM485 is a temperature and humidity data logger module that can be applied to smart buildings, hospitals, museums, the greenhouse, etc.
Related ISaGRAF FAQ: 156 |
|||||||
![]() |
|||||||
-
Schedule Control
| Model | XP-8×37-CE6 | WP-8×47 | iP-8xx7 | I-8xx7 | uPAC-7186EG | I-7188EG | I-7188XG |
|---|---|---|---|---|---|---|---|
| Support | ![]() |
![]() |
– | – | – | – | – |
| * The ISaGRAF WinCE-based PAC supports Schedule Control. Users just need a few simple steps to configure the date events, e.g., ‘normal days’, ‘weekends’, ‘special holidays’, ‘make-up workdays’, and ‘four seasons’ to meet the complex scheduling control needs. * One ISaGRAF PAC can control many Schedules for a maximum of 10 control devices (Target). * Each control device (Target) can control one Boolean, one Integer, and one Real variable.Related ISaGRAF FAQ: 166 |
|||||||
![]() |
|||||||
-
Database Application
| Model | XP-8×37-CE6 | WP-8×47 | iP-8xx7 | uPAC-7186EG | I-7188EG | I-7188XG |
|---|---|---|---|---|---|---|
| Support | ![]() |
![]() |
– | – | – | – |
| * ISaGRAF XPAC supports SQL Client functions to write data to (or read data from) Microsoft SQL Servers (2000 SP3, 2005, 2008). * One PAC can connect up to 4 Servers. * Integrating Machine-Business Automation Application.Related ISaGRAF FAQ: 135 |
||||||
![]() |
||||||
-
3G/4G Wireless Application
| Model | XP-8×37-CE6 | WP-8×47 | iP-8xx7 | I-8xx7 | uPAC-7186EG | I-7188EG | I-7188XG |
|---|---|---|---|---|---|---|---|
| Support | ![]() |
![]() |
– | – | – | – | – |
| * ISaGRAF XPAC can communicate with remote Server by 3G/4G wireless modem.
Related ISaGRAF FAQ: 153, 151, 143, 113, 111 |
|||||||
![]() |
|||||||
-
GPS Applications: Using ISaGRAF PAC with I-87211W or GPS-721
| Model | XP-8×37-CE6 | WP-8×47 | iP-8xx7 | I-8xx7 | uPAC-7186EG | I-7188EG | I-7188XG |
|---|---|---|---|---|---|---|---|
| Support | ![]() |
![]() |
![]() |
– | ![]() |
– | – |
| * These ISaGRAF PACs support one I-87211W or GPS-721 to automatically synchronize the system time and get a location’s Longitude and Latitude.
Related ISaGRAF FAQ: 107 |
|||||||
![]() |
|||||||
-
Integrate with CAN/CANopen Devices
| Model | XP-8×37-CE6 | WP-8×47 | iP-8xx7 | I-8xx7 | uPAC-7186EG | I-7188EG | I-7188XG |
|---|---|---|---|---|---|---|---|
| Support | ![]() |
![]() |
![]() |
– | ![]() |
– | – |
* These ISaGRAF PACs support the I-8123W CANopen Master module to control the CANopen Slave devices.
Related ISaGRAF FAQ: 145, 86 |
|||||||
![]() |
|||||||
-
Local and Remote I/O
| Model | XP-8×37-CE6 | WP-8×47 | iP-8xx7 | I-8xx7 | uPAC-7186EG | I-7188EG | I-7188XG |
|---|---|---|---|---|---|---|---|
| Support | ![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
* ICP DAS provides a range of I/O modules for industrial monitoring and controlling applications. There are various communication interfaces and protocols for choice in I/O applications.
* Using RS-232/422/485 expansion module to add COM port.
* uPAC series has an I/O expansion bus which can plug One I/O expansion board.
|
|||||||
![]() |
|||||||
-
ISaGRAF PAC Connects the Intelligent Power Meter
| Model | XP-8×37-CE6 | WP-8×47 | iP-8xx7 | I-8xx7 | uPAC-7186EG | I-7188EG | I-7188XG |
|---|---|---|---|---|---|---|---|
| Support | ![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
| * The ISaGRAF PAC supports the Modbus RTU Master protocol to connect the ICP DAS power meter via RS-485 port. * Recommend connecting no more than 30 power meters for one RS-485 port. * The application is suitable for the power measurement control systems in small or medium-sized stores, buildings, and factories with electric equipment.Related ISaGRAF FAQ: 129 |
|||||||
![]() |
|||||||
-
Redundant Communication System
| Model | XP-8×37-CE6 | WP-8×47 | iP-8xx7 | I-8xx7 | uPAC-7186EG | I-7188EG | I-7188XG |
|---|---|---|---|---|---|---|---|
| Support | ![]() |
![]() |
– | – | – | – | – |
| * In many application control systems, the monitored/controlled devices are scattered and some may be very far away. Therefore, most of these applications are divided into one central control station and some distributed local control stations.
* Many applications cannot allow any communication breakdown that will occur to a lot of costs and risks. ICP DAS provides Ethernet and RS-485 redundant communication mechanisms to solve the problem. Related ISaGRAF FAQ: 119, 113 |
|||||||
![]() |
|||||||
-
Redundant System with I/O
| Model | XP-8×37-CE6 | WP-8×47 | iP-8xx7 | I-8xx7 | uPAC-7186EG | I-7188EG | I-7188XG | ||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Support | ![]() |
![]() |
– | – | – | – | – | ||||||
| Note: iDCS-8000 system is not available for WP-8×47.
