Bộ chuyển đổi quang điện 1 cổng RS-232/422/485 sang 2 cổng quang 3Onedata IMF2100-2F-1DI(3IN1)-TB-P(85-265VAC)

DIN-Rail Mounting 1-port RS-232/485/422 to Fiber Converter

Vendor: 3Onedata

Bộ chuyển đổi quang điện 1 cổng RS-232/422/485 sang 2 cổng quang 3Onedata IMF2100-2F-1DI(3IN1)-TB-P(85-265VAC)

IMF2100 series are 1/2 fiber ports + 1 RS-232/485/422 serial to fiber MODEM. They convert RS-232/485/422 serial port signal to optical signal and provide users with RS-232/485/422 serial port to implement transparent end-to-end transmission. This series provide 1 or 2 fiber ports with ring network function, 1 RS-232/485/422 serial port and multiple optional power solutions like 85~265VAC, 110~370VDC or 12-48VDC (single/dual power supply). They adopt DIN-Rail mounting, which can meet the requirements of different scenes.

The DIP switch could implement functions like Master/Slave option, RS-485 terminal resistance enablement, relay alarm of power failure and fiber optics disconnection (notes: power supply alarm is only for dual power supply product), etc. when fiber optics disconnects or dual power supply fails, ALM indicator would be bright and send alert, at the same time the alarm device connecting to the relay would sent alert for quick trouble shooting on the scene. Hardware adopts fanless, low power consumption, wide temperature and voltage design and has passed rigorous industrial standard tests, which can suit for the industrial scene environment with harsh requirements for EMC. It can be widely used in various situations like industrial control, process control, traffic control and intelligent residential district, and particularly applicable to bank, electricity, departments and systems that have special requirements relating to electromagnetic interference environment.

Features

Support 1/2 fiber ports and 1 RS-232/485/422 serial port with isolation

Support 1 relay alarm output for power failure and disconnection of fiber optics

Support multiple optional power solutions including 85~265VAC, 110~370VDC or 12-48VDC (single/dual power supply)

Support -40～75℃ wide operating temperature range

Specification

Fiber Port

Interface quantity: 1/2 (support ring network)

Fiber port: optional SC/FC/ST interface

Transmission distance:

Multimode: 2km

Single mode: 20/40/60km

Transmission wavelength:

Multimode: 1310nm

Single mode: 1310nm or 1550nm

Serial Port

Standard: EIA RS-232C, RS-485, RS-422

Serial port: 1 RS-232/485/422 serial port, can’t be used simultaneously

RS-232 signal: RXD, TXD, GND

RS-485 signal: D+, D-, GND

RS-422 signal: T+, T-, GND, R+, R-

Baud rate: 300~115200bps

Data bit: 5bit, 6bit, 7bit, 8bit

Stop bit: 1bit, 1.5bit, 2bit

Check bit: None, Even, Odd, Space, Mark

Interface type: 7-pin 3.81mm pitch terminal block

Direction control: RS-485 adopts automatic data flow control technology

Load capacity: RS-485 supports 32-point polling environment (128-point could be customized)

RS-485 pull up/down resistor: 4.7kΩ

RS-485 terminal resistance: built-in 120Ω, could be controlled by DIP switch

Transmission distance: RS-232 serial port, 15m；

RS-485/422 serial port, 1200m

Relay

Relay quantity: 1 relay alarm output

Connection method: 6-pin 5.08mm pitch terminal block(relay occupies 2 pins)

Current load: 1A@30VDC, 0.3A@125VAC

Default relay status: normally open

LED Indicator

Power Supply Indicator, Fiber Port Connection Indicator, Master/Slave Indicator, Alarm Indicator, Serial Port Data Receiving Indicator, Serial Port Data Sending Indicator

Power

Requirement

Support four optional power solutions, 12~48VDC (single power supply), 12~48VDC (dual power supply), 110~370VDC or 85~265VAC

Solution 1

Power supply range: 12~48VDC

Connection method: 6-pin 5.08mm pitch terminal blocks (power supply occupies 4 pins)

Power supply protection: built-in 2.0A over-current protection and non-polarity

Power supply redundancy: support

Solution 2

Power supply range: 12~48VDC

Connection method: 6-pin 5.08mm pitch terminal blocks (power supply occupies 2 pins)

Power supply protection: built-in 2.0A over-current protection and non-polarity

Solution 3

Power supply range: 110~370VDC

Connection method: 6-pin 5.08mm pitch terminal blocks (power supply occupies 2 pins)

Power supply protection: built-in 2.0A over-current protection and non-polarity

Solution 4

Power supply range: 85~265VAC

Connection method: 6-pin 5.08mm pitch terminal blocks (power supply occupies 2 pins)

Power supply protection: built-in 2.0A over-current protection

Power

Consumption

No-load: ≤3.0W@24VDC

Full-load: ≤3.4W@24VDC

Environmental

Limit

Operating temperature: -40~75℃

Storage temperature: -40~85℃

Relative humidity: 5%～95%(no condensation)

Physical

Characteristic

Housing: IP40 protection, metal

Installation: DIN-Rail mounting

Weight: ≤360g

Dimension (W x H x D): 35mm×110mm×95mm

Industrial Standard

IEC 60950-1 / EN 60950-1: Safety

EN 55032: Conducted & Radiated Disturbances

IEC 61000-3-2 Harmonic Current Emission

IEC 61000-3-3 Voltage Fluctuation & Flicker

EN 55024

IEC 61000-4-2

IEC 61000-4-3

IEC 61000-4-4

IEC 61000-4-5

IEC 61000-4-6

IEC 61000-4-8

IEC 61000-4-11

Certification

CE, FCC, RoHS

Dimension

Unit:mm

IMF2100-1F-1DI(3IN1)-TB-P(12-48VDC), IMF2100-1F-1DI(3IN1)-TB-P(85-265VAC)

IMF2100-2F-1DI(3IN1)-TB-2P(12-48VDC)

IMF2100-2F-1DI(3IN1)-TB-P(110-370VDC), IMF2100-2F-1DI(3IN1)-TB-P(85-265VAC)

Ordering Information

Available Models	Fiber Port	RS-232/485/422	Power Supply Range
IMF2100-1F-1DI(3IN1)-TB-P(12-48VDC)	1	1	12~48VDC (single power supply)
IMF2100-1F-1DI(3IN1)-TB-P(12-48VDC)	1	1	12~48VDC (dual power supply)
IMF2100-2F-1DI(3IN1)-TB-P(110-370VDC)	2	1	110~370VDC
IMF2100-1F-1DI(3IN1)-TB-P(85-265VAC)	1	1	85~265VAC
IMF2100-1F-1DI(3IN1)-TB-P(12-48VDC)	1	1	85~265VAC

Datasheet

Manual