Bộ thu phát không dây công nghiệp Access Point 3Onedata IAP2300-2N2-5T-2LVI
IAP2300-2N2-5T-2LVI is industrial wireless AP. This product supports 1 WAN port, 4 LAN ports and 2 antenna interfaces, etc. It adopts DIN-Rail mounting, which can meet the requirements of different application scenes.
The device supports four working modes: routing, AP, bridge and client. Support IEEE802.11b/g/ n wireless technology, wireless transmission rate up to 300Mbps; Support WPA, WPA2, WPA3 and other wireless encryption methods, with SSID hiding, wireless user isolation, MAC address filtering, ARP binding, DMZ settings and other security policies; Support for virtual APS, where a single AP device supports multiple SSIDs.
The input power supply is two independent power supply circuits which can ensure the normal operation of the device when one power supply fails. DIP switch can achieve one-key reboot and factory default recovery. When power supply or port has link failure, ALARM indicator would be bright and send alerts for quick troubleshooting on the scene. This product adopts fanless, low power consumption, wide temperature wide pressure industrial grade design, which can adapt to the harsh environment. It can be widely used in rail transit, security, smart city, integrated pipe gallery, production automation, smart lamp pole and other industries.
Features
- Support 1 WAN port, 4 LAN ports and 2 WIFI antenna interfaces, etc
- Support four work modes including routing, AP, network bridge and client
- Support dual power supply redundancy, power supply has non-polarity protection, input voltage: 12~36VDC
- Support -40~75℃ wide operating temperature range
Specification
| Standard & Protocol | IEEE 802.3 for 10Base-T
IEEE802.3u for 100Base-TX IEEE802.11b/g/n/a/ac for WLAN IEEE802.11i for wireless security IEEE802.11r for fast roaming IEEE802.3af/at for PoE/PoE+ |
| Working Mode | Route mode, AP mode, bridge mode, client mode |
| Network Settings | Intranet Settings, External Network Settings, Wireless Settings, Wireless Probe, AC Management, SNMP Management, QoS Management, Roaming Agent |
| Wireless Client | User list, user event |
| Firewall
(Route mode/Wireless NAT) |
IP filtering, MAC filtering, URL filtering, port forwarding, Port redirection, ARP binding, DMZ settings |
| System Tools | Network detection, User settings, System upgrading, System Restart, System log |
| Radio Frequency | 802.11b/g/n:2.412GHz~2.4835GHz
802.11ac/n/a:5.18GHz~5.825GHz RF power output: 20dBm Modulation methods: DBPSK, DQPSK, CCK, OFDM, 16-QAM, 64-QAM |
| Receiving Sensitivity | 802.11n_HT40:-82dBm@MCS0, -64dBm@MCS7
802.11n_HT20:-85dBm@MCS0, -67dBm@MCS7 802.11g/a:-91dBm@6Mbps, -72dBm@54Mbps 802.11b:-93dBm@1Mbps, -87dBm@11Mbps 802.11ac:-84dBm@MCS0, -59dBm@MCS9 |
| Transmitting Power | 802.11n_HT40:20dBm@MCS0, 20dBm@MCS7
802.11n_HT20:20dBm@MCS0, 20dBm@MCS7 802.11g/a:20dBm@6Mbps, 20dBm@54Mbps 802.11b:20dBm@1Mbps, 20dBm@11Mbps 802.11ac:20dBm@MCS0, 20dBm@MCS9 |
| Interface | WAN port: 1 10/100 Base-T(X) RJ45port, support POE 48VDC power supply input
LAN port: 4 10/100Base-T(X) RJ45 ports Antenna: 2 2.4G RP-SMA-K (Female) interfaces 2 5.8G RP-SMA-K (Female) interfaces Console port: CLI command management port(RS-232), RJ45 |
| Power Supply | 12~48VDC dual power supply redundancy, support non-polarity, 4-pin 5.08mm pitch terminal block;
WAN port supports PoE 48VDC power supply input |
| Indicator | Running indicator, Alarm indicator, Power indicator, 2.4G indicator, 5.8G indicator, WLAN bridge signal strength indicator, PoE indicator |
| Power Consumption | No-load: 3.0W@24VDC
Full-load: 7.9W@24VDC(high temperature) |
| Working Environment | Operating temperature: -40~75℃
Storage temperature:-40~85℃ Relative humidity: 5%～95%(no condensation) |
| Physical Characteristic | Housing: IP40 protection, metal
Installation: DIN-Rail mounting Weight: 0.57kg Dimension (W x H x D): 35mm×150mm×120mm |
| Industrial Standard | IEC 61000-4-2 (ESD, electrostatic discharge), Level 3
IEC 61000-4-4 (EFT, electrical fast transient pulses), Level 3
IEC 61000-4-5 (Surge), Level 3
Shock: IEC 60068-2-27 Free fall: IEC 60068-2-32 Vibration: IEC 60068-2-6 |
| Authentication | CE, FCC, RoHS |
Ordering information
| Model | WAN Port | LAN Port | WIFI Antenna Interface | Power Supply |
| IAP2300-2N2-5T-2LVI | 1 | 4 | 2 | 12~36VDC |
| Type | P/N | Gain (dBi) | Count (pcs) | Remark |
| 2.4G wireless | 3005040056 | 5 | 2 | Standard |
Optional Accessories
| Type | Specification |
| 2.4G wireless | P/N 3005040076, gain value 7dBi |
| Sucker + Feeder | P/N 3005040096, frequency range 0-6GHz, cable-side connector RP-SMA-J, sucker-side connector RP-SMA-K, cable length 3m, wire RG-58, wire diameter 5mm |
| Sucker + Feeder | P/N 3005040093, frequency range 0-6GHz, cable-side connector RP-SMA-J, sucker-side connector RP-SMA-K, cable length 5m, wire RG-58, wire diameter 5mm |