* PC/HMI/SCADA can just connect one IP address (the“Active_IP1”) to access the XPAC redundant system. If the active PAC is damaged, the other PAC will take over in 1 second. Related ISaGRAF FAQ: 125, 138 |
|||||||||||||
|
|||||||||||||
-
ZigBee Wireless Solution
| Model | XP-8×37-CE6 | WP-8×47 | iP-8xx7 | I-8xx7 | uPAC-7186EG | I-7188EG | I-7188XG |
|---|---|---|---|---|---|---|---|
| Support | ![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
| * ZigBee wireless solution is suitable for the requirement of the remote (long/short distance) communication systems that need communicate via RS-232 or RS-485 but are in the unable (or difficult) wiring areas, such as factories, no rural areas, reservoirs, expensive cities, inside the building, school and so on.
* ZT-2550 and ZT-2551 wireless converters, RS-232/RS-485 to ZigBee, will help you to solve the above problems, reduce the wiring cost, and achieve the mission of remote I/O control and data acquisition. Visit to the Zigbee webpage for more information. |
|||||||
![]() |
|||||||
-
Modbus Master/Slave Protocol
| Model | XP-8×37-CE6 | WP-8×47 | iP-8xx7 | I-8xx7 | uPAC-7186EG | I-7188EG | I-7188XG |
|---|---|---|---|---|---|---|---|
| Support | ![]() |
![]() |
(Note) |
(Note) |
![]() |
![]() |
(Note) |
| Note: Modbus TCP/IP Slave protocol is not available for iP-8×17, I-8×17 and I-7188XG.
1) Modbus RTU/ASCII Master Port
2) Modbus RTU Slave Port
3) Modbus TCP/IP Slave Port
|
|||||||
![]() |
|||||||
-
Modbus TCP/IP Master
| Model | XP-8×37-CE6 | WP-8×47 | iP-8xx7 | I-8xx7 | uPAC-7186EG | I-7188EG | I-7188XG |
|---|---|---|---|---|---|---|---|
| Support | ![]() |
![]() |
– | – | – | – | – |
| * XPAC supports Modbus TCP/IP Master Protocol to link to various Standard Modbus TCP/IP Slave devices. * XPAC supports up to 100 Modbus TCP/IP Slave devices.Related ISaGRAF FAQ: 113 |
|||||||
![]() |
|||||||
-
SMS: Short Message Service
| Model | XP-8×37-CE6 | WP-8×47 | iP-8xx7 | I-8xx7 | uPAC-7186EG | I-7188EG | I-7188XG |
|---|---|---|---|---|---|---|---|
| Support | ![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
| * ISaGRAF PACs can integrate with a GSM Modem to support SMS (Short Message Service). Users can request information or perform control tasks for the ISaGRAF PAC via a smartphone. * Information and alarms can also be sent from the PAC to the smartphone. The short message can be sent in multiple language formats (e.g., Chinese, English, and so on).Related ISaGRAF FAQ: 111 |
|||||||
![]() |
|||||||
-
Data Recorder and Data Logger
| Model | XP-8×37-CE6 | WP-8×47 | iP-8xx7 | I-8xx7 | uPAC-7186EG | I-7188EG | I-7188XG |
|---|---|---|---|---|---|---|---|
| Support | ![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
| * Data, date & time can be stored in memory such as SRAM, Flash, microSD, optional X-board, and then PC can load data via a communication interface (e.g., RS-232, RS-485, and Ethernet). | |||||||
![]() |
|||||||
-
Data Exchange: Fbus or Ebus
| Model | XP-8×37-CE6 | WP-8×47 | iP-8xx7 | I-8xx7 | uPAC-7186EG | I-7188EG | I-7188XG |
|---|---|---|---|---|---|---|---|
| Support | (Note) |
![]() |
(Note) |
(Note) |
![]() |
![]() |
(Note) |
| Note: 1) Ebus is not available for iP-8x17, I-8x17, and I-7188XG.2) Fbus is not available for XP-8×37-CE6, WP-8×47 and iP-8x17.
ISaGRAF PACs can communicate with each other through an Ethernet port by using the Ebus protocol. When PC is communicating with PACs via Ethernet, any PAC on the same network can still change data with each other. This makes the configuration more flexible and faster. (Related ISaGRAF FAQ: 109)
ISaGRAF PACs can communicate with each other through an RS-485 port by using the Fbus protocol. Fbus can be used to broadcast data to each PAC. Also, any PAC on the same Fbus network can send or receive data from/to each other. |
|||||||
![]() |
|||||||
-
VIP Communication Security
| Model | XP-8×37-CE6 | WP-8×47 | iP-8xx7 | I-8xx7 | uPAC-7186EG | I-7188EG | I-7188XG |
|---|---|---|---|---|---|---|---|
| Support | ![]() |
![]() |
(Note) |
(Note) |
![]() |
![]() |
– |
| Note: The function is not available for iP-8x17, I-8x17.
* Set VIP (Very Important IP No.) for Modbus TCP/IP security. |
|||||||
![]() |
|||||||
-
Using PAC as a Modbus Gateway for Remote I/O Modules
| Model | XP-8×37-CE6 | WP-8×47 | iP-8xx7 | I-8xx7 | uPAC-7186EG | I-7188EG | I-7188XG |
|---|---|---|---|---|---|---|---|
| Support | ![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
| * ISaGRAF PACs can be used as a Modbus RTU or a TCP/IP gateway to access data for I-7000 and I-87K Series remote I/O modules. | |||||||
![]() |
|||||||
-
PID Control
| Model | XP-8×37-CE6 | WP-8×47 | iP-8xx7 | I-8xx7 | uPAC-7186EG | I-7188EG | I-7188XG |
|---|---|---|---|---|---|---|---|
| Support | ![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
| * ISaGRAF PACs support the PID control, refer to the reference document for more details. | |||||||
![]() |
|||||||























